close

Enter

Log in using OpenID

AcuAMP AC Current Sensing Transducers ACTR Tech Specs

embedDownload
Prices as of October 22, 2014. Check Web site for most current prices.
AC Current Switches,
Transducers and Indicators
Overview
The AcuAMP series of AC current sensors
is a family of high-performance current
sensors offering outstanding features,
flexibility, and durability at an incredible
price. Choose from a wide selection of
current transducers, switches and indicators, all designed in a rugged industrystandard feed-through package,
including both fixed core and split core
models.
AcuAMP current sensors are available
with a broad selection of input sensing
ranges for maximum flexibility across
many current ratings. The current transducer output choices include 4-20mA,
24VDC loop-powered, and 0 to 10
volt self-powered analog outputs. The
Current Switch outputs are isolated
solid state switches and are available in
Normally Open and Normally Closed
configurations.
Models with output time delay are also
offered in the Current Switch series.
The ACL1 Current Indicator senses AC
current ranging from 0.5 to 100A and
requires no power for the indicating LED.
These current sensors can be mounted
in a panel (convenient DIN rail adapter
accessory is available) or attached to the
monitored conductor with a wire tie. Use
the Selection Guide below to find the
best sensor for your requirements.
Selection Guide
AcuAMP AC Current Transducer Specifications by Model Type
Specifications
Model
Input Range
Output
Frequency Range
Response Time
Sensing Aperture
Transducer
ACT
Transducer (True RMS)
ACTR
Jumper selectable:
ACT005: 0 to 2A
0 to 5A
ACT050: 0 to 10A
0 to 20A
0 to 50A
ACT200: 0 to 100A
0 to 150A
0 to 200A
ACT750: 0 to 375A
0 to 500A
0 to 750A
ACT2000: 0 to 1000A
0 to 1333A
0 to 2000A
Jumper selectable (fixed and split core):
ACTR005: 0 to 2A
0 to 5A
ACTR050: 0 to 10A
0 to 20A
0 to 50A
ACTR200: 0 to 100A
0 to 150A
0 to 200A
ACTR750: 0 to 375A
0 to 500A
0 to 750A
ACTR2000: 0 to 1000A
0 to 1333A
0 to 2000A
Fixed range (flexible split core):
ACTR500: 0 to 500A
ACTR1000: 0 to 1000A
ACTR2000: 0 to 2000A
-10 models: 0–10 VDC, self-powered
-42L models: 4–20 mA,
loop-powered
4–20 mA,
loop-powered true RMS
-10 models: 50 to 60 Hz
-42L models: 20 to 100 Hz
sinusoidal waveforms only
10 to 400 Hz; (40 to 400 Hz flexible split core models)
sinusoidal and non-sinusoidal waveforms
-10 models: 100ms
-42L models: 300ms
600ms
ACT005, ACT050, ACT200:
Fixed core: 0.75 in [19mm] dia.
Split core: 0.85 in [21.6 mm] sq.
ACT750, ACT2000:
3.0 in [76.2 mm] dia.
ACTR005, ACTR050, ACTR200:
Fixed core: 0.75 in [19mm] dia.
Split core: 0.85 in [21.6 mm] sq.
ACTR750, ACTR2000:
Fixed core: 3.0 in [76.2 mm] dia.
ACTR500, ACTR1000, ACTR2000:
Split (flexible split core) core, 4.5 in [114.3mm] dia.
Book 2 (14.1)
CT-2
Current Sensors
1-800-633-0405
Prices as of October 22, 2014. Check Web site for most current prices.
AC Current Switches,
Transducers and Indicator
Company
Information
Drives
Soft Starters
Motors
AcuAMP AC Current Switch Specifications by Model Type
Specifications
Model
AC Current Switches
ACSN100
Input Range 0 to 100A
Setpoint Non-adjustable:
(Trip Point) 0.5 A
ACSN250
0 to 250A
Non-adjustable:
Fixed core: 0.75A
Split core: 1.25A
Isolated solid state:
Normally Open
Normally Open
0.15 A @ 120VAC
0.15 A @ 240VAC
or VDC
or VDC
Frequency
Range
50 to 400 Hz
Response
Time
N/A
Fixed core: 1 to 150A
Split core: 1.75 to 150A
Adjustable:
Fixed core: 1-150 A
(15-turn potentiometer)
Split core: 1.75-150 A
(4-turn potentiometer)
Monitored load current
required to adjust
setpoint
Isolated solid state:
Isolated solid state:
Output
ACS150
Normally Open
0.15 A @ 240VAC or
VDC
ACSL
0 to 150A
Adjustable
(3/4-turn potentiometer):
ACSL010: 1-10A
ACSL020: 2-20A
ACSL050: 10-50A
ACSL100: 50-100A
ACSL150: 100-150A
Monitored load current not
required to adjust
setpoint
Indicator
ACS200
Normally Open
AC: 0.15 mA @ 240VAC;
Normally Open
Normally Closed
AC: 0.2 mA @ 135VAC
0.2 A @ 135VAC or VDC
ACL1
Motion: Servos
and Steppers
Jumper Selectable:
Jumper Selectable:
Fixed core: 1 to 6A
6 to 40A
40 to 175A
Split core: 1.75 to 6A
6 to 40A
40 to 200A
Fixed core: 1.5 to 12A
12 to 55A
55 to 175A
Split core: 2 to 12A
12 to 55A
55 to 200A
Adjustable:
(4-turn potentiometer)
Fixed core: 1-175A
Split core: 1.75-200A
Monitored load current
required to adjust
setpoint
Adjustable:
Fixed core: 1.5-175A
(15-turn potentiometer)
Non-adjustable:
Split core: 2-200A
(4-turn potentiometer) 0.5 A
Monitored load current
required to adjust
setpoint
Isolated solid state:
Isolated solid state:
ACSX
Normally Open
or Normally Closed
AC model:
1A @ 240VAC
Normally Open
or Normally Closed
DC model:
0.15 A @ 30VDC
Motor Controls
0 to 100A
6 to 100 Hz
50 to 100 Hz
120ms
120ms
100ms & 2s inrush delay
40 to 120 ms
Field adjustable time
delay:
0.12 to 15 seconds
Fixed core:
0.75 in
[19mm] dia.
Fixed core:
0.75 in
[19mm] dia.
Fixed core:
0.55 in
[13.97 mm] dia.
Fixed core:
0.55 in
[13.97 mm] dia.
Fixed core:
0.75 in
[19mm] dia.
Split core:
0.85 in
[21.7 mm] sq.
Split core:
0.85 in
[21.7 mm] sq.
Split core:
0.85 in
[21.7 mm] sq.
Split core:
0.85 in
[21.7 mm] sq.
Split core:
0.85 in
[21.7 mm] sq.
Sensors:
Encoders
Sensors:
Current
Sensors:
Temperature
Normally Open
AC/DC model:
0.15 A @ 240 VAC/VDC
Normally Closed
AC/DC model:
0.2 A @ 135 VAC/VDC
10 to 100 Hz
Sensors:
Limit Switches
Sensors:
Pressure
Normally Open
or Normally Closed
AC model:
1A @ 240VAC
6 to 100 Hz
Sensors:
Proximity
Sensors:
Photoelectric
Isolated solid state:
6 to 100 Hz
Power
Transmission
LED Only
(flashing, red)
Sensors:
Level
Sensors:
Flow Switches
Pushbuttons
and Lights
50 to 400 Hz
N/A
Stacklights
Signali
Devices
Process
Sensing
Aperture
0 .30 in
[8.13 mm] dia.
0.30 in
[8.13 mm] dia.
Relays and
Timers
Pneumatics:
Air Prep
Pneumatics:
Directional Control
Valves
Pneumatics:
Cylinders
Pneumatics:
Tubing
Pneumatics:
Air Fittings
Appendix
Book 2
Terms and
Conditions
Book 2 (14.1)
www.automationdirect.com/current-sensors
Current Sensors
CT-3
Prices as of October 22, 2014. Check Web site for most current prices.
AC Current Sensors, Switches
and Transducers Application Guide
Application Guide
AcuAMP current sensors are a great fit
for processes ranging from monitoring
loads to preventive maintenance.
Models with the ability to read True RMS
non-sinusoidal waveforms make it easy
to monitor applications using variable
frequency drives.
for many applications including material
handling, fan and pump applications,
and heating systems. With current transducers, current switches and current
indicators, this sensor family gives you
valuable data
Use the application examples to help
choose the best sensor model for your
application.
Heater Life Prediction
Pump Jam & Suction Loss Protection
Current I
Current Switch
or Transducer
Digital
Input
Motor
Control
Signal
ACS Series
Current
Operated
Switch
Motor
Starter
Crusher/Grinder/Shredder Motor Interlocks
Pump Load Monitoring
4-20mA Input
to Controller
True
RMS
Transducer
Variable
Frequency
Drive
The performance of size reduction equipment like crushers or
grinders can be optimized by controlling the in-feed in order to
• Help prevent jamming
• Improve the uniformity of the resultant product
• Enhance overall production efficiency
PLC
Inputs
PLC
Outputs
Motor
Starters
Use: ACTR Series - True RMS Current
Current Switch
or Transducer
Lamp Failure Detection
Electric Motor Load Status
ACS Series Current
Operated Switch
L1
Inactive
Relay
Contact
L2
When L1 fails, the current drops. The Current Operated
Switch detects the drop in current and activates the relay
which turns on the back-up lamp L2. The system may be
configured fail-safe by using a Normally Open Current
switch together with Normally Closed relay contacts
Book 2 (14.1)
CT-4
Current Sensors
1-800-633-0405
Prices as of October 22, 2014. Check Web site for most current prices.
ACTR Series AC Current Transducers
Company
Information
Drives
Soft Starters
Features
Why use ACTR transducers?
The current waveform of a typical linear
load is a pure sine wave. However, in
VFD and SCR applications the output
waveforms are rough approximations
of a sine wave and are non-sinusoidal.
Each cycle will contain numerous spikes
and dips.
The ACTR transducers use a
mathematical algorithm called “True
RMS,” which integrates the actual
waveform over time. The output is the
amperage component of the true power
(heating value) of the AC current
waveform. True RMS is the only way to
accurately measure distorted AC
waveforms. Select ACTR transducers for
non-linear loads or in “noisy” power
environments.
• Five-year warranty
• 4-20 mA output only
• True RMS technology is accurate on
distorted waveforms such as VFD or SCR
outputs.
• Choice of jumper-selectable ranges
reduces inventory and eliminates zero
and span pots.
• Output is magnetically isolated from the
input for safety and eliminates voltage
drop.
• Built-in feet with optional 35mm DIN rail
adapter available.
Applications
VFD Controlled Loads
• VFD output indicates how the motor and
attached load are operating.
Agency Approvals
SCR Controlled Loads
Motion: Servos
and Steppers
Motor Controls
Sensors:
Proximity
Sensors:
Photoelectric
Sensors:
Limit Switches
Sensors:
Current
Switching Power Supplies and
Electronic Ballasts
Sensors:
Pressure
Sensors:
Temperature
• True RMS sensing is the most accurate
way to measure power supply or ballast
input power.
Sensors:
Level
Sensors:
Flow Switches
Pcs/ Wt (lb) Price
Pkg
Part Number
Description
ACTR005-42L-F
AC current transducer with true RMS, 4-20 mA
output, fixed core
1
0.30
$136.00
ACTR005-42L-S
AC current transducer with true RMS, 4-20 mA
output, split core
1
0.36
$155.00
ACTR050-42L-F
AC current transducer with true RMS, 4-20 mA
output, fixed core
1
0.30
$126.00
ACTR050-42L-S
AC current transducer with true RMS, 4-20 mA
output, split core
1
0.36
$157.00
ACTR200-42L-F
AC current transducer with true RMS, 4-20 mA
output, fixed core
1
0.30
$128.00
ACTR200-42L-S
AC current transducer with true RMS, 4-20 mA
output, split core
1
0.36
$160.00
ACTR500-42L-S
AC current transducer with true RMS, 4-20 mA
output, flexible split core
1
0.60
$295.00
ACTR750-42L-F
AC current transducer with true RMS, 4-20 mA
output, fixed core
1
ACTR1000-42L-S
AC current transducer with true RMS, 4-20 mA
output, flexible split core
1
0.60
$320.00
current transducer with true RMS, 4-20 mA
ACTR2000-42L-F AC
output, fixed core
1
2.00
$267.00
current transducer with true RMS, 4-20 mA
ACTR2000-42L-S AC
output, flexible split core
1
0.60
$320.00
Model
ACTR005, -F/-S
ACTR200, -F/-S
2.00
$207.00
ACTR500, -S
ACTR750, -F
ACTR1000, -S
ACTR2000, -F
ACTR2000, -S
2
0.40
Pushbuttons
and Lights
Maximum Input Ranges
ACTR050, -F/-S
Accessories
DIN rail adapters, 1.69”x0.39”x0.75” [43x10x19 mm]
Power
Transmission
Sensors:
Encoders
• Accurate measurement of phase angle
fired SCRs. Current measurement gives
faster response than temperature measurement.
ACTR Series AC Current Transducers
DRA-2
Motors
Range
Maximum Input Amps
Continuous 6 Sec 1 Sec
0 to 2A
80
125
250
0 to 5A
100
125
250
0 to 10A
80
125
250
0 to 20A
110
150
300
0 to 50A
175
215
400
0 to 100A
200
300
600
0 to 150A
300
450
800
0 to 200A
400
500
1000
0 to 500A
4000
4400
5000
0 to 375A
750
0 to 500A
750
1500
3750
0 to 750A
750
0 to 1000A
4000
4400
5000
0 to 1000A
2000
0 to 1333A
2000
4000
10 k
0 to 2000A
2000
0 to 2000A
4000
4400
5000
$3.50
Book 2 (14.1)
www.automationdirect.com/current-sensors
Current Sensors
CT-7
Stacklights
Signali
Devices
Process
Relays and
Timers
Pneumatics:
Air Prep
Pneumatics:
Directional Control
Valves
Pneumatics:
Cylinders
Pneumatics:
Tubing
Pneumatics:
Air Fittings
Appendix
Book 2
Terms and
Conditions
Prices as of October 22, 2014. Check Web site for most current prices.
ACTR Series AC Current Transducers
ACTR Series Specifications
Specifications
Power Supply
42L Models up to 200 Amp
42L-F Models 750 & 2000 Amp
24VDC nominal, (12 to 40 VDC) loop powered
(sinking)
24VDC nominal, (40VDC max), loop powered
(sinking)
42L-S Models 500, 1000 & 2000 Amp
24VDC Nominal, 22-36 Volts
Use Class 2 power supply or limitied power supply only
Output Signal
Output Limit
Loading
Accuracy
Response Time
Input Ranges
Field selectable from 0 to 200A
Field selectable from 375 to 2000A
Fixed: 500, 1000 or 2000A
Sensing Aperture
Fixed core: 0.74” [19mm] dia.
Split core: 0.85” [21.6 mm] sq.
Fixed core: 3.0” [76.2 mm] dia.
4.5 in [114.3 mm] dia.
UL listed to 600V
UL listed to 3,500VAC
4 -20 mA, loop powered (sinking), true RMS
112% of standard output range maximum valve
600Ω @ 24VDC
500Ω maximum
1.0% FS (10-100% of range)
600ms
listed to 1,270VAC, Tested to 5,000VAC
Isolation Voltage UL
(1 min. max)
Frequency Range
Case
10 to 400 Hz
40 to 400 Hz
UL 94 V-0 flammability rating
Operating Temperature: -4 to 122°F [-20 to 50°C]
Environmental
Relative Humidity: 0-95% RH, Non-condensing
Pollution Degree 2
Altitude to 2000 meters
Agency
Approvals*
UL/cUL (E222847), CE
UL/cUL (E197592), CE
* To obtain the most current agency approval information, see the Agency Approval Checklist section on the specific part number’s web page at www.AutomationDirect.com
Dimensions
Inches [mm]
ACTR Series, Up to 200 Amp Fixed Core
ACTR Series Up to 200 Amp Split Core
ACTR Series, 750 & 2000 Amp Fixed Core Large Aperture
See our website www.AutomationDirect.com
for complete Engineering drawings.
ACTR Series 500, 1000 & 2000 Amp Base & Flexible Split Core Loops
Book 2 (14.1)
CT-8
Current Sensors
1-800-633-0405
61.0mm
Ø 0.74 "
19mm
0.45"
11.4mm
ACTR Series AC Current Transducers
2.18 "
55.4mm
0.85"
21.6mm
3.50 "
88.9mm
-F Style
Connections
ACTR Series, Up to 200 Amp
Connections +
Load
4-20mA
Option
4–20mA
Option
Range
Range Jumper
Jumper
– 1(–) +
Output 2(+)
Loop Power (VDC)
Power Supply
27
22
0.85"
21.6mm
Load
Load
– (+) (Controller,
+ (–) Meter, etc.)
Notes:
Notes:
■ Captive screw terminals.
Deadfront
captive
screw
■ Use 14-22
AWG solid
or stranded.
terminals
(–F
case)
■ Observe
polarity.
12–22 AWG solid or stranded
Observe polarity
Low Mid High
Range Switch
–
+
Output
-S Style
24 VDC Power
+ –
Notes: ■ Captive screw terminals.
■ Use 12-22 AWG solid or stranded.
■ Observe polarity.
Power
Transmission
Motor Controls
Sensors:
Proximity
Sensors:
Limit Switches
Application Examples
Operating Range
Sensors:
Encoders
12
250
750
500
Total Loop Impedance (Ohms)
Motors
Sensors:
Photoelectric
VL = 12VDC + (RL× 0.020A)
where VL = Minimum Loop Supply
RL = Total Loop Resistance (Ohms)
0
Soft Starters
Motion: Servos
and Steppers
–
+
(4–20 mA output only)
17
Company
Information
Drives
2.25"
57.2mm
Connections
ACTR Series, 750 & 2000 Amp
24 VDC Power
24 VDC Power
–
(–) (+)
Output
32
2.40"
31mm 22, 2014. Check Web site for most current prices.
Prices as of October
1000
Sensors:
Current
Sensors:
Pressure
Connections
ACTR Series, Flexible Split Core
500, 1000 & 2000 Amp
Sensors:
Temperature
Sensors:
Level
Sensors:
Flow Switches
Pushbuttons
and Lights
Stacklights
Signali
Devices
Notes:
Fingersafe captive screw terminals.
14–22 AWG solid or stranded.
Observe polarity.
Process
Relays and
Timers
Pneumatics:
Air Prep
Output
-
Pneumatics:
Directional Control
Valves
+
(+)
(+) (–)
24 VDC Power
(Controller
(–)Meter, etc.),
Pneumatics:
Cylinders
Load
500Ω max load
Pneumatics:
Tubing
Pneumatics:
Air Fittings
Appendix
Book 2
Terms and
Conditions
Book 2 (14.1)
www.automationdirect.com/current-sensors
Current Sensors
CT-9
1/--pages
Report inappropriate content