close

Вход

Log in using OpenID

embedDownload
GENERAL INFORMATION
SEALEXCEL Bite-LokÒ Flareless Bite Type Tube Fittings are designed according to DIN 2353 and manufactured
under rigid quality control procedure approved to ISO 9001:2008 and tested according to extensive testing
procedure BS4368 part IV which ensures leak free connection of tubes and components in fluid systems.
SEALEXCEL manufacture the Bite-LokÒ Tube Fittings in accordance with the following standard
Ò
Bite-Lok TUBE FITTINGS
: DIN 2353
TUBE CONNECTION SIDE
:DIN 3861 and ISO 8434
MALE STUD AND PORT TAPPING FOR
METRIC AND BSP THREADS
NPT THREAD
UN/UNF THREAD
METRIC THREAD WITH O-RING SEAL
SWIVEL NUTS AND WELD FITTINGS
TECHNICAL TERMS FOR TUBE FITTINGS
:DIN 3852 part 1 and 2
: ANSI / ASME B1.20.1
: SAE J514
: ISO 6149 and DIN 3852 part 3
: DIN 3865
: DIN 3859
MATERIAL :
Ò
SEALEXCEL Bite-Lok Tube Fittings are available as standard in material stainless steel.
HEAT TRACEABILITY:
SEALEXCEL Bite-LokÒ stainless steel Tube Fittings are heat code traceable back to the original mill heat from
which it was made.
PRESSURE RATING:
SEALEXCEL Bite-LokÒ Tube Fittings are suitable for use at the following nominal pressure.
SERIES
TUBE OD
NOMINAL
PRESSURE
L (Light)
6-15mm
250 bar
18-22mm
160 bar
28-42mm
100 bar
S (heavy)
6-14mm
630 bar
16-25mm
400 bar
30-38mm
250 bar
Notes : Since many factor influence the pressure at which a system will or will not perform satisfactorily.
Detail as shown above are only for guidance and not rigid.
TEMPERATURE RATING :
STAINLESS STEEL
CAUTION
: up to 400OC
: For higher temperatures, reduction in pressures should be taken in to account
FOR SEAL MATERIAL :
BUNA-N
FPM (VITON)Ò
: -35OC to 100OC
: -25OC to 200OC
3
FUNCTION OF BITE RING FITTINGS
Body
Bite Ring
ABC
E
Nut
D
Before Assembly
After Assembly
E : After assembly, a visible collar fills space in front of first biting edge.
DESIGN :
SEALEXCEL has designed the Bite Ring very carefully with proper consideration having twin Biting edges to have
firm and safe gripping on tubing to provide leak free connection of tube and components in fluid systems.
The important function of the Bite Ring is to have controlled progressive bite of the ring into the tube due to a unique
internal geometry of the Bite Ring.
FUNCTION :
As the Bite-LokÒ Tube Fittings Nut tightened, the Bite Ring moves towards the surface of the tube and the front
Biting edge 'A' of the Bite Ring starts Biting tube, at the point where second Biting edge 'B' of the Bite Ring comes in
contact with the surface of the tube a sharp increase in torque will occur, as soon as the both Biting edges have Bite
the tube to the designed depth, the third stop edge 'C' of the Bite Ring comes in contact with the surface of the tube,
a considerable increase in tightening torque which is already perceptible, at the same time, the Bite Ring is gripped
firmly on tube providing perfect sealing.
Due to the design of twin biting and stop edges of the Bite Ring, the arising force are properly distributed. This
distribution with inner edge 'D' of the Bite Ring increase the safety with regard to flexure stresses. Thus the vibration
is eliminated form the biting area.
This ensures
4
·
·
·
·
·
High degree of sealing efficiency
Reliable for high pressure applications
Vibration resistance
High Fatigue strength
Operational safety.
TUBING SELECTION
We recommend stainless steel cold drawn fully annealed seamless tubing to DIN 17458 or equivalent and provide
tolerances to DIN 2391 part 1
The following tube wall thickness are recommended with stainless steel Bite-LokÒ Tube Fittings
TUBE
O. D. Tolerance
mm
mm
6
6
6
6
8
8
8
8
10
10
10
10
10
12
12
12
12
12
12
15
15
15
15
16
16
16
18
18
18
18
+0.1
+0.1
+0.1
+0.08
+0.08
+0.08
+0.08
Wall
thickness
Weight
mm
kg/m
1
1.5
2
2.25
1
1.5
2
2.5
1
1.5
2
2.5
3
1
1.5
2
2.5
3
3.5
1.5
2
2.5
3
2
2.5
3
1.5
2
2.5
3
0.125
0.168
0.200
0.211
0.175
0.244
0.300
0.344
0.225
0.319
0.401
0.469
0.525
0.275
0.394
0.501
0.594
0.615
0.744
0.507
0.651
0.782
0.901
0.701
0.845
0.977
0.620
0.801
0.967
1.126
Calculated pressure
DIN 2413
I
III
bar
bar
372
526
662
725
347
412
526
630
294
357
458
551
638
245
368
391
474
551
624
294
321
391
458
368
370
433
245
327
333
391
357
505
636
696
277
396
505
604
238
343
439
529
612
201
291
376
455
529
599
238
309
376
439
291
355
416
201
262
320
376
TUBE
O. D.
mm
20
20
20
20
22
22
22
25
25
25
25
25
25
28
28
28
28
28
30
30
30
35
35
35
35
35
35
38
38
38
38
42
42
Wall
Tolerance thickness
mm
+0.08
+0.08
+0.08
+0.08
+0.08
+0.15
+0.15
+0.2
mm
2.5
3
3.5
4
2
2.5
3
2
2.5
3
4
4.5
5
2
2.5
3
4
5
3
4
5
2
2.5
3
4
5
6
4
5
6
7
3
4
Weight
kg/m
1.095
1.277
1.443
1.600
1.002
1.220
1.426
1.152
1.408
1.635
2.092
2.307
2.501
1.302
1.594
1.874
2.402
2.876
2.028
2.605
3.400
1.644
2.018
2.392
3.086
3.742
4.351
3.405
4.131
4.807
5.426
2.930
3.798
Calculated pressure
DIN 2413
I
III
bar
bar
368
291
357
343
408
392
458
439
267
218
334
267
328
315
235
193
294
238
353
281
378
363
418
402
458
439
210
174
263
214
315
253
342
328
415
399
294
238
321
309
391
376
168
141
210
174
252
206
336
269
342
328
401
385
309
249
318
305
373
358
427
410
210
174
280
227
Note : Parallel sleeves are recommended where thin walled tube are subject to serve strains.
Calculated pressures to DIN 2413, scope of application I,
O
for primarily static load conditions at temperatures up to 120 C.
2
YIELD POINT/RP1.0
:225N/mm (to DIN 17458)
DESIGN FACTOR
:1.5
ALLOWANCE FACTOR C1 :10% of wall thickness
ALLOWANCE FACTOR C2 :0 (no allowance for corrosion)
For a diameter ratio of u = OD/ID>1.35,
calculation made to DIN 2413/III and based on a pulsating
2
fatigue limit of 225 N/mm .
Calculated pressures to DIN 2413, scope of application III,
for pulsating load conditions at temperatures up to 120OC.
2
PULSATING FATIGUE LIMIT :216 N/mm (assumed value)
ALLOWANCE FACTOR C1 :10% of wall thickness
5
STUDS AND PORT FORMS
METRIC ISO THREAD : DIN 3852, Part 1
BSP THREAD
: DIN 3852, Part 2
Male Stud form B
Male Stud form E
Male Stud form C
sealing by cutting face
Sealing with ED seal
Sealing by taper thread
Metric/BSP
D1
Metric/BSP
D5
Taper
Thread
H
Taper Thread
B4
B1
B2
B3
Metric/BSP
Port tapping form X
(For parallel Male threads)
Port tapping form Z (for taper threads)
PARALLEL
THREAD
METRIC
M 10 x 1
M 12 x 1.5
M 14 x 1.5
M 16 x 1.5
M 18 x 1.5
M 20 x 1.5
M 22 x 1.5
M 26 x 1.5
M 27 x 2
M 33 x 2
M 42 x 2
M 48 x 2
PARALLEL
THREAD
BSP
G 1/8
G 1/4
G 3/8
G 1/2
G 3/4
G 1
G 1-1/4
G 1-1/2
TAPER THREAD METRIC
D1
14
17
19
21
23
25
27
31
32
39
49
55
D1
14
18
22
26
32
39
49
55
+0.4
D4
15
18
20
22
24
26
28
32
33
40
50
56
+0.4
D4
15
19
23
27
33
40
50
56
D5
H max
B1 min
B2 min
W
14
17
19
21.9
23.9
25.9
27
31.9
32
39.9
49.9
55
1
1.5
1.5
1.5
2
2
2.5
2.5
2.5
2.5
2.5
2.5
8
12
12
12
12
14
14
16
16
18
20
22
13.5
18.5
18.5
18.5
18.5
20.5
20.5
22.5
24
26
28
30
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.2
0.2
0.2
0.2
0.2
D5
H max
B1 min
B2 min
W
14
18.9
22
26.9
32
39.9
49.9
55
1
1.5
2
2.5
2.5
2.5
2.5
2.5
8
12
12
14
16
18
20
22
13
18.5
18.5
22
24
27
29
31
0.1
0.1
0.1
0.1
0.2
0.2
0.2
0.2
For female threads, A does not apply
6
TAPER
THREAD
METRIC
10 x 1
12 x 1.5
14 x 1.5
16 x 1.5
18 x 1.5
20 x 1.5
22 x 1.5
B3 min
B4 min
5.5
8.5
8.5
8.5
8.5
10.5
10.5
10
13.5
13.5
13.5
13.5
15.5
15.5
TAPER THREAD BSPT
TAPER
THREAD
BSPT
R 1/8
R 1/4
R 3/8
R 1/2
B3 min
B4 min
5.5
8.5
8.5
10.5
9.5
13.5
13.5
16.5
For Effective Sealing of all taper pipe threads,
we recommend to use PTFE tape.
Instructions : Clean both male and female
taper threads. Two wraps of PTFE tape are
suggested in the direction of male tapered
thread spiral for proper make up.
STUDS AND PORT FORMS
METRIC ISO THREAD : DIN 3852, Part 3, ISO 6149
UNF / UN THREAD : SAE J 514,
NPT THREAD
: ANSI/ASME B1.20.1
Male Stud
NPT thread
ANSI/ASME B1.20.1
Male Stud form F with O-Ring
(DIN 3852, part 3)
Male Stud UN / UNF-2A
with O-Ring
(SAE J 514)
Metric
UN/UNF
D1
NPT
D2
D4
R0.3
R0.1
D5
NPT
Port tapping form W
(DIN 3852, Part 3/ ISO 6149)
Port tapping UN/UNF - 2B
For O-Ring sealing (SAE J 514)
PARALLEL
THREAD
METRIC
M 10 x 1
M 12 x 1.5
M 14 x 1.5
M 16 x 1.5
M 18 x 1.5
M 20 x 1.5
M 22 x 1.5
M 26 x 1.5
M 27 x 2
M 33 x 2
M 42 x 2
M 48 x 2
D1
12.9
16.9
18.9
20.9
22.9
24.9
26.9
30.9
31.9
37.9
47.9
54.9
B4
Port form NPT
ANSI/ASME B1.20.1
D2 min.
D4
D5 +0.1
A max
B1 min
B2 min
B5
20
22
25
27
29
32
34
37
40
46
56
64
13
16
18
20
22
24
26
31
32
38
47
53
11.1
13.8
15.8
17.8
19.8
21.8
23.8
29.05
29.4
35.4
44.4
50.4
1
1.5
1.5
1.5
2
2
2
2
2
2.5
2.5
2.5
10
11.5
11.5
13
14.5
14
15.5
16
19
19
19.5
22
11.5
14
14
15.5
16.5
16.5
18
18.5
22
22
2.5
25
1.6
2.4
2.4
2.4
2.4
2.4
2.4
3.1
3.1
3.1
3.1
3.1
PARALLEL
THREAD
D1
D2 min.
UN/UNF
7/16-20 UNF 14.4 21
9/16-18 UNF 17.6 25
3/4-16 UNF
22.3 30
7/8-14 UNF
25.5 34
1-1/16-12 UN 31.9 41
1-5/16-12 UN 38.2 49
1-5/8-12 UN 47.7 58
B3
B2
B1
B5
Metric
UN/UNF
D4
D5 +0.1
A max
B1 min
B2 min
B5
15
18
23
23
32
39
48
12.4
15.6
20.6
23.9
29.2
35.5
43.5
1.6
1.6
2.4
2.4
2.4
3.2
3.2
11.5
12.7
14.3
16.7
19
19
19
14
15.5
17.5
20
23
23
23
2.4
2.5
2.5
2.5
3.3
3.3
3.3
O
+
-1
O
12
15O
15O
15O
15O
15O
15O
15O
15O
15O
15O
15O
O
+
-1
O
12
12O
15O
15O
15O
15O
15O
TAPER
THREAD
METRIC
1/8-27 NPT
1/4-18 NPT
3/8-18 NPT
1/2-14 NPT
3/4-14 NPT
1-11.5 NPT
1-1/4-11.5 NPT
1-1/2-11.5 NPT
B3 min
B4 min
6.9
10
10.3
13.6
14.1
16.8
17.3
17.3
11.6
16.4
17.4
22.6
23.1
27.8
28.3
28.3
For Effective Sealing of all taper pipe threads,
we recommend to use PTFE tape.
Instructions : Clean both male and female
taper threads. Two wraps of PTFE tape are
suggested in the direction of male tapered
thread spiral for proper make up.
Tolerance for Male Stud thread : Class 2A
Tolerance for Female thread : Class 2B
7
TIGHTENING TORQUES FOR STUDS
METRIC ISO THREAD : DIN 3852, Part 1
BSP THREAD
: DIN 3852, Part 2
Male Stud form E
sealing with ED Seal
BSP
Metric
BSP
Metric
Blanking Plug - VSTI
BSP
Metric
Male Stud form B
sealing by cutting face
MALE STUD
THREAD BSP
RTT
in
(Nm)
G 1/8
G 1/4
G 3/8
G 1/2
G 3/4
G1
G 1-1/4
G 1-1/2
25
40
95
130
250
400
600
800
MALE STUD
THREAD METRIC
RTT
in
(Nm)
M 10 x 1
M 12 x 1.5
M 14 x 1.5
M 16 x 1.5
M 18 x 1.5
M 20 x 1.5
M 22 x 1.5
M 26 x 1.5
M 27 x 2
M 33 x 2
M 42 x 2
M 48 x 2
25
30
50
60
60
140
140
220
250
400
600
800
MALE STUD
THREAD BSP
G 1/8
G 1/4
G 3/8
G 1/2
G 3/4
G1
G 1-1/4
G 1-1/2
G 1-1/4
G 1-1/2
MALE STUD
THREAD METRIC
Note : Lubricate stud before screwing in
The above tightening torque mentioned above are for reference only.
8
M 10 x 1
M 12 x 1.5
M 14 x 1.5
M 16 x 1.5
M 18 x 1.5
M 20 x 1.5
M 22 x 1.5
M 26 x 1.5
M 27 x 2
M 33 x 2
M 42 x 2
M 48 x 2
M 42 x 2
M 48 x 2
MAX.
PRESSURE
PN 400
PN 250
PN 400
MAX.
PRESSURE
PN 400
PN 250
PN 400
RTT
in
(Nm)
15
33
70
90
150
220
500
500
600
800
RTT
in
(Nm)
13
30
40
60
70
90
100
120
150
250
400
400
400
700
INSTALLATION INSTRUCTIONS
ASSEMBLY IN HARDENED PRE-ASSEMBLY BODY.
1)
2)
In order to ensure positive
assembly, SEALEXCEL recommend
pre-assembled the tube and fittings
in hardened pre-assembly Body.
4)
3)
Ensure that the end of Tube is cut square
within + 1/2O angle to the tube axis.
Remove the burs and sharp edges to
the maximum chamfer 0.2 mm x 45O at
both inside and outside edge of the tube.
5)
Insert the Nut and Bite Ring
over tube end.
7)
Loosen the Nut, remove the tube from
the pre-assembly body, check the
penetration of cutting edge. A visible
collar fills space in front of first cutting
edge completely. It does not matter even
Bite Ring rotate on tube end.
Lubricate the thread and cone of the
pre-assembly body, Bite Ring and
thread of the nut.
6)
Tighten the Nut with wrench 1 turn
from the finger tight position.
Screw on Nut manually on to
pre-assembly body until finger tight,
hold tube against the shoulder in the
cone of pre-assembly body
8)
9)
Final assembly in Fitting body
Put pre-installed tube in to the
fitting body.
Tighten the Nut with wrench by
approx 1/2 turns beyond point of
clearly perceptible resistance.
Repeated Assembly
Each time the fitting is disassembled,
the nut must be re-tightened firmly
using the same torque as required
for final assembly
9
INSTALLATION INSTRUCTIONS
ASSEMBLY IN FITTING BODY WITHOUT USING PRE-ASSEMBLY BODY.
1)
2)
Ensure that the end of Tube is cut square
within + 1/2O angle to the tube axis.
Remove the burs and sharp edges to
the maximum chamfer 0.2 mm x 45O at
both inside and outside edge of the tube.
3)
Lubricate the thread and cone of the
fitting body, Bite Ring and
thread of the nut.
4)
Insert the Nut and Bite Ring
over tube end.
6)
Screw on Nut manually on to
fitting body until finger tight,
hold tube against the shoulder in the
cone of pre-assembly body
7)
Loosen the Nut, remove the tube from
the fitting body, check the
penetration of cutting edge. A visible
collar fills space in front of first cutting
edge completely. It does not matter even
Bite Ring rotate on tube end.
10
Repeated Assembly
Each time the fitting is disassembled,
the nut must be re-tightened firmly
using the same torque as required
for final assembly
5)
Tighten the Nut with wrench 1-1/2 turn
from the finger tight position.
8)
Final assembly of Taper fittings
After applying oil on O-Ring, tighten
the Nut 1/3 of a turn beyond the
point of noticeable resistance
INSTALLATION INSTRUCTIONS
ASSEMBLY OF SUPPORT SLEEVES
1)
2)
Ensure that the end of Tube is cut square
within + 1/2O angle to the tube axis.
Remove the burs and sharp edges to
the maximum chamfer 0.2 mm x 45O at
both inside and outside edge of the tube.
4)
3)
Support Sleeve
5)
Drive knurl edge into tube
(use soft hammer)
Insert support sleeve up to knurl.
6)
Ensure support sleeve is flush
with tube end.
No tube necking after assembly
with support sleeve.
For further assembly
please refer
Page No. 9 & 10
11
INDEX
Straight Fittings
Equal Elbow Fittings
Equal Tee Fittings
Equal Cross Fittings
Tube to Tube..............................15
Tube to Tube..............................16
Tube to Tube..............................17
Tube to Tube..............................18
Straight Reducer Fittings
Tee Reducer Fittings
Straight Bulkhead Fittings
Bulkhead Elbow Fittings
Tube to Tube......................19
Tube to Tube Series L...........20
Tube to Tube Series S...........21
Tube to Tube......................22
Tube to Tube......................23
Weld Bulkhead Fittings
Tube to Tube......................24
Straight Male Stud Fittings Straight Male Stud Fittings Straight Male Stud Fittings
(Cutting face to DIN 3852 form B)
(Sealing with ED Seal)
(Sealing with O-Ring)
Tube to BSP Parallel Thread...25,26
Tube to Metric Parallel Thread.... 27
Tube to BSP Parallel Thread.....28
Tube to Metric Parallel Thread... 29
Tube to Metric Parallel Thread...30
Tube to UN/UNF Thread....... 31
Straight Male Stud Fittings Straight Male Stud Fittings Male Stud Elbow Fittings
Male Stud Elbow Fittings
(Sealing by Taper thread)
(Sealing by NPT thread)
(Sealing by Taper thread)
(Sealing by NPT thread)
Tube to BSP Taper Thread.....32
Tube to Metric TaperThread... 32
Tube to NPT Thread............33
Tube to BSP Taper Thread.....34
Tube to Metric Taper Thread... 34
Tube to NPT Thread............35
Straight Female Stud Fittings
Straight Female Stud Fittings
Pressure Gauge Fittings
Pressure Gauge Fittings
with Swivel Nut
(Sealing with DK Seal)
Tube to Female BSP Thread...38
(Sealing with DK Seal)
Tube to BSP Parallel Thread.....36
Tube to BSP Taper Thread... 36
Tube to Metric Parallel Thread...37
Reducing Tube Adaptor
with Swivel Nut
Reducing Standpipe
Fittings
Straight Stud Standpipes
(Sealing with ED Seal)
Straight Stud Adaptor
with Swivel Nut
Tube to Swivel Nut (Series L)....40
Tube to Swivel Nut (Series S)....41
Tube to Swivel (Series L).........42
Tube to Swivel (Series S).........43
Swivel to BSP Parallel Thread.....44
Swivel to Metric Parallel Thread..45
Swivel to BSP Parallel Thread.....46
Swivel to Metric Parallel Thread..47
12
Swivel to Female BSP Thread...39
(Sealing with ED Seal)
INDEX
Adjustable Elbow Fittings
Adjustable Elbow Fitting
(For Adaptions)
(Cutting face to DIN 3852 form B)
Tube to Swivel...........................48
Tube to BSP Parallel Thread.....49
Tube to Metric Parallel Thread...50
Adjustable Barrel
Tee Fittings
Adjustable Barrel
Tee Fittings
Adjustable Tee Fittings
Adjustable Tee Fittings
(Cutting face to DIN 3852 form B)
(For Adaptions)
Tube to Swivel...........................51
Tube to BSP Parallel Thread.....52
Tube to Metric Parallel Thread...53
Adjustable Elbow Fittings Adjustable Elbow Fittings
with Swivel Nut
with Swivel Nut
(For Adaptions)
(Cutting face to DIN 3852 form B)
(For Adaptions)
(Sealing with ED Seal)
Tube to Swivel...........................54
Tube to BSP Parallel Thread.....55
Tube to Metric Parallel Thread...56
Tube to Swivel...........................57
Tube to BSP Parallel Thread.....58
Tube to Metric Parallel Thread..59
Adjustable Tee Fittings
with Swivel Nut
Adjustable Branch Tee
Fittings with Swivel Nut
Adjustable Barrel Tee
Fittings with Swivel Nut
Adjustable Barrel Tee
Fittings with Swivel Nut
(For Adaptions)
(Sealing with ED Seal)
Tube to Swivel...........................60
Tube to BSP Parallel Thread.....61
Tube to Metric Parallel Thread..62
High Pressure Banjo Fittings High Pressure Banjo Fittings
(Sealing with Soft Seal KD)
(Sealing with Metal Seal Ring DKA)
Tube to BSP Parallel Thread.....66
Tube to Metric Parallel Thread..67
Tube to BSP Parallel Thread.....68
Tube to Metric Parallel Thread..69
Weld Fittings
(For Adaptions)
(Sealing with ED Seal)
Tube to Swivel...........................63
Tube to BSP Parallel Thread.....64
Tube to Metric Parallel Thread..65
High Pressure Banjo
Tee Fittings
High Pressure Banjo
Tee Fittings
(Sealing with Soft Seal KD)
(Sealing with Metal Seal Ring DKA)
Tube to BSP Parallel Thread.....70
Tube to Metric Parallel Thread..71
Tube to BSP Parallel Thread.....72
Tube to Metric Parallel Thread..73
Weld Nipples
Weld Nipples (Reducers)
Weld Fittings
Tube to Pipe Weld....................74
Port to Pipe Weld....................75
Port to Pipe Weld....................76
Pipe to Pipe Weld....................77
Blanking Ends
Nut
Bite Ring
Reducing Thread Adaptors
Tube Ends...............................78
Page.....................................79
Page.....................................79
(Cutting face to DIN 3852 form B)
Male and Female.
BSP Parallel Thread................80
13
INDEX
Reducing Thread Adaptors
Blanking Plugs
Blanking Plugs
(Sealing with ED Seal)
(Sealing with ED Seal)
(Sealing with O-Ring)
Blanking Plugs to
Fit Cones
(Sealing with O-Ring)
Male and Female.
BSP Parallel Thread................81
BSP Parallel Thread..................82
Metric Parallel Thread................82
Bulkhead Fittings Nut
Support Sleeves
Page........................................83
Page........................................83
Soft Sealing Rings
Metal Sealing Rings
(For Banjo Fittings WH/TH Series)
(For Banjo Fittings WH/TH Series)
Page........................................84
Page........................................85
Page........................................86
O-Rings
Metal Seal Ring
Soft Seals
(For Pressure Gauge Connectors)
(For Male Stud Ends)
Page........................................87
Page........................................87
14
Metric Parallel Thread................82
Page........................................88
STRAIGHT FITTINGS - G
S2
S1
T
L2
L1
SERIES
L -Light
PN 315
PN 160
S-Heavy
PN 630
PN 400
PN 315
TUBE
O. D.
T
L1
L2
S1
S2
6
8
10
12
15
18
22
28
35
42
6
8
10
12
14
16
20
25
30
38
39
40
42
43
46
48
52
54
63
66
45
47
49
51
57
57
66
74
80
90
10
11
13
14
16
16
20
21
20
21
16
18
17
19
22
21
23
26
27
29
12
14
17
19
24
27
32
41
46
55
14
17
19
22
24
27
32
41
46
55
14
17
19
22
27
32
36
41
50
60
17
19
22
24
27
30
36
46
50
60
Dimensions are in millimeters
Dimension L1 is approximate length with tightened nut.
The above part numbers are for complete fittings including Nut, Bite Ring and Body.
Only body without Nut and Bite Ring are available on request.
If you have requirements other than above size and Dimensions,
please contact us with complete details
Dimensions are for reference only and are subject to change without notice.
SEALEXCEL
PART NO.
APPROX. WT.
Kg per 10 pcs.
G-6L
G-8L
G-10L
G-12L
G-15L
G-18L
G-22L
G-28L
G-35L
G-42L
G-6S
G-8S
G-10S
G-12S
G-14S
G-16S
G-20S
G-25S
G-30S
G-38S
0.34
0.49
0.62
0.83
1.37
1.94
2.62
3.37
5.20
7.73
0.61
0.79
1.07
1.33
1.84
2.27
3.63
6.89
8.11
12.27
Suffixes the following material code along with above
part number while sending your enquiries / orders.
Material
Code
Example
SS316L
SS304
EL
I
G-6L/EL
G-6L/I
The material SS316Ti are available on request
15
EQUAL ELBOW FITTINGS - W
S3
S2
T
L2
L1
SERIES
L-Light
PN 315
PN 160
S-Heavy
PN 630
PN 400
PN 315
TUBE
O. D.
T
L1
L2
S2
S3
6
8
10
12
15
18
22
28
35
42
6
8
10
12
14
16
20
25
30
38
27
29
30
32
36
40
44
47
56
63
31
32
34
38
40
43
48
54
62
72
12
14
15
17
21
23.5
27.5
30.5
34.5
40.0
16
17
17.5
21.5
22.0
24.5
26.5
30.0
35.5
41.0
14
17
19
22
27
32
36
41
50
60
17
19
22
24
27
30
36
46
50
60
12
12
14
17
19
24
27
36
41
50
12
14
17
19
19
24
27
36
41
50
Dimensions are in millimeters
Dimension L1 is approximate length with tightened nut.
The above part numbers are for complete fittings including Nut, Bite Ring and Body.
Only body without Nut and Bite Ring are available on request.
If you have requirements other than above size and Dimensions,
please contact us with complete details
Dimensions are for reference only and are subject to change without notice.
SEALEXCEL
PART NO.
APPROX. WT.
Kg per 10 pcs.
W-6L
W-8L
W-10L
W-12L
W-15L
W-18L
W-22L
W-28L
W-35L
W-42L
W-6S
W-8S
W-10S
W-12S
W-14S
W-16S
W-20S
W-25S
W-30S
W-38S
0.51
0.75
0.98
1.34
1.62
2.36
3.26
4.57
7.07
10.86
0.87
1.16
1.60
2.10
2.03
2.70
4.15
7.96
10.28
15.47
Suffixes the following material code along with above
part number while sending your enquiries / orders.
Material
Code
SS316L
SS304
EL
I
Example
W-6L/EL
W-6L/I
The material SS316Ti are available on request
16
EQUAL TEE FITTINGS - T
S3
S2
T
L2
L1
SERIES
L-Light
PN 315
PN 160
S-Heavy
PN 630
PN 400
PN 315
TUBE
O. D.
T
L1
L2
S2
S3
6
8
10
12
15
18
22
28
35
42
6
8
10
12
14
16
20
25
30
38
27
29
30
32
36
40
44
47
56
63
31
32
34
38
40
43
48
54
62
72
12
14
15
17
21
23.5
27.5
30.5
34.5
40.0
16
17
17.5
21.5
22.0
24.5
26.5
30.0
35.5
41.0
14
17
19
22
27
32
36
41
50
60
17
19
22
24
27
30
36
46
50
60
12
12
14
17
19
24
27
36
41
50
12
14
17
19
19
24
27
36
41
50
Dimensions are in millimeters
Dimension L1 is approximate length with tightened nut.
The above part numbers are for complete fittings including Nut, Bite Ring and Body.
Only body without Nut and Bite Ring are available on request.
If you have requirements other than above size and Dimensions,
please contact us with complete details
Dimensions are for reference only and are subject to change without notice.
SEALEXCEL
PART NO.
APPROX. WT.
Kg per 10 pcs.
T-6L
T-8L
T-10L
T-12L
T-15L
T-18L
T-22L
T-28L
T-35L
T-42L
T-6S
T-8S
T-10S
T-12S
T-14S
T-16S
T-20S
T-25S
T-30S
T-38S
0.71
1.01
1.28
1.70
2.30
3.35
4.43
6.22
9.39
14.32
1.20
1.55
2.12
2.81
2.86
3.85
5.59
11.24
14.10
21.09
Suffixes the following material code along with above
part number while sending your enquiries / orders.
Material
Code
SS316L
SS304
EL
I
Example
T-6L/EL
T-6L/I
The material SS316Ti are available on request
17
EQUAL CROSS FITTINGS - K
S3
S2
T
L2
L1
SERIES
L-Light
PN 315
PN 160
S-Heavy
PN 630
PN 400
PN 315
TUBE
O. D.
T
L1
L2
S2
S3
6
8
10
12
15
18
22
28
35
42
6
8
10
12
14
16
20
25
30
38
27
29
30
32
36
40
44
47
56
63
31
32
34
38
40
43
48
54
62
72
12
14
15
17
21
23.5
27.5
30.5
34.5
40.0
16
17
17.5
21.5
22.0
24.5
26.5
30.0
35.5
41.0
14
17
19
22
27
32
36
41
50
60
17
19
22
24
27
30
36
46
50
60
12
12
14
17
19
24
27
36
41
50
12
14
17
19
19
24
27
36
41
50
Dimensions are in millimeters
Dimension L1 is approximate length with tightened nut.
The above part numbers are for complete fittings including Nut, Bite Ring and Body.
Only body without Nut and Bite Ring are available on request.
If you have requirements other than above size and Dimensions,
please contact us with complete details
Dimensions are for reference only and are subject to change without notice.
SEALEXCEL
PART NO.
APPROX. WT.
Kg per 10 pcs.
K-6L
K-8L
K-10L
K-12L
K-15L
K-18L
K-22L
K-28L
K-35L
K-42L
K-6S
K-8S
K-10S
K-12S
K-14S
K-16S
K-20S
K-25S
K-30S
K-38S
0.78
1.05
1.30
1.77
2.95
4.29
5.77
7.78
11.86
18.06
1.28
1.66
2.25
2.78
3.72
4.97
7.58
14.18
18.05
26.20
Suffixes the following material code along with above
part number while sending your enquiries / orders.
Material
Code
SS316L
SS304
EL
I
Example
K-6L/EL
K-6L/I
The material SS316Ti are available on request
18
STRAIGHT REDUCER FITTINGS - GR
TUBE CONNECTION : Both side according to DIN 2353
S2
S1
S3
T1
T2
L2
L1
TUBE
O. D.
SERIES
L-Light
PN 315
PN 160
S-Heavy
PN 630
PN 400
Dimensions are in millimeters
T1
T2
L1
L2
S1
S2
S3
8
10
10
12
12
12
15
15
18
18
18
22
22
22
28
28
35
35
8
10
10
12
12
12
14
14
16
16
20
20
20
25
25
30
30
38
6
6
8
6
8
10
10
12
10
12
15
12
15
18
18
22
22
28
6
6
8
6
8
10
10
12
12
14
10
12
16
16
20
20
25
30
40
41
41
42
42
43
45
45
46
46
48
48
50
50
52
54
59
59
47
48
48
50
50
51
54
54
54
57
60
60
63
68
71
74
77
87
11
12
12
13
13
14
15
15
15.5
15.5
16.5
17.5
18.5
18
19
21
21
21
18
17.5
17.5
19.5
19.5
19
20.5
20.5
20
21.5
22
22
23
25.5
25.5
26
26.5
29.5
14
17
17
19
19
19
24
24
27
27
27
32
32
32
41
41
46
46
17
19
19
22
22
22
24
24
27
27
32
32
32
41
41
46
46
55
17
19
19
22
22
22
27
27
32
32
32
36
36
36
41
41
50
50
19
22
22
24
24
24
27
27
30
30
36
36
36
46
46
50
50
60
14
14
17
14
17
19
19
22
19
22
27
22
27
32
32
36
36
41
17
17
19
17
19
22
22
24
24
27
22
24
30
30
36
36
46
50
Dimension L1 is approximate length with tightened nut.
The above part numbers are for complete fittings including Nut, Bite Ring and Body.
Only body without Nut and Bite Ring are available on request.
If you have requirements other than above size and Dimensions,
please contact us with complete details
Dimensions are for reference only and are subject to change without notice.
APPROX. WT.
Kg per 10 pcs.
SEALEXCEL
PART NO.
GR-8L-6L
GR-10L-6L
GR-10L-8L
GR-12L-6L
GR-12L-8L
GR-12L-10L
GR-15L-10L
GR-15L-12L
GR-18L-10L
GR-18L-12L
GR-18L-15L
GR-22L-12L
GR-22L-15L
GR-22L-18L
GR-28L-18L
GR-28L-22L
GR-35L-22L
GR-35L-28L
GR-8L-6S
GR-10S-6S
GR-10S-8S
GR-12S-6S
GR-12S-8S
GR-12S-10S
GR-14S-10S
GR-14S-12S
GR-16S-12S
GR-16S-14S
GR-20S-10S
GR-20S-12S
GR-20S-16S
GR-25S-16S
GR-25S-20S
GR-30S-20S
GR-30S-25S
GR-38S-30S
0.43
0.52
0.57
0.65
0.70
0.75
1.07
1.14
1.43
1.50
1.72
1.93
2.18
2.38
3.06
3.26
4.43
4.61
0.74
0.91
0.95
1.11
1.15
1.27
1.56
1.62
1.88
2.12
2.71
2.77
3.13
5.12
5.64
6.51
7.78
11.03
Suffixes the following material code along with above
part number while sending your enquiries / orders.
Material
Code
SS316L
SS304
EL
I
Example
GR-8L-6L/EL
GR-8L-6L/I
The material SS316Ti are available on request
19
TEE-REDUCER FITTINGS - TR
TUBE CONNECTION : All three sides according to DIN2353
S1
S4
S3
T1
L3
L6
T3
S2
T2
L4
L5
L1
SERIES
L-Light
PN 316
PN 315
PN 315
PN 315
PN 315
PN 160
PN 160
L2
Dimensions are in millimeters
TUBE O. D.
T1
T2
T3
L1
L2
L3
L4
L5
L6
S1
S2
S3
S4
6
8
6
8
10
10
10
8
12
12
12
12
12
12
10
12
15
15
15
15
15
12
18
18
18
18
18
22
22
22
22
22
22
22
28
28
28
28
28
28
8
6
10
10
6
8
10
12
6
8
8
10
10
12
15
15
6
10
12
12
15
18
10
10
12
15
18
10
12
15
15
18
18
22
10
12
15
18
22
22
6
8
6
8
10
10
6
8
12
8
12
10
12
10
10
12
15
15
12
15
12
12
10
18
18
18
10
22
22
15
22
18
22
18
28
28
28
28
22
28
29
29
30
30
30
30
30
32
32
32
32
32
32
32
36
36
36
36
36
36
36
39
40
40
40
40
40
44
44
44
44
44
44
44
47
47
47
47
47
47
29
29
30
30
30
30
30
32
32
32
32
32
32
32
36
36
36
36
36
36
36
39
39
40
40
40
39
44
44
43
44
44
44
44
47
47
47
47
47
47
29
29
30
30
30
30
30
32
32
32
32
32
32
32
36
36
36
36
36
36
36
40
39
39
39
39
40
43
43
43
43
44
44
44
46
46
46
47
47
47
14
14
15
15
15
15
15
17
17
17
17
17
17
17
21
21
21
21
21
21
21
24
23.5
23.5
23.5
23.5
23.5
27.5
27.5
27.5
27.5
27.5
27.5
27.5
30.5
30.5
30.5
30.5
30.5
30.5
14
14
15
15
15
15
15
17
17
17
17
17
17
17
21
21
21
21
21
21
21
24
24
23.5
23.5
23.5
24
27.5
27.5
28
27.5
27.5
27.5
27.5
30.5
30.5
30.5
30.5
30.5
30.5
14
14
15
15
15
15
15
17
17
17
17
17
17
17
21
21
21
21
21
21
21
23.5
24
24
24
24
23.5
28
28
28
28
27.5
27.5
27.5
31
31
31
30.5
30.5
30.5
14
17
14
17
19
19
19
17
22
22
22
22
22
22
19
22
27
27
27
27
27
22
32
32
32
32
32
36
36
36
36
36
36
36
41
41
41
41
41
41
17
14
19
19
14
17
19
22
14
17
17
19
19
22
27
27
14
19
22
22
27
32
19
19
22
27
32
19
22
27
27
32
32
36
19
22
27
32
36
36
14
17
14
17
19
19
14
17
22
17
22
19
22
19
19
22
27
27
22
27
22
22
19
32
32
32
19
36
36
27
36
32
36
32
41
41
41
41
36
41
14
14
14
14
14
14
14
17
17
17
17
17
17
17
19
19
19
19
19
19
19
24
24
24
24
24
24
27
27
27
27
27
27
27
36
36
36
36
36
36
Dimension L1, L2 & L3 are approximate length with tightened nut.
The above part numbers are for complete fittings including Nut, Bite Ring and Body.
Only body without Nut and Bite Ring are available on request.
If you have requirements other than above size and Dimensions,
please contact us with complete details
Dimensions are for reference only and are subject to change without notice.
SEALEXCEL
PART NO.
APPROX. WT.
Kg per 10 pcs.
TR-6L-8L-6L
TR-8L-6L-8L
TR-6L-10L-6L
TR-8L-10L-8L
TR-10L-6L-10L
TR-10L-8L-10L
TR-10L-10L-6L
TR-8L-12L-8L
TR-12L-6L-12L
TR-12L-8L-8L
TR-12L-8L-12L
TR-12L-10L-10L
TR-12L-10L-12L
TR-12L-12L-10L
TR-10L-15L-10L
TR-12L-15L-12L
TR-15L-6L-15L
TR-15L-10L-15L
TR-15L-12L-12L
TR-15L-12L-15L
TR-15L-15L-12L
TR-12L-18L-12L
TR-18L-10L-10L
TR-18L-10L-18L
TR-18L-12L-18L
TR-18L-15L-18L
TR-18L-18L-10L
TR-22L-10L-22L
TR-22L-12L-22L
TR-22L-15L-15L
TR-22L-15L-22L
TR-22L-18L-18L
TR-22L-18L-22L
TR-22L-22L-18L
TR-28L-10L-28L
TR-28L-12L-28L
TR-28L-15L-28L
TR-28L-18L-28L
TR-28L-22L-22L
TR-28L-22L-28L
0.92
0.95
1.14
1.22
1.21
1.22
1.21
1.60
1.59
1.60
1.64
1.62
1.67
1.67
1.88
1.92
1.94
2.07
1.88
2.11
2.08
2.63
2.59
2.97
2.97
3.16
2.96
3.91
3.97
3.77
4.10
4.22
4.35
4.31
5.57
5.63
5.97
5.97
6.02
6.03
Suffixes the following material code along with above
part number while sending your enquiries / orders.
Material
Code
Example
SS316L
SS304
EL
I
TR-6L-8L-6L/EL
TR-6L-8L-6L /I
The material SS316Ti are available on request
20
TEE-REDUCER FITTINGS - TR
TUBE CONNECTION : All three sides according to DIN2353
S1
S4
S3
T1
L3
L6
T3
S2
T2
L4
L5
L1
SERIES
S-Heavy
PN 630
PN 630
PN 400
PN 400
PN 400
PN 400
L2
Dimensions are in millimeters
TUBE O. D.
T1
T2
T3
L1
L2
L3
L4
L5
L6
S1
S2
S3
S4
10
12
12
12
12
16
16
16
16
16
20
20
20
20
25
25
25
6
8
8
10
16
6
8
10
12
20
10
12
16
25
16
20
30
10
8
12
12
12
16
16
16
16
16
20
20
20
20
25
25
25
34
38
38
38
42
43
43
43
43
47
48
48
48
53
54
54
61
34
37
38
38
42
43
43
43
43
47
48
48
48
53
54
54
61
33
37
37
38
43
41
41
42
42
48
46
46
47
54
52
53
62
17.5
21.5
21.5
21.5
25.5
24.5
24.5
24.5
24.5
28.5
26.5
26.5
26.5
31.5
30
30
37
17.5
22
21.5
21.5
25.5
24.5
24.5
24.5
24.5
28.5
26.5
26.5
26.5
31.5
30
30
37
18
22
22
21.5
24.5
26
26
25.5
25.5
26.5
29.5
29.5
28.5
30
33.5
31.5
35.5
22
24
24
24
24
30
30
30
30
30
36
36
36
36
46
46
46
17
19
19
22
30
17
19
22
24
36
22
24
30
46
30
36
50
22
19
24
24
24
30
30
30
30
30
36
36
36
36
46
46
46
17
17
17
17
24
24
24
24
24
27
27
27
27
36
36
36
41
Dimension L1, L2,& L3 are approximate length with tightened nut.
The above part numbers are for complete fittings including Nut, Bite Ring and Body.
Only body without Nut and Bite Ring are available on request.
If you have requirements other than above size and Dimensions,
please contact us with complete details
Dimensions are for reference only and are subject to change without notice.
SEALEXCEL
PART NO.
APPROX. WT.
Kg per 10 pcs.
TR-10S-6S-10S
TR-12S-8S-8S
TR-12S-8S-12S
TR-12S-10S-12S
TR-12S-16S-12S
TR-16S-6S-16S
TR-16S-8S-16S
TR-16S-10S-16S
TR-16S-12S-16S
TR-16S-20S-16S
TR-20S-10S-20S
TR-20S-12S-20S
TR-20S-16S-20S
TR-20S-25S-20S
TR-25S-16S-25S
TR-25S-20S-25S
TR-25S-30S-25S
1.99
2.51
2.66
2.75
3.29
3.33
3.32
3.48
3.56
5.05
5.17
5.24
5.42
8.91
9.66
9.98
13.94
Suffixes the following material code along with above
part number while sending your enquiries / orders.
Material
Code
Example
SS316L
SS304
EL
I
TR-10S-6S-10S/EL
TR-10S-6S-10S/I
The material SS316Ti are available on request
21
STRAIGHT BULKHEAD FITTINGS - SV
S1
S4
M
S2
T
E
L4
L3
L1
SERIES
L-Light
PN 315
PN160
S-Heavy
PN 630
PN 400
PN 315
TUBE
O. D.
T
M
6
8
10
12
15
18
22
28
35
42
6
8
10
12
14
16
20
25
30
38
M 12 x1.5
M 14x1.5
M 16x1.5
M 18x1.5
M 22x1.5
M 26x1.5
M 30x2
M 36x2
M 45x2
M 52x2
M 14x1.5
M 16x1.5
M 18x1.5
M 20x1.5
M 22x1.5
M 24x1.5
M 30x2
M 36x2
M 42x2
M 52x2
L2
Dimensions are in millimeters
L1
L2
L3
L4
S1
S2
S4
22
23
25
25
27
30
33
35
40
42
27
28
31
31
35
35
39
44
48
53
42
42
43
44
46
49
51
52
58
59
44
44
46
47
50
50
55
59
64
68
7
8
10
10
12
13.5
16.5
18.5
18.5
19
12
13
14.5
14.5
17
16.5
17.5
20
21.5
22
27
27
28
29
31
32.5
34.5
35.5
36.5
36
29
29
29.5
30.5
32
31.5
33.5
35
37.5
37
17
19
22
24
27
32
36
41
50
60
19
22
24
27
30
32
41
46
50
65
14
17
19
22
27
32
36
41
50
60
17
19
22
24
27
30
36
46
50
60
17
19
22
24
30
36
41
46
55
65
19
22
24
27
30
32
41
46
50
65
S4Hexagonal Nut according to DIN 80705
Dimension E = 16 mm max.
Dimension L1 & L2 is approximate length with tightened nut.
The above part numbers are for complete fittings including Nut, Bite Ring and Body.
Only body without Nut and Bite Ring are available on request.
If you have requirements other than above size and Dimensions,
please contact us with complete details
Dimensions are for reference only and are subject to change without notice.
22
SEALEXCEL
PART NO.
APPROX. WT.
Kg per 10 pcs.
SV-6L
SV-8L
SV-10L
SV-12L
SV-15L
SV-18L
SV-22L
SV-28L
SV-35L
SV-42L
SV-6S
SV-8S
SV-10S
SV-12S
SV-14S
SV-16S
SV-20S
SV-25S
SV-30S
SV-38S
0.60
0.82
1.06
1.33
2.16
3.23
4.23
5.37
8.59
12.34
1.00
1.30
1.76
2.14
2.88
3.40
5.62
9.32
11.13
17.65
Suffixes the following material code along with above
part number while sending your enquiries / orders.
Material
Code
SS316L
SS304
EL
I
Example
SV-6L/EL
SV-6L/I
The material SS316Ti are available on request
BULKHEAD ELBOW FITTINGS - WSV
S3
D3
S4
S2
M
L1
L2
T
E
L4
L5
L6
SERIES
L-Light
PN 315
PN160
S-Heavy
PN 630
PN 400
PN 315
TUBE
O. D.
T
M
6
8
10
12
15
18
22
28
35
42
6
8
10
12
14
16
20
25
30
38
M 12 x1.5
M 14x1.5
M 16x1.5
M 18x1.5
M 22x1.5
M 26x1.5
M 30x2
M 36x2
M 45x2
M 52x2
M 14x1.5
M 16x1.5
M 18x1.5
M 20x1.5
M 22x1.5
M 24x1.5
M 30x2
M 36x2
M 42x2
M 52x2
Dimensions are in millimeters
D3
L1
L2
L4
L5
L6
S2
S3
S4
17
19
22
24
27
32
36
42
50
60
19
22
24
27
27
30
36
42
50
60
27
29
30
32
36
40
44
47
56
63
31
32
34
38
40
43
48
54
62
72
12
14
15
17
21
23.5
27.5
30.5
34.5
40
16
17
17.5
21.5
22
24.5
26.5
30
35.5
41
14
17
18
20
23
24
30
34
39
43
17
18
20
21
23
24
30
34
39
43
27
27
28
29
31
32.5
34.5
35.5
36.5
36
29
29
29.5
30.5
32
31.5
33.5
35
37.5
37
42
42
43
44
46
49
51
52
58
59
44
44
46
47
50
50
55
59
64
68
14
17
19
22
27
32
36
41
50
60
17
19
22
24
27
30
36
46
50
60
12
12
14
17
19
24
27
36
41
50
12
14
17
17
19
24
27
36
41
50
17
19
22
24
27
36
41
46
55
65
19
22
24
27
30
32
41
46
50
65
S4Hexagonal Nut according to DIN 80705
Dimension E = 16mm max.
Dimension L1 & L6 is approximate length with tightened nut.
The above part numbers are for complete fittings including Nut, Bite Ring and Body.
Only body without Nut and Bite Ring are available on request.
If you have requirements other than above size and Dimensions,
please contact us with complete details
Dimensions are for reference only and are subject to change without notice.
SEALEXCEL
PART NO.
APPROX. WT.
Kg per 10 pcs.
WSV-6L
WSV-8L
WSV-10L
WSV-12L
WSV-15L
WSV-18L
WSV-22L
WSV-28L
WSV-35L
WSV-42L
WSV-6S
WSV-8S
WSV-10S
WSV-12S
WSV-14S
WSV-16S
WSV-20S
WSV-25S
WSV-30S
WSV-38S
0.71
0.94
1.18
1.50
2.51
3.66
4.83
6.85
10.41
15.09
1.07
1.41
1.87
2.39
3.02
3.79
6.05
10.58
13.42
20.19
Suffixes the following material code along with above
part number while sending your enquiries / orders.
Material
Code
SS316L
SS304
EL
I
Example
WSV-6L/EL
WSV-6L/I
The material SS316Ti are available on request
23
WELD BULKHEAD FITTINGS - ESV
D4
S2
T
L2
L1
SERIES
L-Light
PN 315
PN 160
S-Heavy
PN 630
PN 400
PN 315
TUBE
O. D.
T
D4
L1
L2
S2
6
8
10
12
15
18
22
28
35
42
6
8
10
12
14
16
20
25
30
38
18
20
22
25
28
32
36
40
50
60
20
22
25
28
30
35
38
45
50
60
85
85
87
87
100
101
105
106
114
115
89
89
91
91
107
107
114
120
126
133
56
56
58
58
70
69
73
73
71
70
60
60
59
59
72
71
71
72
73
72
14
17
19
22
27
32
36
41
50
60
17
19
22
24
27
30
36
46
50
60
Dimensions are in millimeters
Dimension L1 is approximate length with tightened nut.
The above part numbers are for complete fittings including Nut, Bite Ring and Body.
Only body without Nut and Bite Ring are available on request.
If you have requirements other than above size and Dimensions,
please contact us with complete details
Dimensions are for reference only and are subject to change without notice.
24
SEALEXCEL
PART NO.
APPROX. WT.
Kg per 100 pcs.
ESV-6L
ESV-8L
ESV-10L
ESV-12L
ESV-15L
ESV-18L
ESV-22L
ESV-28L
ESV-35L
ESV-42L
ESV-6S
ESV-8S
ESV-10S
ESV-12S
ESV-14S
ESV-16S
ESV-20S
ESV-25S
ESV-30S
ESV-38S
1.32
1.53
1.82
2.31
3.50
4.60
5.66
6.06
10.22
14.73
1.71
2.06
2.65
3.22
4.45
5.80
7.29
11.59
13.54
19.30
Suffixes the following material code along with above
part number while sending your enquiries / orders.
Material
Example
Code
ESV-6L/EL
SS316L
EL
SS304
ESV-6L/I
I
The material SS316Ti are available on request
STRAIGHT MALE STUD FITTINGS - GER
MALE STUD THREAD : BSP (parallel with cutting face to DIN 3852 form B)
S1
S2
BSP
D1
Cutting Face
T
B1
L2
L1
SERIES
L-Light
PN 315
PN 160
TUBE
O. D.
T
MALE STUD
THREAD
BSP
B1
D1
L1
L2
S1
S2
6
6
6
6
8
8
8
8
10
10
10
10
12
12
12
12
12
15
15
15
18
18
18
22
22
22
28
28
28
28
35
35
35
35
35
42
42
42
1/8
1/4
3/8
1/2
1/8
1/4
3/8
1/2
1/8
1/4
3/8
1/2
1/8
1/4
3/8
1/2
3/4
3/8
1/2
3/4
3/8
1/2
3/4
1/2
3/4
1
1/2
3/4
1
1-1/4
1/2
3/4
1
1-1/4
1-1/2
1
1-1/4
1-1/2
8
12
12
14
8
12
12
14
8
12
12
14
8
12
12
14
16
12
14
16
12
14
16
14
16
18
14
16
18
20
14
16
18
20
22
18
20
22
14
18
22
26
14
18
22
26
14
18
22
26
14
18
22
26
32
22
26
32
22
26
32
26
32
39
26
32
39
50
26
32
39
49
55
39
49
55
31
37
38
41
31
37
38
41
33
38
39
42
34
39
39
42
45
41
43
46
41.5
45
46
47
49
51.5
48
50
52.0
55
53
55
57
59
63
60
62
64
8.5
10.0
11.5
12.0
8.5
10.0
11.5
12.0
10.5
11.0
12.5
13.0
11.5
12.0
12.5
13.0
14.0
13.5
14.0
15.0
14.0
14.5
14.5
16.5
16.5
17.5
17.5
17.5
17.5
18.3
17.5
17.5
17.5
17.5
19.5
19.0
19.0
19.0
14
19
22
27
14
19
22
27
17
19
22
27
19
19
22
27
32
24
27
32
27
27
32
32
32
41
41
41
41
50
46
46
46
50
55
55
55
55
14
14
14
14
17
17
17
17
19
19
19
19
22
22
22
22
22
27
27
27
32
32
32
36
36
36
41
41
41
41
50
50
50
50
50
60
60
60
Dimensions are in millimeters
Dimension L1 is approximate length with tightened nut.
The above part numbers are for complete fittings including Nut, Bite Ring and Body.
Only body without Nut and Bite Ring are available on request.
If you have requirements other than above size and Dimensions,
please contact us with complete details
Dimensions are for reference only and are subject to change without notice.
SEALEXCEL
PART NO.
APPROX. WT.
Kg per 10 pcs.
GER-6L-2RP
GER-6L-4RP
GER-6L-6RP
GER-6L-8RP
GER-8L-2RP
GER-8L-4RP
GER-8L-6RP
GER-8L-8RP
GER-10L-2RP
GER-10L-4RP
GER-10L-6RP
GER-10L-8RP
GER-12L-2RP
GER-12L-4RP
GER-12L-6RP
GER-12L-8RP
GER-12L-12RP
GER-15L-6RP
GER-15L-8RP
GER-15L-12RP
GER-18L-6RP
GER-18L-8RP
GER-18L-12RP
GER-22L-8RP
GER-22L-12RP
GER-22L-16RP
GER-28L-8RP
GER-28L-12RP
GER-28L-16RP
GER-28L-20RP
GER-35L-8RP
GER-35L-12RP
GER-35L-16RP
GER-35L-20RP
GER-35L-24RP
GER-42L-16RP
GER-42L-20RP
GER-42L-24RP
0.25
0.35
0.56
0.73
0.32
0.43
0.60
0.90
0.41
0.51
0.64
0.92
0.54
0.59
0.70
0.94
1.47
1.00
1.16
1.62
1.33
1.36
1.76
1.77
1.89
2.70
2.41
2.56
2.68
4.14
3.48
3.56
3.88
4.30
5.09
5.65
5.74
5.87
Suffixes the following material code along with above
part number while sending your enquiries / orders.
Material
Code
SS316L
SS304
EL
I
Example
GER-6L-2RP/EL
GER-6L-2RP/I
The material SS316Ti are available on request
25
STRAIGHT MALE STUD FITTINGS - GER
MALE STUD THREAD : BSP (parallel with cutting face to DIN 3852 form B)
S1
S2
D1
BSP
Cutting Face
T
B1
L2
L1
SERIES
S-Heavy
PN 630
PN 400
PN 250
TUBE
O. D.
T
MALE STUD
THREAD
BSP
B1
D1
L1
L2
S1
S2
6
6
6
6
8
8
8
10
10
10
12
12
12
14
14
16
16
16
20
20
20
20
25
25
25
30
30
38
38
1/8
1/4
3/8
1/2
1/4
3/8
1/2
1/4
3/8
1/2
1/4
3/8
1/2
3/8
1/2
3/8
1/2
3/4
1/2
3/4
1
1-1/4
3/4
1
1-1/4
1
1-1/4
1-1/4
1-1/2
8
12
12
14
12
12
14
12
12
14
12
12
14
12
14
12
14
16
14
16
18
20
16
18
20
18
20
20
22
14
18
22
26
18
22
26
18
22
26
18
22
26
22
26
22
26
32
26
32
39
49
32
39
49
39
49
49
55
35
40
42
47
42
42
47
43
43
48
45
45
48
48
51
48
51
55
56
58
62
64
63
65
67
68
70
79
79
12.5
13.0
15.5
18.0
15.0
15.5
18.0
14.5
15.0
17.5
16.5
17.0
17.5
18.5
19.0
18.0
18.5
20.5
20.5
20.5
22.5
22.5
23.0
23.0
23.0
23.5
23.5
26.0
26.0
14
19
22
27
19
22
27
19
22
27
22
22
27
24
27
27
27
32
32
32
41
50
41
41
50
46
50
55
55
17
17
17
17
19
19
19
22
22
22
24
24
24
27
27
30
30
30
36
36
36
36
46
46
46
50
50
60
60
Dimensions are in millimeters
Dimension L1 is approximate length with tightened nut.
The above part numbers are for complete fittings including Nut, Bite Ring and Body.
Only body without Nut and Bite Ring are available on request.
If you have requirements other than above size and Dimensions,
please contact us with complete details
Dimensions are for reference only and are subject to change without notice.
APPROX. WT.
Kg per 10 pcs.
SEALEXCEL
PART NO.
GER-6S-2RP
GER-6S-4RP
GER-6S-6RP
GER-6S-8RP
GER-8S-4RP
GER-8S-6RP
GER-8S-8RP
GER-10S-4RP
GER-10S-6RP
GER-10S-8RP
GER-12S-4RP
GER-12S-6RP
GER-12S-8RP
GER-14S-6RP
GER-14S-8RP
GER-16S-6RP
GER-16S-8RP
GER-16S-12RP
GER-20S-8RP
GER-20S-12RP
GER-20S-16RP
GER-20-20RP
GER-25S-12RP
GER-25S-16RP
GER-25S-20RP
GER-30S-16RP
GER-30S-20RP
GER-38S-20RP
GER-38S-24RP
0.40
0.53
0.75
1.01
0.62
0.80
1.21
0.75
0.88
1.29
0.93
0.98
0.93
1.28
1.50
1.55
1.64
2.29
2.53
2.62
3.84
4.98
4.64
4.86
6.41
5.78
6.63
9.20
9.02
Suffixes the following material code along with above
part number while sending your enquiries / orders.
Material
Code
SS316L
SS304
EL
I
Example
GER-6S-4RP/EL
GER-6S-4RP/I
The material SS316Ti are available on request
26
STRAIGHT MALE STUD FITTINGS - GEM
MALE STUD THREAD : Metric (parallel with cutting face to DIN 3852 form B
S1
S2
Metric
D1
Cutting Face
T
B1
L2
L1
SERIES
L-Light
PN316
PN 160
S-Heavy
PN 630
PN 400
PN 250
TUBE
O. D.
T
MALE STUD
THREAD
METRIC
B1
D1
L1
L2
S1
S2
6
8
10
12
15
18
22
28
35
42
6
8
10
12
14
16
20
25
30
38
M 10x1
M 12x1.5
M 14x1.5
M 18x1.5
M 18x1.5
M 22x1.5
M 26x1.5
M 33x2
M 42x2
M 48x2
M 12x1.5
M 14x1.5
M 16x1.5
M 18x1.5
M 20x1.5
M 22x1.5
M 27x2
M 33x2
M 42x2
M 48x2
8
12
12
12
12
14
16
18
20
22
12
12
12
12
14
14
16
18
20
22
14
17
19
21
23
27
31
39
49
55
17
19
21
23
25
27
32
39
49
55
31
37
38
39
41
45
49
52
59
64
40
42
43
45
51
51
48
65
70
79
8.5
10
11
12.5
13.5
14.5
16.5
17.5
17.5
19
13
15
15
17
19
18.5
20.5
23
23.5
26
14
17
19
22
24
27
32
41
50
55
17
19
22
24
27
27
32
41
50
55
14
17
19
22
27
32
36
41
50
60
17
19
22
24
27
30
36
46
50
60
Dimensions are in millimeters
Dimension L1 is approximate length with tightened nut.
The above part numbers are for complete fittings including Nut, Bite Ring and Body.
Only body without Nut and Bite Ring are available on request.
If you have requirements other than above size and Dimensions,
please contact us with complete details
Dimensions are for reference only and are subject to change without notice.
SEALEXCEL
PART NO.
APPROX. WT.
Kg per 100 pcs.
GEM-6L-10MP
GEM-8L-12MP
GEM-10L-14MP
GEM-12L-16MP
GEM-15L-18MP
GEM-18L-22MP
GEM-22L-26MP
GEM-28L-33MP
GEM-35L-42MP
GEM-42L-48MP
GEM-6S-12MP
GEM-8S-14MP
GEM-10S-16MP
GEM-12S-18MP
GEM-14S-20MP
GEM-16S-22MP
GEM-20S-27MP
GEM-25S-33MP
GEM-30S-42MP
GEM-38S-48MP
0.24
0.38
0.51
0.68
0.95
1.40
1.88
2.68
4.34
5.92
0.48
0.64
0.86
1.09
1.49
1.66
2.62
4.88
6.62
9.09
Suffixes the following material code along with above
part number while sending your enquiries / orders.
Material
Code
SS316L
SS304
EL
I
Example
GEM-6L-10MP/EL
GEM-6L-10MP/I
The material SS316Ti are available on request
27
STRAIGHT MALE STUD FITTINGS-GE.ED
MALE STUD THREAD : BSP (parallel with ED Sealing)
S1
S2
D1
BSP
ED Seal
T
ED Seal : Buna-N is Standard
â
Viton are available on request
For Viton: Suffix code 'V' alongwith
the part number of the fittings
Example : GE-6L-2GED/ELV
L2
B1
L1
SERIES
L-Light
PN 315
PN 160
S-Heavy
PN 630
PN 400
PN 315
TUBE
O. D.
T
MALE STUD
THREAD
BSP
B1
D1
L1
L2
S1
S2
6
6
8
8
8
10
10
10
12
12
12
15
15
18
18
22
28
35
42
6
8
8
10
10
10
12
12
12
14
16
16
16
20
25
25
30
38
1/8
1/4
1/8
1/4
3/8
1/4
3/8
1/2
1/4
3/8
1/2
3/8
1/2
1/2
3/4
3/4
1
1-1/4
1-1/2
1/4
1/4
3/8
1/4
3/8
1/2
1/4
3/8
1/2
1/2
3/8
1/2
3/4
3/4
1/2
1
1-1/4
1-1/2
8
12
8
12
12
12
12
14
12
12
14
12
14
14
16
16
18
20
22
12
12
12
12
12
14
12
12
14
14
12
14
16
16
14
18
20
22
14
19
14
19
22
19
22
27
19
22
27
22
27
27
32
32
40
50
55
19
19
22
19
22
27
19
22
32
27
22
27
32
32
27
40
50
55
31
37
31
37
38
38
39
42
39
39
42
41
43
45
47
49
52
59
64
40
42
42
43
43
48
45
45
48
51
48
51
55
58
61
65
70
79
8.5
10
8.5
10
11.5
11
12.5
13
12
12.5
13
13.5
14
14.5
14.5
16.5
17.5
17.5
19
13
15
15.5
14.5
15
17.5
16.5
17
17.5
19
18
18.5
20.5
20.5
23
23
23.5
26
14
19
14
19
22
19
22
27
19
22
27
24
27
27
32
32
41
50
55
19
19
22
19
22
27
22
22
27
27
27
27
32
32
41
41
50
55
14
14
17
17
17
19
19
19
22
22
22
27
27
32
32
36
41
50
60
17
19
19
22
22
22
24
24
24
27
30
30
30
36
46
46
50
60
Dimensions are in millimeters
Dimension L1 is approximate length with tightened nut.
The above part numbers are for complete fittings including Nut, Bite Ring and Body.
Only body without Nut and Bite Ring are available on request.
If you have requirements other than above size and Dimensions,
please contact us with complete details
Dimensions are for reference only and are subject to change without notice.
28
SEALEXCEL
PART NO.
APPROX. WT.
Kg per 10 pcs.
GE-6L-2GED
GE-6L-4GED
GE-8L-2GED
GE-8L-4GED
GE-8L-6GED
GE-10L-4GED
GE-10L-6GED
GE-10L-8GED
GE-12L-4GED
GE-12L-6GED
GE-12L-8GED
GE-15L-6GED
GE-15L-8GED
GE-18L-8GED
GE-18L-12GED
GE-22L-12GED
GE-28L-16GED
GE-35L-20GED
GE-42L-24GED
GE-6S-4GED
GE-8S-4GED
GE-8S-6GED
GE-10S-4GED
GE-10S-6GED
GE-10S-8GED
GE-12S-4GED
GE-12S-6GED
GE-12S-8GED
GE-14S-8GED
GE-16S-6GED
GE-16S-8GED
GE-16S-12GED
GE-20S-12GED
GE-25S-8GED
GE-25S-16GED
GE-30S-20GED
GE-38S-24GED
0.24
0.39
0.29
0.43
0.29
0.47
0.62
0.92
0.58
0.68
0.95
0.97
1.16
1.35
1.74
1.88
2.70
4.26
5.82
0.53
0.62
0.78
0.73
0.87
1.29
0.93
0.99
1.36
1.50
1.52
1.61
2.22
2.59
2.52
4.85
6.59
9.04
Suffixes the following material code along with above
part number while sending your enquiries / orders.
Material
Code
SS316L
SS304
EL
I
Example
GE-6L-2GED/EL
GE-6L-2GED/I
The material SS316Ti are available on request
STRAIGHT MALE STUD FITTINGS-GE.M.ED
MALE STUD THREAD : Metric (parallel with ED Sealing)
S1
S2
Metric
D1
ED Seal
T
L2
B1
L1
SERIES
L-Light
PN 315
PN 160
S-Heavy
PN 630
PN 400
PN 315
TUBE
O. D.
T
MALE STUD
THREAD
METRIC
B1
D1
L1
L2
S1
S2
6
8
10
12
12
12
15
15
18
22
28
35
42
6
8
10
12
14
16
20
25
30
38
M 10x1
M 12x1.5
M 14x1.5
M 16x1.5
M 18x1.5
M 22x1.5
M 18x1.5
M 22x1.5
M 22x1.5
M 26x1.5
M 33x2
M 42x2
M 48x2
M 12x1.5
M 14x1.5
M 16x1.5
M 18x1.5
M 20x1.5
M 22x1.5
M 27x2
M 33x2
M 42x3
M 48x2
8
12
12
12
12
14
12
14
14
16
18
20
22
12
12
12
12
14
14
16
18
20
22
14
17
19
22
24
27
24
27
27
32
40
50
55
17
19
22
24
26
27
32
40
50
55
31
37
38
39
39
43
41
44
45
49
52
59
64
40
42
43
45
51
51
58
65
70
79
8.5
10
11
12.5
12.5
14
13.5
15
14.5
16.5
17.5
17.5
19
13
15
15
17
19
18.5
20.5
23
23.5
26
14
17
19
22
24
27
24
27
27
32
41
50
55
17
19
22
24
27
27
32
41
50
55
14
17
19
22
22
22
27
27
32
36
41
50
60
17
19
22
24
27
30
36
46
50
60
Dimensions are in millimeters
ED Seal : Buna-N is Standard
â
Viton are available on request
For Viton: Suffix code 'V' alongwith the part number of the fittings
Example : GE-6L-10MED/ELV
Dimension L1 is approximate length with tightened nut.
The above part numbers are for complete fittings including Nut, Bite Ring and Body.
Only body without Nut and Bite Ring are available on request.
If you have requirements other than above size and Dimensions,
please contact us with complete details
Dimensions are for reference only and are subject to change without notice.
SEALEXCEL
PART NO.
APPROX. WT.
Kg per 10 pcs.
GE-6L-10MED
GE-8L-12MED
GE-10L-14MED
GE-12L-16MED
GE-12L-18MED
GE-12L-22MED
GE-15L-18MED
GE-15L-22MED
GE-18L-22MED
GE-22L-26MED
GE-28L-33MED
GE-35L-42MED
GE-42L-48MED
GE-6S-12MED
GE-8S-14MED
GE-10S-16MED
GE-12S-18MED
GE-14S-20MED
GE-16S-22MED
GE-20S-27MED
GE-25S-33MED
GE-30S-42MED
GE-38S-48MED
0.24
0.38
0.48
0.67
0.74
1.09
0.95
1.20
1.38
1.88
2.69
4.35
5.94
0.47
0.63
0.86
1.07
1.48
1.65
2.60
4.83
6.64
9.10
Suffixes the following material code along with above
part number while sending your enquiries / orders.
Material
Code
SS316L
SS304
EL
I
Example
GE-6L-10MED/EL
GE-6L-10MED/I
The material SS316Ti are available on request
29
STRAIGHT MALE STUD FITTINGS - GEO
MALE STUD THREAD : Metric with O-Ring sealing
PORT TAPPING : According to ISO 6149 or DIN 3852 part 3
S1
S2
Metric
D1
O-Ring
T
B1
L2
L1
SERIES
L-Light
PN 315
PN 160
S-Heavy
PN 630
PN 400
TUBE
O. D.
T
MALE STUD
THREAD
METRIC
B1
D1
L1
L2
S1
S2
6
8
10
12
15
18
22
28
35
6
8
10
12
16
20
25
30
M 10 x 1
M 12 x 1.5
M 14 x 1.5
M 16 x 1.5
M 18 x 1.5
M 22 x 1.5
M 26 x 1.5
M 33 x 2
M 42 x 2
M 12 x 1.5
M 14 x 1.5
M 16 x 1.5
M 18 x 1.5
M 22 x 1.5
M 27 x 2
M 33 x 2
M 42 x 2
10
11.5
11.5
13
14.5
15.5
16
19
19.5
11.5
11.5
13
14.5
15.5
19
19
19.5
12.9
16.9
18.9
20.9
22.9
26.9
30.9
37.9
47.9
16.9
18.9
20.9
22.9
26.9
31.9
37.9
47.9
33
36.5
37.5
40
43.5
45.5
48
53
58.5
38.5
38.5
42
43.5
48.5
56
60
64.5
8.5
10
11
12
13.5
14
16
17.5
17.5
12
12
12.5
13
15
15
17
18.5
14
17
19
22
24
27
32
41
50
17
19
22
24
27
32
41
50
14
17
19
22
27
32
36
41
50
17
19
22
24
30
36
46
50
Dimensions are in millimeters
O-Ring : Buna-N is standard
Vitonâ are available on request
For Viton: Suffix code 'V' alongwith the part number of the fittings
Example : GEO-6L-10M/ELV
Dimension L1 is approximate length with tightened nut.
The above part numbers are for complete fittings including Nut, Bite Ring and Body.
Only body without Nut and Bite Ring are available on request.
If you have requirements other than above size and Dimensions,
please contact us with complete details
Dimensions are for reference only and are subject to change without notice.
30
O-RING
SEALEXCEL
PART NO.
APPROX. WT.
Kg per 10 pcs.
8.2 x 1.5
9.4 x 2.1
11.4 x 2.1
13.4 x 2.1
15.4 x 2.1
19.4 x 2.1
22.7 x 2.8
29.7 x 2.8
38.7 x 2.8
9.4 x 2.1
11.4 x 2.1
13.4 x 2.1
15.4 x 2.1
19.4 x 2.1
23.7 x 2.8
29.7 x 2.8
38.7 x 2.8
GEO-6L-10M
GEO-8L-12M
GEO-10L-14M
GEO-12L-16M
GEO-15L-18M
GEO-18L-22M
GEO-22L-26M
GEO-28L-33M
GEO-35L-42M
GEO-6S-12M
GEO-8S-14M
GEO-10S-16M
GEO-12S-18M
GEO-16S-22M
GEO-20S-27M
GEO-25S-33M
GEO-30S-42M
0.24
0.38
0.51
0.68
0.95
1.40
1.88
2.68
4.34
0.48
0.64
0.86
1.09
1.66
2.62
4.88
6.62
Suffixes the following material code along with above
part number while sending your enquiries / orders.
Example
Material
Code
SS316L
EL GEO-6L-10M/EL
GEO-6L-10M/I
SS304
I
The material SS316Ti are available on request
STRAIGHT MALE STUD FITTINGS- GEO.UN
MALE STUD THREAD : UN/UNF with O-Ring sealing
S1
S2
D1
UN/UNF
O-Ring
T
L2
B1
L1
SERIES
L-Light
PN 315
PN 160
S-Heavy
PN 630
PN 400
PN 315
TUBE
O. D.
T
MALE STUD
THREAD
UN/UNF
B1
D1
L1
L2
S1
S2
8
10
12
12
12
15
18
18
22
22
22
28
28
35
35
42
8
10
12
12
16
16
20
20
20
25
25
30
30
38
7/16-20
7/16-20
9/16-18
3/4-16
7/8-14
3/4-16
3/4-16
7/8-14
7/8-14
1-1/16-12
1-5/16-12
1-1/16-12
1-5/16-12
1-5/16-12
1-5/8-12
1-5/8-12
7/16-20
9/16-18
9/16-18
3/4-16
3/4-16
7/8-14
3/4-16
7/8-14
1-1/16-12
1-1/16-12
1-5/16-12
1-5/16-12
1-5/8-12
1-5/8-12
9
10
10
11
12.7
11
11
12.7
12.7
15
15
15
15
15
15
15
9
10
10
11
11
12.7
11
12.7
15
15
15
15
15
15
14.4
14.4
17.6
22.3
25.5
22.3
22.3
25.5
25.5
31.9
38.2
31.9
38.2
38.2
47.7
47.7
16.0
17.6
17.6
22.3
22.3
25.5
22.3
25.5
31.9
31.9
38.2
38.2
47.7
47.7
34
36
36
39
41.7
40
42
43.7
45.7
48
49
49
49
54
54
57
39
41
41
45
45
49.7
53
54.7
57
62
62
65
65
72
10
11
11
13
14.3
14
14.5
14.8
16.8
16.5
17.5
17.5
17.5
17.5
17.5
19
15
14.5
14.5
17.5
15.5
18.8
20.5
20.8
20.5
23.0
23.0
23.5
23.5
26.0
17
17
19
24
27
24
27
27
32
32
41
41
41
46
50
55
17
19
22
24
24
27
32
32
32
36
41
46
50
55
17
19
22
22
22
27
32
32
36
36
36
41
41
50
50
60
19
22
24
24
30
30
36
36
36
46
46
50
50
60
Dimensions are in millimeters
O-Ring : Buna-N is standard
â
Viton are available on request
For Viton: Suffix code 'V' alongwith the part number of the fittings
Example : GEO-8L-7UN/ELV
Dimension L1 is approximate length with tightened nut.
The above part numbers are for complete fittings including Nut, Bite Ring and Body.
Only body without Nut and Bite Ring are available on request.
If you have requirements other than above size and Dimensions,
please contact us with complete details
Dimensions are for reference only and are subject to change without notice.
O-RING
SEALEXCEL
PART NO.
APPROX. WT.
Kg per 10 pcs.
8.92 x 1.83
8.92 x 1.83
11.9 x 1.98
16.36 x 2.20
19.18 x 2.46
16.36 x 2.20
16.36 x 2.20
19.18 x 2.46
19.18 x 2.46
23.47 x 2.95
29.74 x 2.95
23.47 x 2.95
29.74 x 2.95
29.74 x 2.95
37.46 x 3
37.46 x 3
8.92 x 1.83
11.9 x 1.98
11.9 x 1.98
16.36 x 2.20
16.36 x 2.20
19.18 x 2.46
16.36 x 2.20
19.18 x 2.46
23.47 x 2.95
23.47 x 2.95
29.74 x 2.95
29.74 x 2.95
37.46 x 3
37.46 x 3
GEO-8L-7UN
GEO-10L-7UN
GEO-12L-9UN
GEO-12L-12UN
GEO-12L-14UN
GEO-15L-12UN
GEO-18L-12UN
GEO-18L-14UN
GEO-22L-14UN
GEO-22L-17UN
GEO-22L-21UN
GEO-28L-17UN
GEO-28L-21UN
GEO-35L-21UN
GEO-35L-26UN
GEO-42L-26UN
GEO-8S-7UN
GEO-10S-9UN
GEO-12S-9UN
GEO-12S-12UN
GEO-16S-12UN
GEO-16S-14UN
GEO-20S-12UN
GEO-20S-14UN
GEO-20S-17UN
GEO-25S-17UN
GEO-25S-21UN
GEO-30S-21UN
GEO-30S-26UN
GEO-38S-26UN
0.36
0.42
0.56
0.76
1.01
0.97
1.31
1.37
1.80
1.88
2.48
2.52
2.62
3.76
4.10
5.76
0.54
0.74
0.86
1.09
1.35
1.64
2.40
2.52
2.60
4.25
4.77
5.63
6.34
8.94
Suffixes the following material code along with above
part number while sending your enquiries / orders.
Material
Code
SS316L
SS304
EL
I
Example
GEO-8L-7UN/EL
GEO-8L-7UN/I
The material SS316Ti are available on request
31
STRAIGHT MALE STUD FITTINGS - GE
MALE STUD THREAD : BSP (Taper) / Metric (Taper)
BSPT/Metric (Taper)
S1
S2
T
B1
L3
L1
MALE STUD THREAD : BSP (Taper)
SERIES
L
Light
PN 315
PN 160
TUBE
O. D.
T
MALE STUD
THREAD
BSPT
B1
L1
L3
S1
S2
6
6
8
8
10
12
12
12
15
15
18
22
28
35
42
1/8
1/4
1/8
1/4
1/4
1/4
3/8
1/2
3/8
1/2
1/2
3/4
1
1-1/4
1-1/2
8
12
8
12
12
12
12
14
12
14
14
16
18
20
22
30
35
31
35
36
37
37
39
38
40
42
46
49
56
61
15.0
20.0
16.0
20.0
21.0
22.0
22.0
24.0
23.0
25.0
25.5
29.5
32.5
34.5
38.0
12
17
17
17
17
19
19
24
24
24
27
32
41
46
55
14
14
17
17
19
22
22
22
27
27
32
36
41
50
62
Dimensions are in millimeters
APPROX. WT.
Kg per 10 pcs.
SEALEXCEL
PART NO.
GE-6L-2RT
GE-6L-4RT
GE-8L-2RT
GE-8L-4RT
GE-10L-4RT
GE-12L-4RT
GE-12L-6RT
GE-12L-8RT
GE-15L-6RT
GE-15L-8RT
GE-18L-8RT
GE-22L-12RT
GE-28L-16RT
GE-35L-20RT
GE-42L-24RT
0.22
0.35
0.31
0.38
0.44
0.80
0.60
0.80
0.93
1.03
1.28
1.85
2.54
3.92
5.73
MALE STUD THREAD : Metric (Taper)
SERIES
L
Light
PN 315
PN 160
S-Heavy
PN 630
TUBE
O. D.
T
8
10
10
10
12
12
12
15
15
18
22
12
16
MALE STUD
THREAD
METRIC
TAPER
M 18x1.5
M 16x1.5
M 18x1.5
M 22x1.5
M 14x1.5
M 18x1.5
M 22x1.5
M 16x1.5
M 22x1.5
M 18x1.5
M 22x1.5
M 22x1.5
M 18x1.5
Dimensions are in millimeters
B1
D1
L1
L3
S1
S2
12
12
12
14
12
12
14
12
14
12
14
14
12
23
21
23
27
19
23
27
21
27
23
27
27
23
38
39
39
43
38
39
43
40
44
42
47
48
48
11.5
12
12.5
14
11
12.5
14
13
15
14
16.5
17.5
18
19
17
19
24
19
19
24
24
24
27
32
24
27
17
19
19
19
22
22
22
27
27
32
36
24
30
Dimension L1 is approximate length with tightened nut.
The above part numbers are for complete fittings including Nut, Bite Ring and Body.
Only body without Nut and Bite Ring are available on request.
If you have requirements other than above size and Dimensions,
please contact us with complete details
Dimensions are for reference only and are subject to change without notice.
32
SEALEXCEL
PART NO.
APPROX. WT.
Kg per 100 pcs.
GE-8L-18MTR
GE-10L-16MTR
GE-10L-18MTR
GE-10L-22MTR
GE-12L-14MTR
GE-12L-18MTR
GE-12L-22MTR
GE-15L-16MTR
GE-15L-22MTR
GE-18L-18MTR
GE-22L-22MTR
GE-12S-22MTR
GE-16S-18MTR
0.67
0.60
0.70
0.92
0.57
0.74
1.03
0.94
1.21
1.32
1.78
1.30
1.57
Suffixes the following material code along with above
part number while sending your enquiries / orders.
Material
Code
SS316L
SS304
EL
I
Example
GE-6L-2RT/EL
GE-6L-2RT/I
The material SS316Ti are available on request
STRAIGHT MALE STUD FITTINGS - GE
MALE STUD THREAD - NPT to ANSI B1.20.1
S2
NPT
S1
T
B1
L3
L1
SERIES
L-Light
PN315
PN 160
S-Heavy
PN 630
PN 400
PN 315
TUBE
O. D.
T
MALE STUD
THREAD
NPT
B1
L1
L3
S1
S2
6
6
8
10
10
12
12
12
15
18
22
28
35
42
6
8
10
10
12
12
12
14
16
20
25
30
38
1/8
1/4
1/4
1/4
3/8
1/4
3/8
1/2
1/2
1/2
3/4
1
1-1/4
1-1/2
1/4
1/4
1/4
3/8
1/4
3/8
1/2
1/2
1/2
3/4
1
1-1/4
1-1/2
9.7
14.3
14.3
14.3
14.3
14.3
14.3
19.0
19.0
19.0
19.0
24.0
25.0
26.0
14.3
14.3
14.3
14.3
14.3
14.3
19.0
19.0
19.0
19.0
24.0
25.0
26.0
32
38
38
39
40
40
40
45
46
48
50
56
62
65
43
43
44
44
46
46
51
54
54
59
69
73
80
17
23
23
24
25
25
25
30
31
31.5
33.5
39.5
40.5
42
28
28
27.5
27.5
29.5
29.5
34.5
36
35.5
37.5
45
46.5
49
12
17
17
17
19
19
19
22
24
27
32
41
46
55
17
17
19
19
22
22
22
24
27
32
41
46
55
14
14
17
19
19
22
22
22
27
32
36
41
50
60
17
19
22
22
24
24
24
27
30
36
46
50
60
Dimensions are in millimeters
Dimension L1 is approximate length with tightened nut.
The above part numbers are for complete fittings including Nut, Bite Ring and Body.
Only body without Nut and Bite Ring are available on request.
If you have requirements other than above size and Dimensions,
please contact us with complete details
Dimensions are for reference only and are subject to change without notice.
SEALEXCEL
PART NO.
APPROX. WT.
Kg per 10 pcs.
GE-6L-2N
GE-6L-4N
GE-8L-4N
GE-10L-4N
GE-10L-6N
GE-12L-4N
GE-12L-6N
GE-12L-8N
GE-15L-8N
GE-18L-8N
GE-22L-12N
GE-28L-16N
GE-35L-20N
GE-42L-24N
GE-6S-4N
GE-8S-4N
GE-10S-4N
GE-10S-6N
GE-12S-4N
GE-12S-6N
GE-12S-8N
GE-14S-8N
GE-16S-8N
GE-20S-12N
GE-25S-16N
GE-30S-20N
GE-38S-24N
0.23
0.38
0.41
0.45
0.60
0.58
0.64
0.89
1.07
1.42
1.94
2.99
4.89
5.82
0.55
0.59
0.76
0.81
0.94
0.98
1.19
1.43
1.67
2.59
4.97
6.37
9.12
Suffixes the following material code along with above
part number while sending your enquiries / orders.
Material
Code
SS316L
SS304
EL
I
Example
GE-6L-2N/EL
GE-6L-2N/I
The material SS316Ti are available on request
33
MALE STUD ELBOW FITTINGS - WE
MALE STUD THREAD : BSP (Taper) / Metric (Taper)
S3
S2
B1
L3
T
BSPT
or Metric Taper
L2
L1
MALE STUD THREAD : BSP (Taper)
SERIES
L-Light
PN 315
S-Heavy
PN 400
TUBE
O. D.
T
MALE STUD
THREAD
BSPT
B1
L1
L2
L3
S2
S3
6
8
10
12
15
18
6
8
10
12
14
16
1/8
1/4
1/4
3/8
1/2
1/2
1/4
1/4
3/8
3/8
1/2
1/2
8
12
12
12
14
17
14
12
12
12
14
17
27
29
30
32
36
40
31
32
34
38
40
43
12
14
15
17
21
23.5
16
17
17.5
21.5
22
24.5
20
26
27
28
34
36
26
27
28
28
32
32
14
17
19
22
27
32
17
19
22
24
27
30
12
12
14
17
19
24
14
14
17
19
19
24
Dimensions are in millimeters
SEALEXCEL
PART NO.
APPROX. WT.
Kg per 10 pcs.
WE-6L-2RT
WE-8L-4RT
WE-10L-4RT
WE-12L-6RT
WE-15L-8RT
WE-18L-8RT
WE-6S-4RT
WE-8S-4RT
WE-10S-6RT
WE-12S-6RT
WE-14S-8RT
WE-16S-8RT
0.40
0.62
0.81
1.13
1.38
1.70
0.73
0.94
1.31
1.62
1.55
1.98
SEALEXCEL
PART NO.
APPROX. WT.
Kg per 10 pcs.
WE-6L-10MTR
WE-8L-12MTR
WE-10L-14MTR
WE-12L-16MTR
WE-15L-18MTR
WE-18L-22MTR
WE-6S-12MTR
WE-8S-14MTR
WE-10S-16MTR
WE-12S-18MTR
WE-14S-20MTR
WE-16S-22MTR
0.40
0.62
0.82
1.17
1.22
1.80
0.83
0.99
1.34
1.70
1.49
2.02
MALE STUD THREAD : Metric (Taper)
SERIES
L-Light
PN 315
S-Heavy
PN 400
TUBE
O. D.
T
MALE STUD
THREAD
METRIC TAPER
B1
L1
L2
L3
S2
S3
6
8
10
12
15
18
6
8
10
12
14
16
M 10x1
M 12x1.5
M 14x1.5
M 16x1.5
M 18x1.5
M 22x1.5
M 12x1.5
M 14x1.5
M 16x1.5
M 18x1.5
M 20x1.5
M 22x1.5
8
12
12
12
14
17
14
12
12
12
14
17
27
29
30
32
36
40
31
32
34
38
40
43
12
14
15
17
21
23.5
16
17
17.5
21.5
22
24.5
20
26
27
28
34
36
26
27
28
28
32
32
14
17
19
22
27
32
17
19
22
24
27
30
12
12
14
17
19
24
12
14
17
19
19
24
Dimensions are in millimeters
Dimension L1 is approximate length with tightened nut.
The above part numbers are for complete fittings including Nut, Bite Ring and Body.
Only body without Nut and Bite Ring are available on request.
If you have requirements other than above size and Dimensions,
please contact us with complete details
Dimensions are for reference only and are subject to change without notice.
Suffixes the following material code along with above
part number while sending your enquiries / orders.
Material
Code
SS316L
SS304
EL
I
Example
WE-6L-2RT/EL
WE-6L-2RT/I
The material SS316Ti are available on request
34
MALE STUD ELBOW FITTINGS - WE
MALE STUD THREAD : NPT to ANSI B1.20.1
S3
S2
B1
L3
T
NPT
L2
L1
SERIES
L-Light
PN 315
PN160
S-Heavy
PN 630
PN 400
PN 315
TUBE
O. D.
T
MALE STUD
THREAD
NPT
B1
L1
L2
L3
S2
S3
6
8
10
12
15
18
22
28
35
42
6
8
10
12
14
16
20
25
30
38
1/8
1/4
1/4
3/8
1/2
1/2
3/4
1
1-1/4
1-1/2
1/4
1/4
3/8
3/8
1/2
1/2
3/4
1
1-1/4
1-1/2
9.7
14.3
14.3
14.3
19.0
19.0
19.0
24.0
25.0
26.0
14.3
14.3
14.3
14.3
19.0
19.0
19.0
24.0
25.0
26.0
27
29
30
32
36
40
44
47
56
63
31
32
34
38
40
43
48
54
62
72
12
14
15
17
21
23.5
27.5
30.5
34.5
40
16
17
17.5
21.5
2
24.5
26.5
30
35.5
41
20
26
27
28
34
36
42
48
54
61
26
27
28
28/
34
36
42
48
54
61
14
17
19
22
27
32
36
41
50
60
17
19
22
24
27
30
36
46
50
60
12
12
14
17
19
24
27
36
41
50
12
14
17
17
19
24
27
36
41
50
Dimensions are in millimeters
Dimension L1 is approximate length with tightened nut.
The above part numbers are for complete fittings including Nut, Bite Ring and Body.
Only body without Nut and Bite Ring are available on request.
If you have requirements other than above size and Dimensions,
please contact us with complete details
Dimensions are for reference only and are subject to change without notice.
SEALEXCEL
PART NO.
APPROX. WT.
Kg per 10 pcs.
WE-6L-2N
WE-8L-4N
WE-10L-4N
WE-12L-6N
WE-15L-8N
WE-18L-8N
WE-22L-12N
WE-28L-16N
WE-35L-20N
WE-42L-24N
WE-6S-4N
WE-8S-4N
WE-10S-6N
WE-12S-6N
WE-14S-8N
WE-16S-8N
WE-20S-12N
WE-25S-16N
WE-30S-20N
WE-38S-24N
0.40
0.63
0.81
1.15
1.33
1.79
2.61
4.09
6.19
9.18
0.73
0.95
1.30
1.59
1.57
2.07
3.19
6.04
8.38
12.3
Suffixes the following material code along with above
part number while sending your enquiries / orders.
Material
Code
SS316L
SS304
EL
I
Example
WE-6L-2N/EL
WE-6L-2N/I
The material SS316Ti are available on request
35
STRAIGHT FEMALE STUD FITTINGS - GAI
FEMALE THREAD : BSP ( Parallel/Taper)
S2
D2
BSP/BSPT
S1
T
B2
L2
L1
SERIES
L-Light
PN315
PN 160
S-Heavy
PN 630
PN 400
PN 315
TUBE
O. D.
T
FEMALE THREAD
BSP/BPT
6
8
8
8
10
10
10
12
12
15
18
22
28
35
42
6
8
10
12
14
16
20
25
30
38
1/8 BSP
1/4 BSP
3/8 BSPT
1/2 BSPT
1/4 BSP
3/8 BSPT
1/2 BSPT
3/8 BSP
1/2 BSP
1/2 BSP
1/2 BSP
3/4 BSP
1 BSP
1-1/4 BSP
1-1/2 BSP
1/4 BSP
1/4 BSP
3/8 BSP
3/8 BSP
1/2 BSP
1/2 BSP
3/4 BSP
1 BSP
1-1/4 BSP
1-1/2 BSP
Dimensions are in millimeters
B2
D2
L1
L2
S1
S2
12
17
17
20
17
17
20
17
20
20
20
22
24.5
26.5
28.5
17
17
17
17
20
20
22
24.5
26.5
28.5
4
6
6
6
8
8
8
10
10
12
15
19
24
30
36
4
5
7
8
10
12
16
20
25
32
34
39
40
44
40
41
45
41
45
46
47
52
55
63
65
41
41
43
43
50
50
56
62
69
74
19
24
25
29
25
26
30
26
30
31
30.5
35.5
38
41
42.5
26
26
26.5
26.5
32
31.5
34.5
37.5
42
43.5
14
19
24
27
19
24
27
24
27
27
27
36
41
55
60
19
19
24
24
30
30
36
41
55
60
14
17
17
17
19
19
19
22
22
27
32
36
41
50
60
17
19
22
24
27
30
36
46
50
60
RG : BSP Parallel thread, RT : BSP Taper Thread
Dimension L1 is approximate length with tightened nut.
The above part numbers are for complete fittings including Nut, Bite Ring and Body.
Only body without Nut and Bite Ring are available on request.
If you have requirements other than above size and Dimensions,
please contact us with complete details
Dimensions are for reference only and are subject to change without notice.
36
SEALEXCEL
PART NO.
APPROX. WT.
Kg per 10 pcs.
GAI-6L-2RG
GAI-8L-4RG
GAI-8L-6RT
GAI-8L-8RT
GAI-10L-4RG
GAI-10L-6RT
GAI-10L-8RT
GAI-12L-6RG
GAI-12L-8RG
GAI-15L-8RG
GAI-18L-8RG
GAI-22L-12RG
GAI-28L-16RG
GAI-35L-20RG
GAI-42L-24RG
GAI-6S-4RG
GAI-8S-4RG
GAI-10S-6RG
GAI-12S-6RG
GAI-14S-8RG
GAI-16S-8RG
GAI-20S-12RG
GAI-25S-16RG
GAI-30S-20RG
GAI-38S-24RG
0.29
0.55
0.77
0.96
0.60
0.83
1.00
0.91
1.06
1.31
1.52
2.59
3.11
6.11
7.53
0.60
0.66
1.00
1.08
1.79
1.96
2.97
4.65
7.43
9.54
Suffixes the following material code along with above
part number while sending your enquiries / orders.
Material
Code
SS316L
SS304
EL
I
Example
GAI-6L-2RG/EL
GAI-6L-2RG/I
The material SS316Ti are available on request
STRAIGHT FEMALE STUD FITTINGS - GAI
FEMALE THREAD : Metric ( Parallel)
S2
D2
Metric
S1
T
B2
L2
L1
SERIES
L-Light
PN315
PN160
S-Heavy
PN 630
PN 400
PN 315
TUBE
O. D.
T
FEMALE
THREAD
METRIC
B2
D2
L1
L2
S1
S2
6
8
10
12
15
18
22
28
35
42
6
8
10
12
14
16
20
25
30
38
M 10x1
M 12x1.5
M 14x1.5
M 16x1.5
M 18x1.5
M 22x1.5
M 26x1.5
M 33x2
M 42x2
M 48x2
M 12x1.5
M 14x1.5
M 16x1.5
M 18x1.5
M 20x1.5
M 22x1.5
M 27x2
M 33x2
M 42x2
M 48x2
12.5
17
17
17
17
19
21
24
26
28
17
17
17
17
19
19
22
24
26
28
4
6
8
10
12
15
19
24
30
36
4
5
7
8
10
12
16
20
25
32
34
39
40
41
43
46
51
54
62
65
41
41
43
44
49
49
56
61
68
74
19.5
24
25
26
28
29.5
34.5
37.5
40.5
42
26
26
26.5
27.5
31
30.5
34.5
37
41.5
43
14
17
19
22
24
30
32
41
55
60
17
19
22
24
27
30
36
41
55
60
14
17
19
22
27
32
36
41
50
60
17
19
22
24
27
30
36
46
50
60
Dimensions are in millimeters
Dimension L1 is approximate length with tightened nut.
The above part numbers are for complete fittings including Nut, Bite Ring and Body.
Only body without Nut and Bite Ring are available on request.
If you have requirements other than above size and Dimensions,
please contact us with complete details
Dimensions are for reference only and are subject to change without notice.
SEALEXCEL
PART NO.
APPROX. WT.
Kg per 10 pcs.
GAI-6L-10M
GAI-8L-12M
GAI-10L-14M
GAI-12L-16M
GAI-15L-18M
GAI-18L-22M
GAI-22L-26M
GAI-28L-33M
GAI-35L-42M
GAI-42L-48M
GAI-6S-12M
GAI-8S-14M
GAI-10S-16M
GAI-12S-18M
GAI-14S-20M
GAI-16S-22M
GAI-20S-27M
GAI-25S-33M
GAI-30S-42M
GAI-38S-48M
0.29
0.47
0.59
0.79
1.12
1.74
2.09
3.12
5.79
7.60
0.53
0.64
0.90
1.06
1.49
1.83
2.99
4.55
7.30
9.38
Suffixes the following material code along with above
part number while sending your enquiries / orders.
Material
Code
SS316L
SS304
EL
I
Example
GAI-6L-10M/EL
GAI-6L-10M/I
The material SS316Ti are available on request
37
PRESSURE GAUGE FITTINGS - MAV
FEMALE THREAD : BSP (Parallel with DK Seal Ring)
S1
T
DK Seal
H
L3
BSP
D2
S2
B2
L1
SERIES
L-Light
PN315
S-Heavy
PN 630
TUBE
O. D.
T
FEMALE
THREAD
BSP
B2
D2
H
L1
L3
S1
S2
6
8
10
12
6
8
10
12
1/4
1/4
1/4
1/4
1/2
1/2
1/2
1/2
14.5
14.5
14.5
14.5
20
20
20
20
2.5
5.5
5.5
5.5
3.5
3.5
7.0
7.0
4.5
4.5
4.5
4.5
5
5
5
5
37
37
38
38
46
46
47
47
7.5
7.5
8.5
8.5
11
11
10.5
10.5
19
19
19
19
27
27
27
27
14
17
19
22
14
17
19
22
Dimensions are in millimeters
Dimension L1 is approximate length with tightened nut.
The above part numbers are for complete fittings including Nut, Bite Ring and Body.
Only body without Nut and Bite Ring are available on request.
If you have requirements other than above size and Dimensions,
please contact us with complete details
Dimensions are for reference only and are subject to change without notice.
SEALEXCEL
PART NO.
APPROX. WT.
Kg per 10 pcs.
MAV-6L-4RG
MAV-8L-4RG
MAV-10L-4RG
MAV-12L-4RG
MAV-6S-8RG
MAV-8S-8RG
MAV-10S-8RG
MAV-12S-8RG
0.48
0.54
0.60
0.69
1.04
1.11
1.20
1.28
Suffixes the following material code along with above
part number while sending your enquiries / orders.
Material
Code
SS316L
SS304
EL
I
Example
MAV-6L-4RG/EL
MAV-6L-4RG/I
The material SS316Ti are available on request
38
PRESSURE GAUGE FITTINGS WITH SWIVEL NUT - MAVE
FEMALE THREAD : BSP (Parallel with DK Seal Ring)
O-Ring
BSP
D2
S1
T
M
S2
DK Seal
H
B2
L1
SERIES
L-Light
PN315
S-Heavy
PN 630
TUBE
O. D.
T
FEMALE
THREAD
BSP
M
6
8
10
12
6
8
10
12
6
8
10
12
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/2
1/2
1/2
1/2
M 12 x 1.5
M 14 x 1.5
M 16 x 1.5
M 18 x 1.5
M 14 x 1.5
M 16 x 1.5
M 18 x 1.5
M 20 x 1.5
M 14 x 1.5
M 16 x 1.5
M 18 x 1.5
M 20 x 1.5
Dimensions are in millimeters
B2
14.5
14.5
14.5
14.5
14.5
14.5
14.5
14.5
20
20
20
20
O-RIng : Buna-N is Standard
â
Viton are available on request
For Viton: Suffix code 'V' alongwiththe part number of the fittings
Example : MAVE-6L-4RG/ELV
Dimension L1 is approximate length with tightened nut.
If you have requirements other than above size and Dimensions,
please contact us with complete details
Dimensions are for reference only and are subject to change without notice.
D2
H
L1
S1
S2
2.5
4
5.5
5.5
2.5
4
6
7
2.5
4
6
7
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
5
5
5
5
35.5
35.5
36
36
35.5
35.5
36
39
42.5
43
43.5
45
19
19
19
19
19
19
19
19
27
27
27
27
14
17
19
22
17
19
22
24
17
19
22
24
SEALEXCEL
PART NO.
APPROX. WT.
Kg per 10 pcs.
MAVE-6L-4RG
MAVE-8L-4RG
MAVE-10L-4RG
MAVE-12L-4RG
MAVE-6S-4RG
MAVE-8S-4RG
MAVE-10S-4RG
MAVE-12S-4RG
MAVE-6S-8RG
MAVE-8S-8RG
MAVE-10S-8RG
MAVE-12S-8RG
0.11
0.16
0.19
0.25
0.16
0.19
0.25
0.34
0.19
0.21
0.28
0.37
Suffixes the following material code along with above
part number while sending your enquiries / orders.
Material
Code
SS316L
SS304
EL
I
Example
MAVE-6L-4RG/EL
MAVE-6L-4RG/I
The material SS316Ti are available on request
39
REDUCING TUBE ADAPTOR WITH SWIVEL NUT-RED
SERIES : L-Light
S1
S3
T2
T1
M
S2
O-Ring
O-Ring : Buna-N is standard
Vitonâ are available on request
For Viton: Suffix code 'V' alongwith
the part number of the fittings
Example : RED-8L-6L/ELV
L3
L1
SERIES
L-LIGHT
PN 315
PN 315
PN 315
PN 315
PN 315
PN 160
PN 160
PN 160
PN 160
TUBE
O. D.
T1
T2
8
10
10
12
12
12
15
15
15
15
18
18
18
18
18
22
22
22
22
22
22
28
28
28
28
28
28
28
35
35
35
35
35
35
35
35
42
42
42
42
42
42
42
42
42
6
6
8
6
8
10
6
8
10
12
6
8
10
12
15
6
8
10
12
15
18
6
8
10
12
15
18
22
6
8
10
12
15
18
22
28
6
8
10
12
15
18
22
28
35
Dimensions are in millimeters
M
M14x1.5
M16x1.5
M16x1.5
M18x1.5
M18x1.5
M18x1.5
M22x1.5
M22x1.5
M22x1.5
M22x1.5
M26x1.5
M26x1.5
M26x1.5
M26x1.5
M26x1.5
M30x2
M30x2
M30x2
M30x2
M30x2
M30x2
M36x2
M36x2
M36x2
M36x2
M36x2
M36x2
M36x2
M45x2
M45x2
M45x2
M45x2
M45x2
M45x2
M45x2
M45x2
M52x2
M52x2
M52x2
M52x2
M52x2
M52x2
M52x2
M52x2
M52x2
L1
L3
S1
S2
S3
38
40
40
40
40
41
43
43
44
44
43
43
44
44
45
47
47
48
48
49
50
49
49
50
50
51
52
54
52
52
53
53
54
55
57
57
55
55
56
56
58
58
60
61
65
23.5
25
25
25
25
26
28.5
28.5
29.5
29.5
28
28
29
29
30
32
32
33
33
34
33.5
34
34
35
35
36
35.5
37.5
37
37
38
38
39
38.5
40.5
40.5
40.5
40.5
41.5
41.5
42.5
42
44
44
43
12
14
14
17
17
17
19
19
19
19
24
24
24
24
24
27
27
27
27
27
27
32
32
32
32
32
32
32
41
41
41
41
41
41
41
41
50
50
50
50
50
50
50
50
50
17
19
19
22
22
22
27
27
27
27
32
32
32
32
32
36
36
36
36
36
36
41
41
41
41
41
41
41
50
50
50
50
50
50
50
50
60
60
60
60
60
60
60
60
60
14
14
17
14
17
19
14
17
19
22
14
17
19
22
27
14
17
19
22
27
32
14
17
19
22
27
32
36
14
17
19
22
27
32
36
41
14
17
19
22
27
32
36
41
50
Dimension L1 & L3 is approximate length with tightened nut.
The above part numbers are for complete fittings including Nut, Bite Ring and Body.
Only body without Nut and Bite Ring are available on request.
If you have requirements other than above size and Dimensions,
please contact us with complete details
Dimensions are for reference only and are subject to change without notice.
O-RINGS
SEALEXCEL
PART NO.
APPROX. WT.
Kg per 10 pcs.
6 x 1.5
7.5 x 1.5
7.5 x 1.5
9 x 1.5
9 x 1.5
9 x 1.5
12 x 2
12 x 2
12 x 2
12 x 2
15 x 2
15 x 2
15 x 2
15 x 2
15 x 2
20 x 2
20 x 2
20 x 2
20 x 2
20 x 2
20 x 2
26 x 2
26 x 2
26 x 2
26 x 2
26 x 2
26 x 2
26 x 2
32 x 2.5
32 x 2.5
32 x 2.5
32 x 2.5
32 x 2.5
32 x 2.5
32 x 2.5
32 x 2.5
38 x 2.5
38 x 2.5
38 x 2.5
38 x 2.5
38 x 2.5
38 x 2.5
38 x 2.5
38 x 2.5
38 x 2.5
RED-8L-6L
RED-10L-6L
RED-10L-8L
RED-12L-6L
RED-12L-8L
RED-12L-10L
RED-15L-6L
RED-15L-8L
RED-15L-10L
RED-15L-12L
RED-18L-6L
RED-18L-8L
RED-18L-10L
RED-18L-12L
RED-18L-15L
RED-22L-6L
RED-22L-8L
RED-22L-10L
RED-22L-12L
RED-22L-15L
RED-22L-18L
RED-28L-6L
RED-28L-8L
RED-28L-10L
RED-28L-12L
RED-28L-15L
RED-28L-18L
RED-28L-22L
RED-35L-6L
RED-35L-8L
RED-35L-10L
RED-35L-12L
RED-35L-15L
RED-35L-18L
RED-35L-22L
RED-35L-28L
RED-42L-6L
RED-42L-8L
RED-42L-10L
RED-42L-12L
RED-42L-15L
RED-42L-18L
RED-42L-22L
RED-42L-28L
RED-42L-35L
0.39
0.49
0.53
0.63
0.68
0.70
0.55
0.98
1.07
1.10
1.19
1.24
1.28
1.72
1.90
1.69
1.76
1.78
1.86
2.08
2.44
2.93
2.93
2.99
3.08
3.30
3.83
3.91
3.32
3.37
3.42
3.53
3.71
3.91
4.16
4.26
5.12
5.18
5.23
5.34
5.51
6.07
6.65
6.80
6.95
Suffixes the following material code along with above
part number while sending your enquiries / orders.
Material
Code
SS316L
SS304
EL
I
Example
RED-8L-6L/EL
RED-8L-6L/I
The material SS316Ti are available on request
40
REDUCING TUBE ADAPTOR WITH SWIVEL NUT-RED
SERIES : S-Heavy
S1
S3
T2
T1
M
S2
O-Ring
O-Ring : Buna-N is standard
Vitonâ O-Ring are available on request
For Viton: Suffix code 'V' alongwith
the part number of the fittings
Example : RED-8S-6S/ELV
L3
L1
SERIES
S-HEAVY
PN 630
PN 630
PN 630
PN 630
PN 400
PN 400
PN 400
PN 400
PN 315
TUBE
O. D.
T1
T2
8
10
10
12
12
12
14
14
14
14
16
16
16
16
16
20
20
20
20
20
20
25
25
25
25
25
25
25
30
30
30
30
30
30
30
30
38
38
38
38
38
38
38
38
38
6
6
8
6
8
10
6
8
10
12
6
8
10
12
14
6
8
10
12
14
16
6
8
10
12
14
16
20
6
8
10
12
14
16
20
25
6
8
10
12
14
16
20
25
30
Dimensions are in millimeters
M
M16x1.5
M18x1.5
M18x1.5
M20x1.5
M20x1.5
M20x1.5
M22x1.5
M22x1.5
M22x1.5
M22x1.5
M24x1.5
M24x1.5
M24x1.5
M24x1.5
M24x1.5
M30x2
M30x2
M30x2
M30x2
M30x2
M30x2
M36x2
M36x2
M36x2
M36x2
M36x2
M36x2
M36x2
M42x2
M42x2
M42x2
M42x2
M42x2
M42x2
M42x2
M42x2
M52x2
M52x2
M52x2
M52x2
M52x2
M52x2
M52x2
M52x2
M52x2
L1
L3
S1
S2
S3
42
42
42
44
44
46
46
46
47
47
47
47
48
48
51
51
51
52
52
55
55
53
53
54
54
57
57
61
59
59
60
60
63
63
66
69
62
62
63
63
66
66
70
73
76
27
27.5
27.5
29
29
29.5
31.5
31.5
31
31
32
32
31.5
31.5
33
36
36
35.5
35.5
37
36.5
38.5
38.5
38
38
39.5
39
39
44
44
43.5
43.5
45
44.5
44.5
45
47.5
47.5
47
47
48.5
48
48
48.5
49
14
17
17
17
17
19
19
19
19
22
22
22
22
22
24
27
27
27
27
27
27
32
32
32
32
32
32
32
41
41
41
41
41
41
41
41
50
50
50
50
50
50
50
50
50
19
22
22
24
24
24
27
27
27
27
30
30
30
30
30
36
36
36
36
36
36
46
46
46
46
46
46
46
50
50
50
50
50
50
50
50
60
60
60
60
60
60
60
60
60
17
17
19
17
19
22
17
19
22
24
17
19
22
24
27
17
19
22
24
27
30
17
19
22
24
27
30
36
17
19
22
24
27
30
36
46
17
19
22
24
27
30
36
46
50
Dimension L1 & L3 is approximate length with tightened nut.
The above part numbers are for complete fittings including Nut, Bite Ring and Body.
Only body without Nut and Bite Ring are available on request.
If you have requirements other than above size and Dimensions,
please contact us with complete details
Dimensions are for reference only and are subject to change without notice.
O-RINGS
SEALEXCEL
PART NO.
APPROX. WT.
Kg per 10 pcs.
6 x 1.5
7.5 x 1.5
7.5 x 1.5
9 x 1.5
9 x 1.5
9 x 1.5
10 x 2
10 x 2
10 x 2
10 x 2
12 x 2
12 x 2
12 x 2
12 x 2
12 x 2
16.3 x 2.4
16.3 x 2.4
16.3 x 2.4
16.3 x 2.4
16.3 x 2.4
16.3 x 2.4
20.3 x 2.4
20.3 x 2.4
20.3 x 2.4
20.3 x 2.4
20.3 x 2.4
20.3 x 2.4
20.3 x 2.4
25.3 x 2.4
25.3 x 2.4
25.3 x 2.4
25.3 x 2.4
25.3 x 2.4
25.3 x 2.4
25.3 x 2.4
25.3 x 2.4
33.3 x 2.4
33.3 x 2.4
33.3 x 2.4
33.3 x 2.4
33.3 x 2.4
33.3 x 2.4
33.3 x 2.4
33.3 x 2.4
33.3 x 2.4
RED-8S-6S
RED-10S-6S
RED-10S-8S
RED-12S-6S
RED-12S-8S
RED-12S-10S
RED-14S-6S
RED-14S-8S
RED-14S-10S
RED-14S-12S
RED-16S-6S
RED-16S-8S
RED-16S-10S
RED-16S-12S
RED-16S-14S
RED-20S-6S
RED-20S-8S
RED-20S-10S
RED-20S-12S
RED-20S-14S
RED-20S-16S
RED-25S-6S
RED-25S-8S
RED-25S-10S
RED-25S-12S
RED-25S-14S
RED-25S-16S
RED-25S-20S
RED-30S-6S
RED-30S-8S
RED-30S-10S
RED-30S-12S
RED-30S-14S
RED-30S-16S
RED-30S-20S
RED-30S-25S
RED-38S-6S
RED-38S-8S
RED-38S-10S
RED-38S-12S
RED-38S-14S
RED-38S-16S
RED-38S-20S
RED-38S-25S
RED-38S-30S
0.34
0.72
0.78
0.83
0.93
1.07
0.92
0.99
1.10
1.19
1.27
1.48
1.48
1.55
1.63
1.89
2.05
2.06
2.13
2.32
2.59
3.08
3.19
3.32
3.34
3.51
3.73
4.36
4.29
4.31
4.36
4.43
4.61
4.87
5.36
6.73
7.08
7.10
7.14
7.20
7.43
7.70
8.12
8.50
8.78
Suffixes the following material code along with above
part number while sending your enquiries / orders.
Material
Example
Code
RED-8S-6S/EL
SS316L
EL
SS304
RED-8S-6S/I
I
The material SS316Ti are available on request
41
REDUCING STANDPIPE FITTINGS - KOR
SERIES : L-Light
S3
S1
S2
M
T1
T2
Pre-installed connection for existing cone
Final Assembly : in appropriate Body
with at least ½ turn beyond the point of
clearly perceptible resistance
L3
L1
SERIES
L-LIGHT
PN 315
PN 315
PN 315
PN 315
PN 315
PN 160
PN 160
PN 160
PN 160
TUBE
O. D.
Dimensions are in millimeters
M
T1
T2
8
10
10
12
12
12
15
15
15
15
18
18
18
18
18
22
22
22
22
22
22
28
28
28
28
28
28
28
35
35
35
35
35
35
35
35
42
42
42
42
42
42
42
6
6
8
6
8
10
6
8
10
12
6
8
10
12
15
6
8
10
12
15
18
6
8
10
12
15
18
22
6
8
10
12
15
18
22
28
10
12
15
18
22
28
35
M 14x1.5
M 16x1.5
M 16x1.5
M 18x1.5
M 18x1.5
M 18x1.5
M 22x1.5
M 22x1.5
M 22x1.5
M 22x1.5
M 26x1.5
M 26x1.5
M 26x1.5
M 26x1.5
M 26x1.5
M 30x2
M 30x2
M 30x2
M 30x2
M 30x2
M 30x2
M 36x2
M 36x2
M 36x2
M 36x2
M 36x2
M 36x2
M 36x2
M 45x2
M 45x2
M 45x2
M 45x2
M 45x2
M 45x2
M 45x2
M 45x2
M 52x2
M 52x2
M 52x2
M 52x2
M 52x2
M 52x2
M 52x2
L1
L3
S1
S2
S3
43
43
43
44
44
45
44
44
45
45
46
46
47
47
49
47
47
48
48
50
50
49
49
50
50
52
52
54
55
55
56
56
58
58
60
61
57
57
59
59
61
62
66
28.5
28.5
28.5
29.5
29.5
30.5
29.5
29.5
30.5
30.5
31.5
31.5
32.5
32.5
33.5
32.5
32.5
33.5
33.5
34.5
34.0
34.5
34.5
35.5
35.5
36.5
36.0
38.0
40.5
40.5
41.5
41.5
42.5
42.0
44.0
44.0
42.5
42.5
43.5
43.0
45.0
45.0
44.0
14
14
14
16
14
17
16
16
17
19
19
19
19
19
24
24
24
24
24
24
27
30
30
30
30
30
30
32
36
36
36
36
36
36
36
38
46
46
46
46
46
46
46
17
19
19
22
22
22
27
27
27
27
32
32
32
32
32
36
36
36
36
36
36
41
41
41
41
41
41
41
50
50
50
50
50
50
50
50
60
60
60
60
60
60
60
14
14
17
14
17
19
14
17
19
22
14
17
19
22
27
14
17
19
22
27
32
14
17
19
22
27
32
36
14
17
19
22
27
32
36
41
19
22
27
32
36
41
50
Dimension L1 is approximate length with tightened nut.
The above part numbers are for complete fittings including Nut, Bite Ring and Body.
Only body without Nut and Bite Ring are available on request.
If you have requirements other than above size and Dimensions,
please contact us with complete details
Dimensions are for reference only and are subject to change without notice.
42
SEALEXCEL
PART NO.
APPROX. WT.
Kg per 10 pcs.
KOR-8L-6L
KOR-10L-6L
KOR-10L-8L
KOR-12L-6L
KOR-12L-8L
KOR-12L-10L
KOR-15L-6L
KOR-15L-8L
KOR-15L-10L
KOR-15L-12L
KOR-18L-6L
KOR-18L-8L
KOR-18L-10L
KOR-18L-12L
KOR-18L-15L
KOR-22L-6L
KOR-22L-8L
KOR-22L-10L
KOR-22L-12L
KOR-22L-15L
KOR-22L-18L
KOR-28L-6L
KOR-28L-8L
KOR-28L-10L
KOR-28L-12L
KOR-28L-15L
KOR-28L-18L
KOR-28L-22L
KOR-35L-6L
KOR-35L-8L
KOR-35L-10L
KOR-35L-12L
KOR-35L-15L
KOR-35L-18L
KOR-35L-22L
KOR-35L-28L
KOR-42L-10L
KOR-42L-12L
KOR-42L-15L
KOR-42L-18L
KOR-42L-22L
KOR-42L-28L
KOR-42L-35L
0.38
0.44
0.50
0.54
0.60
0.65
0.77
0.83
0.88
0.95
1.09
1.14
1.17
1.24
1.46
1.44
1.49
1.55
1.62
1.83
2.06
1.90
1.97
2.02
2.09
2.31
2.50
2.76
3.12
3.21
3.23
3.30
3.50
3.78
3.95
4.04
4.65
4.65
4.81
5.12
5.33
5.43
5.97
Suffixes the following material code along with above
part number while sending your enquiries / orders.
Material
Example
KOR-8L-6L/EL
SS316L
EL
SS304
KOR-8L-6L/I
I
The material SS316Ti are available on request
Code
REDUCING STANDPIPE FITTINGS - KOR
SERIES : S-Heavy
S3
S2
S1
M
T1
D2
Pre-installed connection for existing cone
Final Assembly : in appropriate Body
with at least ½ turn beyond the point of
clearly perceptible resistance
L3
L1
SERIES
S-HEAVY
PN 630
PN 630
PN 630
PN 630
PN 400
PN 400
PN 400
PN 400
PN 315
TUBE
O. D.
T1
T2
8
10
10
12
12
12
14
14
14
14
16
16
16
16
16
20
20
20
20
20
20
25
25
25
25
25
25
25
30
30
30
30
30
30
30
30
38
38
38
38
38
38
38
38
38
6
6
8
6
8
10
6
8
10
12
6
8
10
12
14
6
8
10
12
14
16
6
8
10
12
14
16
20
6
8
10
12
14
16
20
25
6
8
10
12
14
16
20
25
30
Dimensions are in millimeters
M
M 16x1.5
M 18x1.5
M 18x1.5
M 20x1.5
M 20x1.5
M 20x1.5
M 22x1.5
M 22x1.5
M 22x1.5
M 22x1.5
M 24x1.5
M 24x1.5
M 24x1.5
M 24x1.5
M 24x1.5
M 30x2
M 30x2
M 30x2
M 30x2
M 30x2
M 30x2
M 36x2
M 36x2
M 36x2
M 36x2
M 36x2
M 36x2
M 36x2
M 42x2
M 42x2
M 42x2
M 42x2
M 42x2
M 42x2
M 42x2
M 42x2
M 52x2
M 52x2
M 52x2
M 52x2
M 52x2
M 52x2
M 52x2
M 52x2
M 52x2
L1
L3
S1
S2
S3
48
49
49
52
52
53
54
54
55
55
54
54
55
55
58
61
61
62
62
65
65
66
66
67
67
69
69
73
68
68
69
69
72
72
75
78
73
73
74
74
77
77
80
83
86
33
34
34
37
37
36.5
39
39
38.5
38.5
39
39
38.5
38.5
40
46
46
45.5
47
47
46.5
51
51
50.5
50.5
51
50.5
51.5
53
53
52.5
52.5
54
53.5
53.5
54
58
58
57.5
57.5
59
58.5
58.5
59
59.5
16
16
17
17
17
19
19
19
19
22
22
22
22
22
24
24
24
24
24
24
27
27
27
27
27
27
27
32
32
32
32
32
32
32
32
38
41
41
41
41
41
41
41
41
46
19
22
22
24
24
24
27
27
27
27
30
30
30
30
30
36
36
36
36
36
36
46
46
46
46
46
46
46
50
50
50
50
50
50
50
50
60
60
60
60
60
60
60
60
60
17
17
19
17
19
22
17
19
22
24
17
19
22
24
27
17
19
22
24
27
30
17
19
22
24
27
30
36
17
19
22
24
27
30
36
46
17
19
22
24
27
30
36
46
50
Dimension L1 is approximate length with tightened nut.
The above part numbers are for complete fittings including Nut, Bite Ring and Body.
Only body without Nut and Bite Ring are available on request.
If you have requirements other than above size and Dimensions,
please contact us with complete details
Dimensions are for reference only and are subject to change without notice.
SEALEXCEL
PART NO.
APPROX. WT.
Kg per 10 pcs.
KOR-8S-6S
KOR-10S-6S
KOR-10S-8S
KOR-12S-6S
KOR-12S-8S
KOR-12S-10S
KOR-14S-6S
KOR-14S-8SS
KOR-14S-10S
KOR-14S-12S
KOR-16S-6S
KOR-16S-8S
KOR-16S-10S
KOR-16S-12S
KOR-16S-14S
KOR-20S-6S
KOR-20S-8S
KOR-20S-10S
KOR-20S-12S
KOR-20S-14S
KOR-20S-16S
KOR-25S-6S
KOR-25S-8S
KOR-25S-10S
KOR-25S-12S
KOR-25S-14S
KOR-25S-16S
KOR-25S-20S
KOR-30S-6S
KOR-30S-8S
KOR-30S-10S
KOR-30S-12S
KOR-30S-14S
KOR-30S-16S
KOR-30S-20S
KOR-30S-25S
KOR-38S-6S
KOR-38S-8S
KOR-38S-10S
KOR-38S-12S
KOR-38S-14S
KOR-38S-16S
KOR-38S-20S
KOR-38S-25S
KOR-38S-30S
0.54
0.68
0.75
0.78
0.83
0.94
1.02
1.07
1.19
1.25
1.22
1.28
1.44
1.49
1.68
1.89
1.95
2.06
2.12
2.30
2.48
3.27
3.36
3.49
3.57
3.69
3.88
4.42
3.94
4.00
4.00
4.17
4.32
4.54
5.00
6.29
5.68
5.68
5.83
5.88
5.94
6.30
6.83
8.05
8.36
Suffixes the following material code along with above
part number while sending your enquiries / orders.
Material
Code
Example
SS316L
SS304
EL
I
KOR-8S-6S/EL
KOR-8S-6S/I
The material SS316Ti are available on request
43
STRAIGHT STUD STANDPIPES-EVGER
(FOR ADAPTIONS) MALE STUD THREAD : BSP (parallel with ED sealing)
S1
ED Seal
S2
B1
SERIES
L-Light
PN315
PN160
S-Heavy
PN 630
PN 400
PN 315
TUBE
O. D.
T
MALE STUD
THREAD
BSP
M
6
8
10
12
15
18
22
28
35
42
6
8
10
12
12
14
16
16
20
25
30
38
1/8
1/4
1/4
3/8
1/2
1/2
3/4
1
1-1/4
1-1/2
1/4
1/4
3/8
3/8
1/2
1/2
1/2
3/4
3/4
1
1-1/4
1-1/2
M 12x1.5
M 14x1.5
M 16x1.5
M 18x1.5
M 22x1.5
M 26x1.5
M 30x2
M 36x2
M 45x2
M 52x2
M 14x1.5
M 16x1.5
M 18x1.5
M 20x1.5
M 20x1.5
M 22x1.5
M 24x1.5
M 24x1.5
M 30x2
M 36x2
M 42x2
M 52x2
L5
Dimensions are in millimeters
B1
D1
L5
S1
S2
8
12
12
12
14
14
16
18
20
22
12
12
12
12
14
14
14
16
16
18
20
22
14
19
19
22
27
27
32
40
50
55
19
19
22
22
27
27
27
32
32
40
50
55
24.5
29.5
27.5
34
31
31.5
32.5
35
42.5
46.5
27
29.5
32
34
34.5
36.5
37
39
43
48
51
60
14
19
19
22
27
27
32
41
50
55
19
19
22
22
27
27
27
32
32
41
50
55
14
17
19
22
27
32
36
41
50
60
17
19
22
24
24
27
30
30
36
46
50
60
ED Seal : Buna-N is standard
â
Viton are available on request
For Viton: Suffix code 'V' alongwith the part number of the fittings
Example : EVGER-6L-2GED/ELV
The above part numbers are for complete fittings including Nut, Bite Ring and Body.
Only body without Nut and Bite Ring are available on request.
If you have requirements other than above size and Dimensions,
please contact us with complete details
Dimensions are for reference only and are subject to change without notice.
44
M
T
BSP
Final Assembly (in appropriate Body)
at least ½ turn beyond the point of
clearly perceptible resistance
D1
Pre-installed Nut & Bite Ring for
connection with existing cone
SEALEXCEL
PART NO.
APPROX. WT.
Kg per 10 pcs.
EVGER-6L-2GED
EVGER-8L-4GED
EVGER-10L-4GED
EVGER-12L-6GED
EVGER-15L-8GED
EVGER-18L-8GED
EVGER-22L-12GED
EVGER-28L-16GED
EVGER-35L-20GED
EVGER-42L-24GED
EVGER-6S-4GED
EVGER-8S-4GED
EVGER-10S-6GED
EVGER-12S-6GED
EVGER-12S-8GED
EVGER-14S-8GED
EVGER-16S-8GED
EVGER-16S-12GED
EVGER-20S-12GED
EVGER-25S-16GED
EVGER-30S-20GED
EVGER-38S-24GED
0.23
0.51
0.46
0.85
1.12
1.29
1.79
2.64
4.35
6.14
0.47
0.56
0.82
0.94
1.29
1.45
1.57
2.20
2.50
4.89
6.64
9.42
Suffixes the following material code along with above
part number while sending your enquiries / orders.
Material
Code
SS316L
SS304
EL
I
Example
EVGER-6L-2GED/EL
EVGER-6L-2GED/I
The material SS316Ti are available on request
STRAIGHT STUD STANDPIPES-EVGE-M
(FOR ADAPTIONS) MALE STUD THREAD : Metric (Parallel with ED sealing)
T
Metric
Final Assembly (in appropriate Body)
at least ½ turn beyond the point of
clearly perceptible resistance
D1
Pre-installed Nut & Bite Ring for
connection with existing cone
B1
SERIES
L-Light
PN 315
PN160
S-Heavy
PN 630
PN 315
S2
TUBE
O. D.
T
MALE STUD
THREAD
METRIC
M
6
8
10
12
15
18
22
28
35
42
6
8
10
12
14
16
20
25
30
38
M 10x1
M 12x1.5
M 14x1.5
M 16x1.5
M 18x1.5
M 22x1.5
M 26x1.5
M 33x2
M 42x2
M 48x2
M 12x1.5
M 14x1.5
M 16x1.5
M 18x1.5
M 20x1.5
M 22x1.5
M 27x2
M 33x2
M 42x2
M 48x2
M 12x1.5
M 14x1.5
M 16x1.5
M 18x1.5
M 22x1.5
M 26x1.5
M 30x2
M 36x2
M 45x2
M 52x2
M 14x1.5
M 16x1.5
M 18x1.5
M 20x1.5
M 22x1.5
M 24x1.5
M 30x2
M 36x2
M 42x2
M 52x2
M
S1
ED Seal
L5
Dimensions are in millimeters
B1
D1
L5
S1
S2
8
12
12
12
12
14
16
18
20
22
12
12
12
12
14
14
16
18
20
22
14
17
19
22
24
27
32
40
50
55
17
19
22
24
26
27
32
40
50
55
24.5
26.5
27.5
30
30.5
31.5
32.5
35
42.5
46.5
27
29.5
32
34
36.5
37
43
48
51
60
14
17
19
22
24
27
32
41
50
55
17
19
22
24
27
27
32
41
50
55
14
17
19
22
27
32
36
41
50
60
17
19
22
24
27
30
36
46
50
60
ED Seal : Buna-N is standard
â
Viton are available on request
For Viton: Suffix code 'V' alongwith the part number of the fittings
Example : EVGEM-6L-10MED/ELV
The above part numbers are for complete fittings including Nut, Bite Ring and Body.
Only body without Nut and Bite Ring are available on request.
If you have requirements other than above size and Dimensions,
please contact us with complete details
Dimensions are for reference only and are subject to change without notice.
SEALEXCEL
PART NO.
APPROX. WT.
Kg per 10 pcs.
EVGEM-6L-10MED
EVGEM-8L-12MED
EVGEM-10L-14MED
EVGEM-12L-16MED
EVGEM-15L-18MED
EVGEM-18L-22MED
EVGEM-22L-26MED
EVGEM-28L-33MED
EVGEM-35L-42MED
EVGEM-42L-48MED
EVGEM-6S-12MED
EVGEM-8S-14MED
EVGEM-10S-16MED
EVGEM-12S-18MED
EVGEM-14S-20MED
EVGEM-16S-22MED
EVGEM-20S-27MED
EVGEM-25S-33MED
EVGEM-30S-42MED
EVGEM-38S-48MED
0.23
0.37
0.48
0.65
0.92
1.32
1.79
2.65
4.42
6.13
0.41
0.57
0.81
1.03
1.41
1.60
2.50
4.97
6.57
9.42
Suffixes the following material code along with above
part number while sending your enquiries / orders.
Material
SS316L
SS304
Code
Example
EVGEM-6L-10MED/EL
EVGEM-6L-10MED/I
EL
I
The material SS316Ti are available on request
45
STRAIGHT STUD ADAPTER WITH SWIVEL NUT-EGER
MALE STUD THREAD : BSP (Parallel with ED sealing)
M
T
BSP
D1
S2
S1
ED Seal
O-Ring
L1
B1
SERIES
L-Light
PN 315
PN 160
S-Heavy
PN 630
PN 400
PN 315
Dimensions are in millimeters
TUBE
O. D.
T
MALE STUD
THREAD
BSP
M
6
8
10
12
15
18
22
28
35
42
6
8
10
12
14
16
20
25
30
38
1/8
1/4
1/4
3/8
1/2
1/2
3/4
1
1-1/4
1-1/2
1/4
1/4
3/8
3/8
1/2
1/2
3/4
1
1-1/4
1-1/2
M12x1.5
M14x1.5
M16x1.5
M18x1.5
M22x1.5
M26x1.5
M30x2
M36x2
M45x2
M52x2
M14x1.5
M16x1.5
M18x1.5
M20x1.5
M22x1.5
M24x1.5
M30x2
M36x2
M42x2
M52x2
B1
D1
L1
S1
S2
8
12
12
12
14
14
16
18
20
22
12
12
12
12
14
14
16
18
20
22
14
19
19
22
27
27
32
41
50
55
19
19
22
22
27
27
32
40
50
55
24.5
29.5
27.5
34
32
31.5
32.5
35
42.5
46.5
27
29.5
32
34
36.5
37
43
48
51
60
14
19
19
22
27
27
32
41
50
55
19
19
22
24
27
27
32
41
50
55
14
17
19
22
27
32
36
41
50
60
17
19
22
24
27
30
36
46
50
60
ED Seal/O-Ring : Buna-N is standard
â
Viton are available on request
For Viton: Suffix code 'V' alongwith the part number of the fittings
Example : EGER-6L-2GED/ELV
Dimension L1 is approximate length with tightened nut.
The above part numbers are for complete fittings including Nut, Bite Ring and Body.
Only body without Nut and Bite Ring are available on request.
If you have requirements other than above size and Dimensions,
please contact us with complete details
Dimensions are for reference only and are subject to change without notice.
46
O-RING
SEALEXCEL
PART NO.
APPROX. WT.
Kg per 100 pcs.
4 x 1.5
6 x 1.5
7 x 1.5
9 x 1.5
12 x 2
15 x 2
20 x 2
26 x 2
32 x 2.5
38 x 2.5
4 x 1.5
6 x 1.5
7.5 x 1.5
9 x 1.5
10 x 2
12 x 2
16.3 x 2.4
20.3 x 2.4
25.3 x 2.4
33.3 x 2.4
EGER-6L-2GED
EGER-8L-4GED
EGER-10L-4GED
EGER-12l-6GED
EGER-15L-8GED
EGER-18L-8GED
EGER-22L-12GED
EGER-28L-16GED
EGER-35L-20GED
EGER-42L-24GED
EGER-6S-4GED
EGER-8S-4GED
EGER-10S-6GED
EGER-12S-6GED
EGER-14S-8GED
EGER-16S-8GED
EGER-20S-12GED
EGER-25S-16GED
EGER-30S-20GED
EGER-38S-24GED
0.24
0.44
0.47
0.69
1.21
1.34
1.96
3.60
4.55
6.62
0.45
0.50
0.74
0.82
1.26
1.46
2.21
4.02
5.82
7.86
Suffixes the following material code along with above
part number while sending your enquiries / orders.
Material
Code
SS316L
SS304
EL
I
Example
EGER-6L-2GED/EL
EGER-6L-2GED/I
The material SS316Ti are available on request
STRAIGHT STUD ADAPTER WITH SWIVEL NUT- EGEM
MALE STUD THREAD : metric (Parallel with ED sealing)
T
Metric
D1
S2
M
S1
ED Seal
O-Ring
L1
B1
SERIES
L-Light
PN 315
PN 160
S-Heavy
PN 630
PN 400
PN 315
Dimensions are in millimeters
TUBE
O. D.
T
MALE STUD
THREAD
METRIC
M
6
8
10
12
15
18
22
28
35
42
6
8
10
12
14
16
20
25
30
38
M 10x1
M 12x1.5
M 14x1.5
M 16x1.5
M 18x1.5
M 22x1.5
M 26x1.5
M 33x2
M 42x2
M 48x2
M 12x1.5
M 14x1.5
M 16x1.5
M 18x1.5
M 20x1.5
M 22x1.5
M 27x2
M 33x2
M 42x2
M 48x2
M12x1.5
M14x1.5
M16x1.5
M18x1.5
M22x1.5
M26x1.5
M30x2
M36x2
M45x2
M52x2
M14x1.5
M16x1.5
M18x1.5
M20x1.5
M22x1.5
M24x1.5
M30x2
M36x2
M42x2
M52x2
B1
D1
L1
S1
S2
8
12
12
12
12
14
16
18
20
22
12
12
12
12
14
14
16
18
20
22
14
17
19
22
24
27
32
40
50
55
17
19
22
24
27
27
32
41
50
55
24.5
26.5
27.5
34
32
30.5
32.5
35
42.5
46.5
27
29.5
32
34
36.5
37
43
48
51
60
14
17
19
22
24
27
32
41
50
55
17
19
22
24
27
27
32
41
50
55
14
17
19
22
27
32
36
41
50
60
17
19
22
24
27
30
36
46
50
60
ED Seal/O-Ring : Buna-N is standard
â
Viton are available on request
For Viton: Suffix code 'V' alongwith the part number of the fittings
Example :EGEM-6L-10MED/ELV
Dimension L1 is approximate length with tightened nut.
The above part numbers are for complete fittings including Nut, Bite Ring and Body.
Only body without Nut and Bite Ring are available on request.
If you have requirements other than above size and Dimensions,
please contact us with complete details
Dimensions are for reference only and are subject to change without notice.
O-RING
SEALEXCEL
PART NO.
APPROX. WT.
Kg per 10 pcs.
4 x 1.5
6 x 1.5
7.5 x 1.5
9 x 1.5
12 x 2
15 x 2
20 x 2
26 x 2
32 x 2.5
38 x 2
4 x 1.5
6 x 1.5
7.5 x 1.5
9 x 1.5
10 x 2
12 x 2
16.3 x 2.4
20.3 x 2.4
25.3 x 2.4
33.3 x 2.4
EGEM-6L-10MED
EGEM-8L-12MED
EGEM-10L-14MED
EGEM-12L-16MED
EGEM-15L-18MED
EGEM-18L-22MED
EGEM-22L-26MED
EGEM-28L-33MED
EGEM-35L-42MED
EGEM-42L-48MED
EGEM-6S-12MED
EGEM-8S-14MED
EGEM-10S-16MED
EGEM-12S-18MED
EGEM-14S-20MED
EGEM-16S-22MED
EGEM-20S-27MED
EGEM-25S-33MED
EGEM-30S-42MED
EGEM-38S-48MED
0.23
0.38
0.48
0.67
1.01
1.38
1.99
3.58
4.50
7.08
0.40
0.51
0.71
0.89
1.21
1.48
2.23
4.00
5.83
7.82
Suffixes the following material code along with above
part number while sending your enquiries / orders.
Material
Code
SS316L
SS304
EL
I
Example
EGEM-6L-10MED/EL
EGEM-6L-10MED/I
The material SS316Ti are available on request
47
ADJUSTABLE ELBOW FITTINGS -EVW
(for adaptions)
L1
L2
S3
S2
Pre-installed Nut & Bite Ring for
connection with existing cone
T
L4
Final Assembly (in appropriate Body)
at least ½ turn beyond the point of
clearly perceptible resistance
S2
T
M
SERIES
L-Light
PN 315
PN 160
S-Heavy
PN 630
PN 400
PN 315
Dimensions are in millimeters
TUBE
O. D.
T
M
6
8
10
12
15
18
22
28
35
42
6
8
10
12
14
16
20
25
30
38
M12x1.5
M14x1.5
M16x1.5
M18x1.5
M22x1.5
M26x1.5
M30x2
M36x2
M45x2
M52x2
M14x1.5
M16x1.5
M18x1.5
M20x1.5
M22x1.5
M24x1.5
M30x2
M36x2
M42x2
M52x2
L1
L2
L4
S2
S3
27
29
30
32
36
40
44
47
56
63
31
32
34
38
40
43
48
54
62
72
12
14
15
17
21
23.5
27.5
30.5
34.5
40
16
17
17.5
21.5
22
24.5
26.5
30
35.5
41
26
27.5
29
29.5
32.5
35.5
38.5
41.5
51
60
27
27.5
30
31
35
36.5
44.5
50
55
66.5
14
17
19
22
27
32
36
41
50
60
17
19
22
24
27
30
36
46
50
60
12
12
14
17
19
24
27
36
41
50
12
14
17
19
19
24
27
36
41
50
Dimension L1 is approximate length with tightened nut.
The above part numbers are for complete fittings including Nut, Bite Ring and Body.
Only body without Nut and Bite Ring are available on request.
If you have requirements other than above size and Dimensions,
please contact us with complete details
Dimensions are for reference only and are subject to change without notice.
SEALEXCEL
PART NO.
APPROX. WT.
Kg per 10 pcs.
EVW-6L
EVW-8L
EVW-10L
EVW-12L
EVW-15L
EVW-18L
EVW-22L
EVW-28L
EVW-35L
EVW-42L
EVW-6S
EVW-8S
EVW-10S
EVW-12S
EVW-14S
EVW-16S
EVW-20S
EVW-25S
EVW-30S
EVW-38S
0.38
0.52
0.68
0.91
1.55
2.28
3.15
4.45
6.97
10.71
0.59
0.80
1.12
1.38
1.87
2.52
3.91
7.74
9.74
14.80
Suffixes the following material code along with above
part number while sending your enquiries / orders.
Material
Code
SS316L
SS304
EL
I
Example
EVW-6L/EL
EVW-6L/I
The material SS316Ti are available on request
48
ADJUSTABLE ELBOW FITTINGS-EVWR
MALE STUD THREAD : BSP (Parallel with cutting face to DIN 3852 Form B)
L1
L2
S3
S2
T
L4
Pre-installed with straight male stud
thread BSP (with cutting face to
DIN 3852 form B)
Final Assembly (in appropriate Body)
at least ½ turn beyond the point of
clearly perceptible resistance
L5
S2
B1
S1
Cutting Face
BSP
D1
SERIES
L-Light
PN 315
PN 160
S-Heavy
PN 630
PN 400
PN 250
Dimensions are in millimeters
TUBE
O. D.
T
MALE STUD
THREAD
BSP
B1
D1
L1
L2
L4
L5
S1
S2
S3
6
8
10
12
15
18
22
28
35
42
6
8
10
12
14
16
20
25
30
38
1/8
1/4
1/4
3/8
1/2
1/2
3/4
1
1-1/4
1-1/2
1/4
1/4
3/8
3/8
1/2
1/2
3/4
1
1-1/4
1-1/2
8
12
12
12
14
14
16
18
20
22
12
12
12
12
14
14
16
18
20
22
14
18
18
22
26
26
32
39
49
55
18
18
22
26
26
26
32
39
49
55
27
29
30
32
36
40
44
47
56
63
31
32
34
38
40
43
48
54
62
72
12
14
15
17
21
23.5
27.5
30.5
34.5
40
16
17
17.5
21.5
22
24.5
26.5
30
35.5
41
34.5
37.5
40
42
46.5
50
55
59
68.5
79
40
42.5
45
48
54
55
65
73
78.5
92.5
23
25
26
27
29
31
33
34
39
42
28
30
31
33
37
37
42
47
50
57
14
19
19
22
27
27
32
41
50
55
19
19
22
22
27
27
32
41
50
55
14
17
19
22
27
32
36
41
50
60
17
19
22
24
27
30
36
46
50
60
12
12
14
17
19
24
27
36
41
50
12
14
17
19
19
24
27
36
41
50
Dimension L1, L4 & L5is approximate length with tightened nut.
The above part numbers are for complete fittings including Nut, Bite Ring and Body.
Only body without Nut and BiteRing are available on request.
If you have requirements other than above size and Dimensions,
please contact us with complete details
Dimensions are for reference only and are subject to change without notice.
SEALEXCEL
PART NO.
APPROX. WT.
Kg per 100 pcs.
EVWR-6L-2RP
EVWR-8L-4RP
EVWR-10L-4RP
EVWR-12L-6RP
EVWR-15L-8RP
EVWR-18L-8RP
EVWR-22L-12RP
EVWR-28L-16RP
EVWR-35L-20RP
EVWR-42L-24RP
EVWR-6S-4RP
EVWR-8S-4RP
EVWR-10S-6RP
EVWR-12S-6RP
EVWR-14S-8RP
EVWR-16S-8RP
EVWR-20S-12RP
EVWR-25S-16RP
EVWR-30S-20RP
EVWR-38S-24RP
0.52
0.80
0.96
1.33
2.28
2.99
4.18
6.13
9.73
14.2
0.95
1.21
1.69
2.01
2.84
3.44
5.42
10.41
13.96
20.40
Suffixes the following material code along with above
part number while sending your enquiries / orders.
Material
Code
SS316L
SS304
EL
I
Example
EVWR-6L-2RP/EL
EVWR-6L-2RP/I
The material SS316Ti are available on request
49
ADJUSTABLE ELBOW FITTINGS-EVWM
MALE STUD THREAD : Metric (Parallel with cutting face to DIN 3852 Form B)
L1
S2
L2
S3
L4
T
L5
S2
S1
B1
Pre-installed with straight male stud
thread Metric (with cutting face to
DIN 3852 form B)
Final Assembly (in appropriate Body)
at least ½ turn beyond the point of
clearly perceptible resistance
Cutting Face
Metric
D1
SERIES
L-Light
PN315
PN160
S-Heavy
PN 630
PN 400
PN 250
TUBE
O. D.
T
MALE STUD
THREAD
METRIC
B1
D1
L1
L2
L4
L5
S1
S2
S3
6
8
10
12
15
18
22
28
35
42
6
8
10
12
14
16
20
25
30
38
M 10x1
M 12x1.5
M 14x1.5
M 16x1.5
M 18x1.5
M 22x1.5
M 26x1.5
M 33x2
M 42x2
M 48x2
M 12x1.5
M 14x1.5
M 16x1.5
M 18x1.5
M 20x1.5
M 22x1.5
M 27x2
M 33x2
M 42x2
M 48x2
8
12
12
12
12
14
16
18
20
22
12
12
12
12
14
14
16
18
20
22
14
17
19
21
23
27
31
39
49
55
17
19
21
23
25
27
32
39
49
55
27
29
30
32
36
40
44
47
56
63
31
32
34
38
40
43
48
54
62
72
12
14
15
17
21
23.5
27.5
30.5
34.5
40
16
17
17.5
21.5
22
24.5
26.5
30
35.5
41
34.5
37.5
40
42
46
50
55
59
68.5
79
40
42.5
45
48
54
55
65
73
78.5
92.5
23
25
26
27
29
31
33
34
39
42
28
30
31
33
37
37
42
47
50
57
14
17
19
22
24
27
32
41
50
55
17
19
22
24
27
27
32
41
50
55
14
17
19
22
27
32
36
41
50
60
17
19
22
24
27
30
36
46
50
60
12
12
14
17
19
24
27
36
41
50
12
14
17
19
19
24
27
36
41
50
Dimensions are in millimeters
Dimension L1, L4 & L5is approximate length with tightened nut.
The above part numbers are for complete fittings including Nut, Bite Ring and Body.
Only body without Nut and Bite Ring are available on request.
If you have requirements other than above size and Dimensions,
please contact us with complete details
Dimensions are for reference only and are subject to change without notice.
SEALEXCEL
PART NO.
APPROX. WT.
Kg per 100 pcs.
EVWM-6L-10MP
EVWM-8L-12MP
EVWM-10L-14MP
EVWM-12L-16MP
EVWM-15L-18MP
EVWM-18L-22MP
EVWM-22L-26MP
EVWM-28L-33MP
EVWM-35L-42MP
EVWM-42L-48MP
EVWM-6S-12MP
EVWM-8S-14MP
EVWM-10S-16MP
EVWM-12S-18MP
EVWM-14S-20MP
EVWM-16S-22MP
EVWM-20S-27MP
EVWM-25S-33MP
EVWM-30S-42MP
EVWM-38S-48MP
0.52
0.80
0.96
1.33
2.28
2.99
4.18
6.13
9.73
14.20
0.95
1.21
1.69
2.01
2.84
3.44
5.42
10.41
13.96
20.40
Suffixes the following material code along with above
part number while sending your enquiries / orders.
Material
Code
SS316L
SS304
EL
I
Example
EVWM-6L-10MP/EL
EVWM-6L-10MP/I
The material SS316Ti are available on request
50
ADJUSTABLE TEE FITTINGS-EVT
(For Adaptions)
L1
S3
S2
L2
Pre-installed Nut & Bite Ring for
connection with existing cone
L4
Final Assembly (in appropriate Body)
at least ½ turn beyond the point of
clearly perceptible resistance
T
S2
T
M
SERIES
L-Light
PN 315
PN 160
S-Heavy
PN 630
PN 400
PN 315
Dimensions are in millimeters
TUBE
O. D.
T
M
6
8
10
12
15
18
22
28
35
42
6
8
10
12
14
16
20
25
30
38
M 12x1.5
M 14x1.5
M 16x1.5
M 18x1.5
M 22x1.5
M 26x1.5
M 30x2
M 36x2
M 45x2
M 52x2
M 14x1.5
M 16x1.5
M 18x1.5
M 20x1.5
M 22x1.5
M 24x1.5
M 30x2
M 36x2
M 42x2
M 52x2
L1
L2
L4
S2
S3
27
29
30
32
36
40
44
47
56
63
31
32
34
38
40
43
48
54
62
72
12
14
15
17
21
23.5
27.5
30.5
34.5
40
16
17
17.5
21.5
22
24.5
26.5
30
35.5
41
26
27.5
29
30.5
32.5
35.5
39
43.5
54.5
60
27
29
32
33
35
36.5
44.5
50.5
56.5
66.5
14
17
19
22
27
32
36
41
50
60
17
19
22
24
27
30
36
46
50
60
12
12
14
17
19
24
27
36
41
50
12
14
17
19
19
24
27
36
41
50
Dimension L1 is approximate length with tightened nut.
The above part numbers are for complete fittings including Nut, Bite Ring and Body.
Only body without Nut and Bite Ring are available on request.
If you have requirements other than above size and Dimensions,
please contact us with complete details
Dimensions are for reference only and are subject to change without notice.
SEALEXCEL
PART NO.
APPROX. WT.
Kg per 10 pcs.
EVT-6L
EVT-8L
EVT-10L
EVT-12L
EVT-15L
EVT-18L
EVT-22L
EVT-28L
EVT-35L
EVT-42L
EVT-6S
EVT-8S
EVT-10S
EVT-12S
EVT-14S
EVT-16S
EVT-20S
EVT-25S
EVT-30S
EVT-38S
0.38
0.52
0.68
0.91
1.55
2.28
3.15
4.45
6.97
10.71
0.59
0.80
1.12
1.38
1.87
2.52
3.91
7.74
9.74
14.8
Suffixes the following material code along with above
part number while sending your enquiries / orders.
Material
Code
SS316L
SS304
EL
I
Example
EVT-6L/EL
EVT-6L/S
The material SS316Ti are available on request
51
ADJUSTABLE TEE FITTINGS-EVTR
MALE STUD THREAD : BSP (Parallel with cutting face to DIN 3852 Form B)
L1
T
L4
S2
L5
Pre-installed with straight male stud
thread BSP (with cutting face to
DIN 3852 form B)
Final Assembly (in appropriate Body)
at least ½ turn beyond the point of
clearly perceptible resistance
S2
L2
S3
B1
S1
Cutting Face
BSP
D1
SERIES
L-Light
PN315
PN 160
S-Heavy
PN 630
PN 400
PN 250
TUBE
O. D.
T
MALE STUD
THREAD
BSP
B1
D1
L1
L2
L4
L5
S1
S2
S3
6
8
10
12
15
18
22
28
35
42
6
8
10
12
14
16
20
25
30
38
1/8
1/4
1/4
3/8
1/2
1/2
3/4
1
1-1/4
1-1/2
1/4
1/4
3/8
3/8
1/2
1/2
3/4
1
1-1/4
1-1/2
8
12
12
12
14
14
16
18
20
22
12
12
12
12
14
14
16
18
20
22
14
18
18
22
26
26
32
39
49
55
18
18
22
22
26
26
32
39
49
55
27
29
30
32
36
40
44
47
56
63
31
32
34
38
40
43
48
54
62
72
12
14
15
17
21
23.5
27.5
30.5
34.5
40
16
17
17.5
21.5
22
24.5
26.5
30
35.5
41
34.5
37.5
40
43
46.5
50
55.5
61
72
79
40
44
47
50
54
55
65
73.5
80
92.5
23
25
26
27
29
31
33
34
39
42
28
30
31
33
37
37
42
47
50
57
14
19
19
22
27
27
32
41
50
55
19
19
22
22
27
27
32
41
50
55
14
17
19
22
27
32
36
41
50
60
17
19
22
24
27
30
36
46
50
60
12
12
14
17
19
24
27
36
41
50
12
14
17
19
19
24
27
36
41
50
Dimensions are in millimeters
Dimension L1, L4 & L5 is approximate length with tightened nut.
The above part numbers are for complete fittings including Nut, Bite Ring and Body.
Only body without Nut and Bite Ring are available on request.
If you have requirements other than above size and Dimensions,
please contact us with complete details
Dimensions are for reference only and are subject to change without notice.
SEALEXCEL
PART NO.
APPROX. WT.
Kg per 10 pcs.
EVTR-6L-2RP
EVTR-8L-4RP
EVTR-10L-4RP
EVTR-12L-6RP
EVTR-15L-8RP
EVTR-18L-8RP
EVTR-22L-12RP
EVTR-28L-16RP
EVTR-35L-20RP
EVTR-42L-24RP
EVTR-6S-4RP
EVTR-8S-4RP
EVTR-10S-6RP
EVTR-12S-6RP
EVTR-14S-8RP
EVTR-16S-8RP
EVTR-20S-12RP
EVTR-25S-16RP
EVTR-30S-20RP
EVTR-38S-24RP
0.70
1.04
1.26
1.74
2.94
3.95
5.45
7.83
12.16
17.62
1.26
1.59
2.23
2.65
3.68
4.61
7.12
13.59
17.8
25.94
Suffixes the following material code along with above
part number while sending your enquiries / orders.
Material
Code
SS316L
SS304
EL
I
Example
EVTR-6L-2RP/EL
EVTR-6L-2RP/S
The material SS316Ti are available on request
52
ADJUSTABLE TEE FITTINGS-EVTM
MALE STUD THREAD : Metric (Parallel with cutting face to DIN 3852 Form B)
L1
T
L4
S2
L5
Pre-installed with straight male stud
thread Metric (with cutting face to
DIN 3852 form B)
Final Assembly (in appropriate Body)
at least ½ turn beyond the point of
clearly perceptible resistance
S2
L2
S3
B1
S1
Cutting Face
Metric
D1
SERIES
L-Light
PN315
PN 160
S-Heavy
PN 630
PN 400
PN 250
TUBE
O. D.
T
MALE STUD
THREAD
METRIC
B1
D1
L1
L2
L4
L5
S1
S2
S3
6
8
10
12
15
18
22
28
35
42
6
8
10
12
14
16
20
25
30
38
M10 x 1
M12 x 1.5
M14 x 1.5
M16 x 1.5
M18 x 1.5
M22 x 1.5
M26 x 1.5
M33 x 2
M42 x 2
M48 x 2
M12 x 1.5
M14 x 1.5
M16 x 1.5
M18 x 1.5
M20 x 1.5
M22 x 1.5
M27 x 2
M33 x 2
M42 x 2
M48 x 2
8
12
12
12
12
14
16
18
20
22
12
12
12
12
14
14
16
18
20
22
14
17
19
21
23
27
31
39
49
55
17
19
21
23
25
27
32
39
49
55
27
29
30
32
36
40
44
47
56
63
31
32
34
38
40
43
48
54
62
72
12
14
15
17
21
23.5
27.5
30.5
34.5
40
16
17
17.5
21.5
22
24.5
26.5
30
35.5
41
34.5
37.5
40
43
46.5
50
55.5
61
72
79
40
44
47
50
54
55
65
73.5
80
92.5
23
25
26
27
29
31
33
34
39
42
28
30
31
33
37
37
42
47
50
57
14
17
19
22
24
27
32
41
50
55
17
19
22
24
27
27
32
41
50
55
14
17
19
22
27
32
36
41
50
60
17
19
22
24
27
30
36
46
50
60
12
12
14
17
19
24
27
36
41
50
12
14
17
19
19
24
27
36
41
50
Dimensions are in millimeters
Dimension L1, L4 & L5 is approximate length with tightened nut.
The above part numbers are for complete fittings including Nut, Bite Ring and Body.
Only body without Nut and Bite Ring are available on request.
If you have requirements other than above size and Dimensions,
please contact us with complete details
Dimensions are for reference only and are subject to change without notice.
SEALEXCEL
PART NO.
APPROX. WT.
Kg per 10 pcs.
EVTM-6L-10MP
EVTM-8L-12MP
EVTM-10L-14MP
EVTM-12L-16MP
EVTM-15L-18MP
EVTM-18L-22MP
EVTM-22L-26MP
EVTM-28L-33MP
EVTM-35L-42MP
EVTM-42L-48MP
EVTM-6S-12MP
EVTM-8S-14MP
EVTM-10S-16MP
EVTM-12S-18MP
EVTM-14S-20MP
EVTM-16S-22MP
EVTM-20S-27MP
EVTM-25S-33MP
EVTM-30S-42MP
EVTM-38S-48MP
0.70
1.04
1.26
1.74
2.94
3.95
5.45
7.83
12.16
17.62
1.26
1.59
2.23
2.65
3.68
4.61
7.12
13.59
17.8
25.94
Suffixes the following material code along with above
part number while sending your enquiries / orders.
Material
Code
SS316L
SS304
EL
I
Example
EVTM-6L-10MP/EL
EVTM-6L-10MP/I
The material SS316Ti are available on request
53
ADJUSTABLE BARREL TEE FITTINGS-EVL
(For adaptions)
L1
L2
S2
Pre-installed Nut & Bite Ring for
connection with existing cone
L4
S3
T
L5
Final Assembly (in appropriate Body)
at least ½ turn beyond the point of
clearly perceptible resistance
S2
T
M
SERIES
L-Light
PN 315
PN160
S-Heavy
PN 630
PN 400
PN 315
Dimensions are in millimeters
TUBE
O. D.
T
M
6
8
10
12
15
18
22
28
35
42
6
8
10
12
14
16
20
25
30
38
M 12x1.5
M 14x1.5
M 16x1.5
M 18x1.5
M 22x1.5
M 26x1.5
M 30x2
M 36x2
M 45x2
M 52x2
M 14x1.5
M 16x1.5
M 18x1.5
M 20x1.5
M 22x1.5
M 24x1.5
M 30x2
M 36x2
M 42x2
M 52x2
L1
L2
L4
L5
S2
S3
27
29
30
32
36
40
44
47
56
63
31
32
34
38
40
43
48
54
62
72
12
14
15
17
21
23.5
27.5
30.5
34.5
40
16
17
17.5
21.5
22
24.5
26.5
30
35.5
41
53
56
59
62
69
75
83
91
111
123
58
61
66
71
75
79
93
105
119
138
26
27.5
29
30.5
32.5
35.5
39
43.5
54.5
60
27
29
32
33
35
36.5
44.5
50.5
56.5
66.5
14
17
19
22
27
32
36
41
50
60
17
19
22
24
27
30
36
46
50
60
12
12
14
17
19
24
27
36
41
50
12
14
17
19
19
24
27
36
41
50
Dimension L1 & L4 is approximate length with tightened nut.
The above part numbers are for complete fittings including Nut, Bite Ring and Body.
Only body without Nut and Bite Ring are available on request.
If you have requirements other than above size and Dimensions,
please contact us with complete details
Dimensions are for reference only and are subject to change without notice.
SEALEXCEL
PART NO.
APPROX. WT.
Kg per 10 pcs.
EVL-6L
EVL-8L
EVL-10L
EVL-12L
EVL-15L
EVL-18L
EVL-22L
EVL-28L
EVL-35L
EVL-42L
EVL-6S
EVL-8S
EVL-10S
EVL-12S
EVL-14S
EVL-16S
EVL-20S
EVL-25S
EVL-30S
EVL-38S
0.57
0.77
0.96
1.30
2.23
3.20
4.40
6.06
9.35
14.09
0.91
1.18
1.65
2.04
2.79
3.68
5.61
10.9
13.49
20.42
Suffixes the following material code along with above
part number while sending your enquiries / orders.
Material
Code
SS316L
SS304
EL
I
Example
EVL-6L/EL
EVL-6L/I
The material SS316Ti are available on request
54
ADJUSTABLE BARREL TEE FITTINGS-EVLR
MALE STUD THREAD : BSP (Parallel with cutting face to DIN 3852 form B)
L1
L2
S2
Pre-installed with straight male stud
thread Metric (with cutting face to
DIN 3852 form B)
Final Assembly (in appropriate Body)
at least ½ turn beyond the point of
clearly perceptible resistance
S3
L6
L4
T
L5
S2
B1
S1
Cutting Face
BSP
D1
SERIES
L-Light
PN 315
PN 160
S-Heavy
PN 630
PN 400
PN 250
TUBE
O. D.
T
MALE STUD
THREAD
BSP
B1
D1
L1
L2
L4
L5
L6
S1
S2
S3
6
8
10
12
15
18
22
28
35
42
6
8
10
12
14
16
20
25
30
38
1/8
1/4
1/4
3/8
1/2
1/2
3/4
1
1-1/4
1-1/2
1/4
1/4
3/8
3/8
1/2
1/2
3/4
1
1-1/4
1-1/2
8
12
12
12
14
14
16
18
20
22
12
12
12
12
14
14
16
18
20
22
14
18
18
22
26
26
32
39
49
55
18
18
22
22
26
26
32
39
49
55
27
29
30
32
36
40
44
47
56
63
31
32
34
38
40
43
48
54
62
72
12
14
15
17
21
23.5
27.5
30.5
34.5
40
16
17
17.5
21.5
22
24.5
26.5
30
35.5
41
61
66
70
75
83
89
99
108
128
142
71
376
81
88
94
98
113
128
142
164
23
25
26
27
29
31
33
34
39
42
28
30
31
33
37
37
42
47
50
57
34.5
37.5
40
43
46.0
50
55.5
61
72
79
40
44
47
50
54
55
65
73.5
80
92.5
14
19
19
22
27
27
32
41
50
55
19
19
22
22
27
27
32
41
50
55
14
17
19
22
27
32
36
41
50
60
17
19
22
24
27
30
36
46
50
60
12
12
14
17
19
24
27
36
41
50
12
14
17
19
19
24
27
36
41
50
Dimensions are in millimeters
Dimension L1, L4, L5 & L6 is approximate length with tightened nut.
The above part numbers are for complete fittings including Nut, Bite Ring and Body.
Only body without Nut and Bite Ring are available on request.
If you have requirements other than above size and Dimensions,
please contact us with complete details
Dimensions are for reference only and are subject to change without notice.
SEALEXCEL
PART NO.
APPROX. WT.
Kg per 100 pcs.
EVLR-6L-2RP
EVLR-8L-4RP
EVLR-10L-4RP
EVLR-12L-6RP
EVLR-15L-8RP
EVLR-18L-8RP
EVLR-22L-12RP
EVLR-28L-16RP
EVLR-35L-20RP
EVLR-42L-24RP
EVLR-6S-4RP
EVLR-8S-4RP
EVLR-10S-6RP
EVLR-12S-6RP
EVLR-14S-8RP
EVLR-16S-8RP
EVLR-20S-12RP
EVLR-25S-16RP
EVLR-30S-20RP
EVLR-38S-24RP
0.71
1.04
1.24
1.72
2.95
3.92
5.43
7.74
12.1
17.58
1.26
1.59
2.22
2.66
3.76
4.60
7.11
13.57
17.72
26.02
Suffixes the following material code along with above
part number while sending your enquiries / orders.
Material
Code
SS316L
SS304
EL
I
Example
EVLR-6L-2RP/EL
EVLR-6L-2RP/I
The material SS316Ti are available on request
55
ADJUSTABLE BARREL TEE FITTINGS-EVLM
MALE STUD THREAD : Metric (parallel with cutting face according to DIN 3852 form B
L1
L2
S2
Pre-installed with straight male stud
thread Metric (with cutting face DIN
3852 form B)
Final Assembly (in appropriate Body)
at least ½ turn beyond the point of
clearly perceptible resistance
S3
L6
L4
T
L5
S2
B1
S1
Cutting Face
Metric
D1
SERIES
L-Light
PN315
PN160
S-Heavy
PN 630
PN 400
PN 250
TUBE
O. D.
T
MALE STUD
THREAD
METRIC
B1
D1
L1
L2
L4
L5
L6
S1
S2
6
8
10
12
15
18
22
28
35
42
6
8
10
12
14
16
20
25
30
38
M 10 x 1
M 12 x 1.5
M 14 x 1.5
M 16 x 1.5
M 18 x 1.5
M 22 x 1.5
M 26 x 1.5
M 33 x 2
M 42 x 2
M 48 x 2
M 12 x 1.5
M 14 x 1.5
M 16 x 1.5
M 18 x 1.5
M 20 x 1.5
M 22 x 1.5
M 27 x 2
M 33 x 2
M 42 x 2
M 48 x 2
8
12
12
12
12
14
16
18
20
22
12
12
12
12
14
14
16
18
20
22
14
17
19
21
23
27
31
39
49
55
17
19
21
23
25
27
32
39
49
55
27
29
30
32
36
40
44
47
56
63
31
32
34
38
40
43
48
54
62
72
12
14
15
17
21
23.5
27.5
30.5
34.5
40
16
17
17.5
21.5
22
24.5
26.5
30
35.5
41
61
66
70
75
83
89
99
108
128
142
71
76
81
88
94
98
113
128
142
164
23
25
26
27
29
31
33
34
39
42
28
30
31
33
37
37
42
47
50
57
34.5
37.5
40
43
46
50
55.5
61
72
79
40
44
47
50
54
55
65
73.5
80
92.5
14
17
19
22
24
27
32
41
50
55
17
19
22
24
27
27
32
41
50
55
14
17
19
22
27
32
36
41
50
60
17
19
22
24
27
30
36
46
50
60
Dimensions are in millimeters
Dimension L1, L4, L5 & L6 is approximate length with tightened nut.
The above part numbers are for complete fittings including Nut, Bite Ring and Body.
Only body without Nut and Bite Ring are available on request.
If you have requirements other than above size and Dimensions,
please contact us with complete details
Dimensions are for reference only and are subject to change without notice.
S3
SEALEXCEL
PART NO.
APPROX. WT.
Kg per 10 pcs.
12
12
14
17
19
24
27
36
41
50
12
14
17
19
19
24
27
36
41
50
EVLM-6L-10MP
EVLM-8L-12MP
EVLM-10L-14MP
EVLM-12L-16MP
EVLM-15L-18MP
EVLM-18L-22MP
EVLM-22L-26MP
EVLM-28L-33MP
EVLM-35L-42MP
EVLM-42L-48MP
EVLM-6S-12MP
EVLM-8S-14MP
EVLM-10S-16MP
EVLM-12S-18MP
EVLM-14S-20MP
EVLM-16S-22MP
EVLM-20S-27MP
EVLM-25S-33MP
EVLM-30S-42MP
EVLM-38S-48MP
0.71
1.04
1.24
1.72
2.95
3.92
5.43
7.74
12.10
17.58
1.26
1.59
2.22
2.66
3.76
4.60
7.11
13.57
17.72
26.02
Suffixes the following material code along with above
part number while sending your enquiries / orders.
Material
Code
SS316L
SS304
EL
I
Example
EVLM-6L-10MP/EL
EVLM-6L-10MP/I
The material SS316Ti are available on request
56
ADJUSTABLE ELBOW FITTINGS WITH SWIVEL NUT-EW
(for adaptions)
L1
S3
S2
L2
L4
T
S2
O-Ring
T
M
SERIES
L-Light
PN 315
PN 160
S-Heavy
PN 630
PN 400
PN 315
Dimensions are in millimeters
TUBE
O. D.
T
M
6
8
10
12
15
18
22
28
35
42
6
8
10
12
14
16
20
25
30
38
M12x1.5
M14x1.5
M16x1.5
M18x1.5
M22x1.5
M26x1.5
M30x2
M36x2
M45x2
M52x2
M14x1.5
M16x1.5
M18x1.5
M20x1.5
M22x1.5
M24x1.5
M30x2
M36x2
M42x2
M52x2
L1
L2
L4
S2
S3
27
29
30
32
36
40
44
47
56
63
31
32
34
38
40
43
48
54
62
72
12
14
15
17
21
23.5
27.5
30.5
34.5
40
16
17
17.5
21.5
22
24.5
26.5
30
35.5
41
26
27.5
29
29.5
32.5
35.5
38.5
41.5
51
56
27
27.5
30
31
35
36.5
44.5
50
55
63
14
17
19
22
27
32
36
41
50
60
17
19
22
24
27
30
36
46
50
60
12
12
14
17
19
24
27
36
41
50
12
14
17
19
19
24
27
36
41
50
O-Ring : Buna-N is standard
â
Viton are available on request
For Viton: Suffix code 'V' alongwith the part number of the fittings
Example : EW-6L/ELV
Dimension L1 is approximate length with tightened nut.
The above part numbers are for complete fittings including Nut, Bite Ring and Body.
Only body without Nut and Bite Ring are available on request.
If you have requirements other than above size and Dimensions,
please contact us with complete details
Dimensions are for reference only and are subject to change without notice.
O-Ring
SEALEXCEL
PART NO.
APPROX. WT.
Kg per 10 pcs.
4 x 1.5
6 x 1.5
7.5 x 1.5
9 x 1.5
12 x 2
15 x 2
20 x 2
26 x 2
32 x 2.5
38 x 2.5
4 x 1.5
6 x 1.5
7.5 x 1.5
9 x 1.5
10 x 2
12 x 2
16.3 x 2.4
20.3 x 2.4
25.3 x 2.4
33.3 x 2.4
EW-6L
EW-8L
EW-10L
EW-12L
EW-15L
EW-18L
EW-22L
EW-28L
EW-35L
EW-42L
EW-6S
EW-8S
EW-10S
EW-12S
EW-14S
EW-16S
EW-20S
EW-25S
EW-30S
EW-38S
0.40
0.55
0.71
0.96
1.66
2.36
3.27
5.24
6.88
10.80
0.62
0.74
1.13
1.40
1.93
2.58
4.03
7.51
9.64
14.25
Suffixes the following material code along with above
part number while sending your enquiries / orders.
Material
Code
SS316L
SS304
EL
I
Example
EW-6L/EL
EW-6L/I
The material SS316Ti are available on request
57
ADJUSTABLE ELBOW FITTINGS WITH SWIVEL NUT-EWR
MALE STUD THREAD : BSP (Parallel with ED Sealing)
L1
S3
L2
S2
T
L4
S2
O-Ring
B1
S1
ED-Seal
BSP
D1
SERIES
L-Light
PN 315
PN 160
S-Heavy
PN 630
PN 400
PN 315
TUBE
O. D.
T
6
8
10
12
15
18
22
28
35
42
6
8
10
12
14
16
20
25
30
38
MALE STUD
THREAD
BSP
1/8
1/4
1/4
3/8
1/2
1/2
3/4
1
1-1/4
1-1/2
1/4
1/4
3/8
3/8
1/2
1/2
3/4
1
1-1/4
1-1/2
Dimensions are in millimeters
B1
D1
L1
L2
L4
S1
S2
S3
8
12
12
12
14
14
16
18
20
22
12
12
12
12
14
14
16
18
20
22
14
19
19
22
27
27
32
40
50
55
19
19
22
22
27
27
32
40
50
55
27
29
30
32
36
40
44
47
56
63
31
32
34
38
40
43
48
54
62
72
12
14
15
17
21
23.5
27.5
30.5
34.5
40
16
17
17.5
21.5
22
24.5
26.5
30
35.5
41
34.5
37.5
40
42
46.5
50
55
59
68.5
75
40
42.5
48
48
54
55
65
73
78.5
89
14
19
19
22
27
27
32
41
50
55
19
19
22
22
27
27
32
41
50
55
14
17
19
22
27
32
36
41
50
60
17
19
22
24
27
30
36
46
50
60
12
12
14
17
19
24
27
36
41
50
12
14
17
18
19
24
27
36
41
50
ED Seal/O-Ring : Buna-N is standard
â
Viton are available on request
For Viton: Suffix code 'V' alongwith the part number of the fittings
Example : EWR-6L-2GED/ELV
Dimension L1 & L4 is approximate length with tightened nut.
The above part numbers are for complete fittings including Nut, Bite Ring and Body.
Only body without Nut and Bite Ring are available on request.
If you have requirements other than above size and Dimensions,
please contact us with complete details
Dimensions are for reference only and are subject to change without notice.
58
APPROX. WT.
Kg per 10 pcs.
SEALEXCEL
PART NO.
EWR-6L-2GED
EWR-8L-4GED
EWR-10L-4GED
EWR-12L-6GED
EWR-15L-8GED
EWR-18L-8GED
EWR-22L-12GED
EWR-28L-16GED
EWR-35L-20GED
EWR-42L-24GED
EWR-6S-4GED
EWR-8S-4GED
EWR-10S-6GED
EWR-12S-6GED
EWR-14S-8GED
EWR-16S-8GED
EWR-20S-12GED
EWR-25S-16GED
EWR-30S-20GED
EWR-38S-24GED
0.53
0.82
0.98
1.37
2.37
3.06
4.29
6.94
9.56
14.23
0.97
1.15
1.68
2.03
2.89
3.50
5.52
10.17
13.82
19.88
Suffixes the following material code along with above
part number while sending your enquiries / orders.
Material
Code
SS316L
SS304
EL
I
Example
EWR-6L-2GED/EL
EWR-6L-2GED/I
The material SS316Ti are available on request
ADJUSTABLE ELBOW FITTINGS WITH SWIVEL NUT- EWM
MALE STUD THREAD : Metric (Parallel with ED Sealing)
L1
S3
S2
L2
T
L4
S2
O-Ring
B1
S1
ED-Seal
Metric
D1
SERIES
L-Light
PN 315
PN 160
S-Heavy
PN 630
PN 400
PN 315
Dimensions are in millimeters
TUBE
O. D.
T
MALE STUD
THREAD
METRIC
B1
D1
L1
L2
6
8
10
12
15
18
22
28
35
42
6
8
10
12
14
16
20
25
30
38
M 10x1
M 12x1.5
M 14x1.5
M 16x1.5
M 18x1.5
M 22x1.5
M 26x1.5
M 33x2
M 42x2
M 48x2
M 12x1.5
M 14x1.5
M 16x1.5
M 18x1.5
M 20x1.5
M 22x1.5
M 27x2
M 33x2
M 42x2
M 48x2
8
12
12
12
12
14
16
18
20
22
12
12
12
12
14
14
16
18
20
22
14
17
19
22
24
27
32
41
50
55
17
19
22
24
26
27
32
40
50
55
27
29
30
32
36
40
44
47
56
63
31
32
34
38
40
43
48
54
62
72
12
14
15
17
21
23.5
27.5
30.5
34.5
40
16
17
17.5
21.5
22
24.5
26.5
30
35.5
41
L4
S1
S2
S3
SEALEXCEL
PART NO.
APPROX. WT.
Kg per 10 pcs.
34.5
37.5
40
42
46.5
50
55
59
68.5
75
40
42.5
48
48
54
55
65
73
78.5
89
14
17
19
22
24
27
32
41
50
55
17
19
22
24
27
27
32
41
50
55
14
17
19
22
27
32
36
41
50
60
17
19
22
24
27
30
36
46
50
60
12
12
14
17
19
24
27
36
41
50
12
14
17
19
19
24
27
36
41
50
EWM-6L-10MED
EWM-8L-12MED
EWM-10L-14MED
EWM-12L-16MED
EWM-15L-18MED
EWM-18L-22MED
EWM-22L-26MED
EWM-28L-33MED
EWM-35L-42MED
EWM-42L-48MED
EWM-6S-12MED
EWM-8S-14MED
EWM-10S-16MED
EWM-12S-18MED
EWM-14S-20MED
EWM-16S-22MED
EWM-20S-27MED
EWM-25S-33MED
EWM-30S-42MED
EWM-38S-48MED
0.53
0.76
1.00
1.36
2.16
3.10
4.29
6.92
9.68
14.35
0.91
1.16
1.67
2.11
2.86
3.54
5.53
10.15
13.86
19.94
ED Seal/O-Ring : Buna-N is standard
â
Viton are available on request
For Viton: Suffix code 'V' alongwith the part number of the fittings
Example : EWM-6L-10MED/ELV
Dimension L1 & L4 is approximate length with tightened nut.
The above part numbers are for complete fittings including Nut, Bite Ring and Body.
Only body without Nut and Bite Ring are available on request.
If you have requirements other than above size and Dimensions,
please contact us with complete details
Dimensions are for reference only and are subject to change without notice.
Suffixes the following material code along with above
part number while sending your enquiries / orders.
Material
Code
SS316L
SS304
EL
I
Example
EWM-6L-10MED/EL
EWM-6L-10MED/I
The material SS316Ti are available on request
59
ADJUSTABLE TEE FITTINGS WITH SWIVEL NUT-ET
(for adaptions)
L1
S2
L2
S3
L4
T
S2
O-Ring
T
M
SERIES
L-Light
PN 315
PN 160
S-Heavy
PN 630
PN 400
PN 315
Dimensions are in millimeters
TUBE
O. D.
T
M
6
8
10
12
15
18
22
28
35
42
6
8
10
12
14
16
20
25
30
38
M12x1.5
M14x1.5
M16x1.5
M18x1.5
M22x1.5
M26x1.5
M30x2
M36x2
M45x2
M52x2
M14x1.5
M16x1.5
M18x1.5
M20x1.5
M22x1.5
M24x1.5
M30x2
M36x2
M42x2
M52x2
L1
L2
L4
S2
S3
27
29
30
32
36
40
44
47
56
63
31
32
34
38
40
43
48
54
62
72
12
14
15
17
21
23.5
27.5
30.5
34.5
40
16
17
17.5
21.5
22
24.5
26.5
30
35.5
41
26
27.5
29
29.5
32.5
35.5
38.5
41.5
51
56
27
27.5
30
31
35
36.5
44.5
50
55
63
14
17
19
22
27
32
36
41
50
60
17
19
22
24
27
30
36
46
50
60
12
12
14
17
19
24
27
36
41
50
12
14
17
19
19
24
27
36
41
50
O-Ring : Buna-N is standard
â
Viton are available on request
For Viton: Suffix code 'V' alongwith the part number of the fittings
Example : ET-6L/ELV
Dimension L1 & L4 is approximate length with tightened nut.
The above part numbers are for complete fittings including Nut, Bite Ring and Body.
Only body without Nut and Bite Ring are available on request.
If you have requirements other than above size and Dimensions,
please contact us with complete details
Dimensions are for reference only and are subject to change without notice.
60
O-RING
SEALEXCEL
PART NO.
APPROX. WT.
Kg per 10 pcs.
4 x 1.5
6 x 1.5
7.5 x 1.5
9 x 1.5
12 x 2
15 x 2
20 x 2
26 x 2
32 x 2.5
38 x 2.5
4 x 1.5
6 x 1.5
7.5 x 1.5
9 x 1.5
10 x 2
12 x 2
16.3 x 2.4
20.3 x 2.4
25.3 x 2.4
33.3 x 2.4
ET-6L
ET-8L
ET-10L
ET-12L
ET-15L
ET-18L
ET-22L
ET-28L
ET-35L
ET-42L
ET-6S
ET-8S
ET-10S
ET-12S
ET-14S
ET-16S
ET-20S
ET-25S
ET-30S
ET-38S
0.58
0.79
1.01
1.35
2.33
3.32
4.46
7.02
9.61
14.61
0.87
1.18
1.63
2.06
2.81
3.73
5.68
10.79
13.63
20.36
Suffixes the following material code along with above
part number while sending your enquiries / orders.
Material
Code
SS316L
SS304
EL
I
Example
ET-6L/EL
ET-6L/I
The material SS316Ti are available on request
ADJUSTABLE TEE FITTINGS WITH SWIVEL NUT-ETR
MALE STUD THREAD : BSP (Parallel with ED Sealing)
L1
S3
S2
L2
T
L4
S2
O-Ring
B1
S1
ED - Seal
BSP
D1
SERIES
L-Light
PN 315
PN 160
S-Heavy
PN 630
PN 400
PN 315
Dimensions are in millimeters
TUBE
O. D.
T
MALE STUD
THREAD
BSP
B1
D1
L1
L2
L4
S1
S2
S3
6
8
10
12
15
18
22
28
35
42
6
8
10
12
14
16
20
25
30
38
1/8
1/4
1/4
3/8
1/2
1/2
3/4
1
1-1/4
1-1/2
1/4
1/4
3/8
3/8
1/2
1/2
3/4
1
1-1/4
1-1/2
8
12
12
12
14
14
16
18
20
22
12
12
12
12
14
14
16
18
20
22
14
19
19
22
27
27
32
40
50
55
19
19
22
22
27
27
32
40
50
55
27
29
30
32
36
40
44
47
56
63
31
32
34
38
40
43
48
54
62
72
12
14
15
17
21
23.5
27.5
30.5
34.5
40
16
17
17.5
21.5
22
24.5
26.5
30
35.5
41
34.5
37.5
40
42
46.5
50
55
59
68.5
75
40
42.5
45
48
54
55
65
73
78.5
89
14
19
19
22
27
27
32
41
50
55
19
19
22
22
27
27
32
41
50
55
14
17
19
22
27
32
36
41
50
60
17
19
22
24
27
30
36
46
50
60
12
12
14
17
19
24
27
36
41
50
12
14
17
19
19
24
27
36
41
50
ED Seal/O-Ring : Buna-N is standard
â
Viton are available on request
For Viton: Suffix code 'V' alongwith the part number of the fittings
Example : ETR-6L-2GED/ELV
Dimension L1 & L4 is approximate length with tightened nut.
The above part numbers are for complete fittings including Nut, Bite Ring and Body.
Only body without Nut and Bite Ring are available on request.
If you have requirements other than above size and Dimensions,
please contact us with complete details
Dimensions are for reference only and are subject to change without notice.
APPROX. WT.
Kg per 10 pcs.
SEALEXCEL
PART NO.
ETR-6L-2GED
ETR-8L-4GED
ETR-10L-4GED
ETR-12L-6GED
ETR-15L-8GED
ETR-18L-8GED
ETR-22L-12GED
ETR-28L-16GED
ETR-35L-20GED
ETR-42L-24GED
ETR-6S-4GED
ETR-8S-4GED
ETR-10S-6GED
ETR-12S-6GED
ETR-14S-8GED
ETR-16S-8GED
ETR-20S-12GED
ETR-25S-16GED
ETR-30S-20GED
ETR-38S-24GED
0.71
1.06
1.29
1.76
3.04
4.03
5.49
8.72
12.33
18.04
1.22
1.59
2.19
2.68
3.77
4.55
7.17
13.45
17.81
25.98
Suffixes the following material code along with above
part number while sending your enquiries / orders.
Material
Code
SS316L
SS304
EL
I
Example
ETR-6L-2GED/EL
ETR-6L-2GED/I
The material SS316Ti are available on request
61
ADJUSTABLE TEE FITTINGS WITH SWIVEL NUT-ETM
MALE STUD THREAD : Metric (Parallel with ED Sealing)
L1
L2
S3
S2
T
L4
S2
O-Ring
B1
S1
ED- Seal
Metric
D1
SERIES
L-Light
PN 315
PN 160
S-Heavy
PN 630
PN 400
PN 315
Dimensions are in millimeters
TUBE
O. D.
T
MALE STUD
THREAD
METRIC
B1
D1
L1
L2
L4
S1
S2
S3
6
8
10
12
15
18
22
28
35
42
6
8
10
12
14
16
20
25
30
38
M 10x1
M 12x1.5
M 14x1.5
M 16x1.5
M 18x1.5
M 22x1.5
M 26x1.5
M 33x2
M 42x2
M 48x2
M 12x1.5
M 14x1.5
M 16x1.5
M 18x1.5
M 20x1.5
M 22x1.5
M 27x2
M 33x2
M 42x2
M 48x2
8
12
12
12
12
14
16
18
20
22
12
12
12
12
14
14
16
18
20
22
14
17
19
22
24
27
32
41
50
55
17
19
22
24
27
27
32
40
50
55
27
29
30
32
36
40
44
47
56
63
31
32
34
38
40
43
48
54
62
72
12
14
15
17
21
23.5
27.5
30.5
34.5
40
16
17
17.5
21.5
22
24.5
26.5
30
35.5
41
34.5
37.5
40
42
46.5
50
55
59
68.5
75
40
42.5
45
48
54
55
65
73
78.5
89
14
17
19
22
24
27
32
41
50
55
17
19
22
24
27
27
32
41
50
55
14
17
19
22
27
32
36
41
50
60
17
19
22
24
27
30
36
46
50
60
12
12
14
17
19
24
27
36
41
50
12
14
17
19
19
24
27
36
41
50
ED Seal/O-Ring : Buna-N is standard
â
Viton are available on request
For Viton: Suffix code 'V' alongwith the part number of the fittings
Example : ETM-6L-10MED/ELV
Dimension L1 & L4 is approximate length with tightened nut.
The above part numbers are for complete fittings including Nut, Bite Ring and Body.
Only body without Nut and Bite Ring are available on request.
If you have requirements other than above size and Dimensions,
please contact us with complete details
Dimensions are for reference only and are subject to change without notice.
62
SEALEXCEL
PART NO.
APPROX. WT.
Kg per 10 pcs.
ETM-6L-10MED
ETM-8L-12MED
ETM-10L-14MED
ETM-12L-16MED
ETM-15L-18MED
ETM-18L-22MED
ETM-22L-26MED
ETM-28L-33MED
ETM-35L-42MED
ETM-42L-48MED
ETM-6S-12MED
ETM-8S-14MED
ETM-10S-16MED
ETM-12S-18MED
ETM-14S-20MED
ETM-16S-22MED
ETM-20S-27MED
ETM-25S-33MED
ETM-30S-42MED
ETM-38S-48MED
0.72
1.01
1.3
1.75
2.83
4.06
5.49
8.7
12.42
18.17
1.16
1.60
2.17
2.77
3.74
4.69
7.18
13.43
17.85
26.04
Suffixes the following material code along with above
part number while sending your enquiries / orders.
Material
Code
SS316L
SS304
EL
I
Example
ETM-6L-10MED/EL
ETM-6L-10MED/I
The material SS316Ti are available on request
ADJUSTABLE BARREL TEE FITTINGS WITH SWIVEL NUT-EL
(for adaptions)
L1
L2
S2
L4
S3
L5
T
S2
O-Ring
T
M
SERIES
L-Light
PN 315
PN 160
S-Heavy
PN 630
PN 400
PN 315
Dimensions are in millimeters
TUBE
O. D.
T
M
6
8
10
12
15
18
22
28
35
42
6
8
10
12
14
16
20
25
30
38
M12x1.5
M14x1.5
M16x1.5
M18x1.5
M22x1.5
M26x1.5
M30x2
M36x2
M45x2
M52x2
M14x1.5
M16x1.5
M18x1.5
M20x1.5
M22x1.5
M24x1.5
M30x2
M36x2
M42x2
M52x2
L1
L2
L4
L5
S2
S3
27
29
30
32
36
40
44
47
56
63
31
32
34
38
40
43
48
54
62
72
12
14
15
17
21
23.5
27.5
30.5
34.5
40
16
17
17.5
21.5
22
24.5
26.5
30
35.5
41
53
56
59
61
69
75
82
89
107
119
58
59
64
69
75
79
93
104
117
135
26
27.5
29
29.5
32.5
35.5
38.5
41.5
51
56
27
27.5
30
31
35
36.5
44.5
50
55
63
14
17
19
22
27
32
36
41
50
60
17
19
22
24
27
30
36
46
50
60
12
12
14
17
19
24
27
36
41
50
12
14
17
19
19
24
27
36
41
50
O-Ring : Buna-N is standard
â
Viton are available on request
For Viton: Suffix code 'V' alongwith the part number of the fittings
Example : EL-6L/ELV
Dimension L1, L4 & L5 are approximate length with tightened nut.
The above part numbers are for complete fittings including Nut, Bite Ring and Body.
Only body without Nut and Bite Ring are available on request.
If you have requirements other than above size and Dimensions,
please contact us with complete details
Dimensions are for reference only and are subject to change without notice.
O-RING
SEALEXCEL
PART NO.
APPROX. WT.
Kg per 10 pcs.
4 x 1.5
6 x 1.5
7.5 x 1.5
9 x 1.5
12 x 2
15 x 2
20 x 2
26 x 2
30 x 2.5
38 x 2.5
4 x 1.5
6 x 1.5
7.5 x 1.5
9 x 1.5
10 x 2
12 x 2
16.3 x 2.4
20.3 x 2.4
25.3 x 2.4
33.3 x 2.4
EL-6L
EL-8L
EL-10L
EL-12L
EL-15L
EL-18L
EL-22L
EL-28L
EL-35L
EL-42L
EL-6S
EL-8S
EL-10S
EL-12S
EL-14S
EL-16S
EL-20S
EL-25S
EL-30S
EL-38S
0.58
0.79
1.00
1.34
2.33
3.32
4.43
7.02
9.45
14.63
0.91
1.18
1.64
2.07
2.81
3.82
5.83
1.078
13.80
20.51
Suffixes the following material code along with above
part number while sending your enquiries / orders.
Material
Code
SS316L
SS304
EL
I
Example
EL-6L/EL
EL-6L/I
The material SS316Ti are available on request
63
ADJUSTABLE BARREL TEE FITTINGS WITH SWIVEL NUT-ETR
MALE STUD THREAD : BSP (Parallel with ED Sealing)
L1
L2
S2
S3
L4
T
L5
S2
O-Ring
B1
S1
ED SEAL
BSP
D1
SERIES
L-Light
PN 315
PN 160
S-Heavy
PN 630
PN 400
PN 315
Dimensions are in millimeters
TUBE
O. D.
T
MALE STUD
THREAD
BSP
B1
D1
L1
L2
L4
L5
S1
S2
S3
6
8
10
12
15
18
22
28
35
42
6
8
10
12
14
16
20
25
30
38
1/8
1/4
1/4
3/8
1/2
1/2
3/4
1
1-1/4
1-1/2
1/4
1/4
3/8
3/8
1/2
1/2
3/4
1
1-1/4
1-1/2
8
12
12
12
14
14
16
18
20
22
12
12
12
12
14
14
16
18
20
22
14
19
19
22
27
27
32
41
50
55
19
19
22
22
27
27
32
40
50
55
27
29
30
32
36
40
44
47
56
63
31
32
34
38
40
43
48
54
62
72
12
14
15
17
21
23.5
27.5
30.5
34.5
40
16
17
17.5
21.5
22
24.5
26.5
30
35.5
41
61
66
70
74
82
90
99
106
125
138
71
74
79
86
94
98
113
127
141
161
34.5
37.5
40
42
46.5
50
55
59
68.5
75
40
42.5
45
48
54
55
65
73
78.5
89
14
19
19
22
27
27
32
41
50
55
19
19
22
22
27
27
32
41
50
55
14
17
19
22
27
32
36
41
50
60
17
19
22
24
27
30
36
46
50
60
12
12
14
17
19
24
27
36
41
50
12
14
17
19
19
24
27
36
41
50
ED Seal/O-Ring : Buna-N is standard
â
Viton are available on request
For Viton: Suffix code 'V' alongwith the part number of the fittings
Example : ETR-6L-2GED/ELV
Dimension L1, L4 & L5 is approximate length with tightened nut.
The above part numbers are for complete fittings including Nut, Bite Ring and Body.
Only body without Nut and Bite Ring are available on request.
If you have requirements other than above size and Dimensions,
please contact us with complete details
Dimensions are for reference only and are subject to change without notice.
64
SEALEXCEL
PART NO.
ETR-6L-2GED
ETR-8L-4GED
ETR-10L-4GED
ETR-12L-6GED
ETR-15L-8GED
ETR-18L-8GED
ETR-22L-12GED
ETR-28L-16GED
ETR-35L-20GED
ETR-42L-24GED
ETR-6S-4GED
ETR-8S-4GED
ETR-10S-6GED
ETR-12S-6GED
ETR-14S-8GED
ETR-16S-8GED
ETR-20S-12GED
ETR-25S-16GED
ETR-30S-20GED
ETR-38S-24GED
APPROX. WT.
Kg per 10 pcs.
0.71
1.06
1.27
1.75
2.83
4.03
5.46
8.72
12.16
18.06
1.26
1.59
2.19
2.70
3.77
4.74
7.32
13.44
17.99
26.14
Suffixes the following material code along with above
part number while sending your enquiries / orders.
Material
Code
SS316L
SS304
EL
I
Example
ETR-6L-2GED/EL
ETR-6L-2GED/I
The material SS316Ti are available on request
ADJUSTABLE BARREL TEE FITTINGS WITH SWIVEL NUT-ELM
MALE STUD THREAD : Metric (parallel with ED Sealing)
L1
L2
S2
S3
L4
T
L5
S2
O-Ring
B1
S1
ED-Seal
Metric
D1
SERIES
L-Light
PN 315
PN 160
S-Heavy
PN 630
PN 400
PN 315
Dimensions are in millimeters
TUBE
O. D.
T
MALE STUD
THREAD
METRIC
B1
D1
L1
L2
L4
L5
S1
S2
S3
6
8
10
12
15
18
22
28
35
42
6
8
10
12
14
16
20
25
30
38
M 10x1
M 12x1.5
M 14x1.5
M 16x1.5
M 18x1.5
M 22x1.5
M 26x1.5
M 33x2
M 42x2
M 48x2
M 12x1.5
M 14x1.5
M 16x1.5
M 18x1.5
M 20x1.5
M 22x1.5
M 27x2
M 33x2
M 42x2
M 48x2
8
12
12
12
12
14
16
18
20
22
12
12
12
12
14
14
16
18
20
22
14
17
19
22
24
27
32
41
50
55
17
19
22
24
27
27
32
40
50
55
27
29
30
32
36
40
44
47
56
63
31
32
34
38
40
43
48
54
62
72
12
14
15
17
21
23.5
27.5
30.5
34.5
40
16
17
17.5
21.5
22
24.5
26.5
30
35.5
41
61
66
70
74
83
90
99
106
125
138
71
74
79
86
94
98
113
127
141
161
34.5
37.5
40
42
46.5
50
55
59
68.5
75
40
42.5
45
48
54
55
65
73
78.5
89
14
17
19
22
24
27
32
41
50
55
17
19
22
24
27
27
32
41
50
55
14
17
19
22
27
32
36
41
50
60
17
19
22
24
27
30
36
46
50
60
12
12
14
17
19
24
27
36
41
50
12
14
17
19
19
24
27
36
41
50
ED Seal/O-Ring : Buna-N is standard
â
Viton are available on request
For Viton: Suffix code 'V' alongwith the part number of the fittings
Example : ELM-6L-10MED/ELV
Dimension L1, L4 & L5 is approximate length with tightened nut.
The above part numbers are for complete fittings including Nut, Bite Ring and Body.
Only body without Nut and Bite Ring are available on request.
If you have requirements other than above size and Dimensions,
please contact us with complete details
Dimensions are for reference only and are subject to change without notice.
SEALEXCEL
PART NO.
APPROX. WT.
Kg per 100 pcs.
ELM-6L-10MED
ELM-8L-12MED
ELM-10L-14MED
ELM-12L-16MED
ELM-15L-18MED
ELM-18L-22MED
ELM-22L-26MED
ELM-28L-33MED
ELM-35L-42MED
ELM-42L-48MED
ELM-6S-12MED
ELM-8S-14MED
ELM-10S-16MED
ELM-12S-18MED
ELM-14S-20MED
ELM-16S-22MED
ELM-20S-27MED
ELM-25S-33MED
ELM-30S-42MED
ELM-38S-48MED
0.71
1.00
1.27
1.74
3.04
4.06
5.46
8.70
12.16
18.19
1.20
1.60
2.19
2.78
3.74
4.78
7.33
13.42
18.03
26.20
Suffixes the following material code along with above
part number while sending your enquiries / orders.
Material
Code
SS316L
SS304
EL
I
Example
ELM-6L-10MED/EL
ELM-6L-10MED/I
The material SS316Ti are available on request
65
HIGH PRESSURE BANJO FITTINGS - WHR
MALE STUD THREAD : BSP (Parallel with Soft Seal KD to DIN 3852/d4)
L1
S6
O-Ring
L2
S2
L3
S3
H
B1
L4
T
Soft Seal KD
BSP
D4
SERIES
L-Light
PN 315
PN 160
S-Heavy
PN 400
PN 250
MALE
TUBE
STUD
O. D.
THREAD
T
BSP
6
1/8
8
1/4
10
1/4
12
3/8
15
1/2
18
1/2
22
3/4
28
1
35 1-1/4
42 1-1/2
6
1/4
8
1/4
10
3/8
12
3/8
14
1/2
16
1/2
20
3/4
25
1
30 1-1/4
38 1-1/2
Dimensions are in millimeters
B1
D4
H
L1
L2
L3
L4
S2
S3
S6
RTT
in
Nm
8
12
12
12
14
14
16
18
20
22
12
12
12
12
14
14
16
18
20
22
17
22
22
27
32
32
41
46
57
64
22
22
27
27
32
32
41
46
57
64
2.5
3.0
3.0
3.0
4.5
4.5
3.5
3.5
3.5
3.5
3.0
3.0
3.0
3.0
4.5
4.5
3.5
3.5
3.5
3.5
27
29
30
33
37
37
44
49
58
63
31
31
35
35
40
40
48
56
64
72
12
14.5
15.5
18
21.5
21
27.5
32
36
40.5
16.5
16.5
18.5
18.5
22.5
22
26.5
31.5
37
41.5
24
30
30
36
45
45
53
66
76
87
30
30
36
36
45
45
53
66
76
87
10.5
14
14
16.5
21.5
21.5
24
30.5
35.5
40.5
14
14
16.5
16.5
21.5
21.5
24
30.5
35.5
40.5
14
17
19
22
27
32
36
41
50
60
17
19
22
24
27
30
36
46
50
60
17
22
22
27
32
32
41
50
60
70
22
22
27
27
32
32
41
50
60
70
17
19
19
24
30
30
36
46
55
60
19
19
24
24
30
30
36
46
55
60
20
50
50
75
130
130
250
350
600
800
50
50
75
75
130
130
250
350
600
800
RTT- Recommended tightening torque for male stud BSP
O-Ring : Buna-N is standard
â
Viton are available on request
For Viton: Suffix code 'V' alongwith the part number of the fittings
Example : WHR-6L-2GKD/ELV
Soft Seal : PTFE
Dimension L1 is approximate length with tightened nut.
The above part numbers are for complete fittings including Nut, Bite Ring and Body.
Only body without Nut and Bite Ring are available on request.
If you have requirements other than above size and Dimensions,
please contact us with complete details
Dimensions are for reference only and are subject to change without notice.
66
SEALEXCEL
PART NO.
APPROX. WT.
Kg per 10 pcs.
WHR-6L-2GKD
WHR-8L-4GKD
WHR-10L-4GKD
WHR-12L-6GKD
WHR-15L-8GKD
WHR-18L-8GKD
WHR-22L-12GKD
WHR-28L-16GKD
WHR-35L-20GKD
WHR-42L-24GKD
WHR-6S-4GKD
WHR-8S-4GKD
WHR-10S-6GKD
WHR-12S-6GKD
WHR-14S-8GKD
WHR-16S-8GKD
WHR-20S-12GKD
WHR-25S-16GKD
WHR-30S-20GKD
WHR-38S-24GKD
0.54
1.19
1.25
2.10
3.65
3.90
6.77
11.35
16.77
24.77
1.27
1.31
2.22
2.28
3.80
3.99
7.03
12.92
17.77
29.48
Suffixes the following material code along with above
part number while sending your enquiries / orders.
Material
Code
Example
SS316L
SS304
EL
I
WHR-6L-2GKD/EL
WHR-6L-2GKD/I
The material SS316Ti are available on request
HIGH PRESSURE BANJO FITTINGS - WHM
MALE STUD THREAD : metric (parallel with soft seal KD to DIN 3852/d4)
L1
S6
O-Ring
S2
L2
L3
S3
H
B1
L4
T
Soft Seal KD
Metric
D4
SERIES
L-Light
PN 315
PN 160
S-Heavy
PN 400
PN 250
TUBE MALE STUD
O. D. THREAD
METRIC
T
6
8
10
12
15
18
22
28
35
42
6
8
10
12
14
16
20
25
30
38
M10x1
M12x1.5
M14x1.5
M16x1.5
M18x1.5
M22x1.5
M26x1.5
M33x2
M42x2
M48x2
M12x1.5
M14x1.5
M16x1.5
M18x1.5
M20x1.5
M22x1.5
M27x2
M33x2
M42x2
M48x2
Dimensions are in millimeters
B1
D4
H
L1
L2
L3
L4
S2
S3
S6
RTT
in
Nm
8
12
12
12
12
14
16
18
20
22
12
12
12
12
14
14
16
18
20
22
17
22
22.5
27
29
32
41
46
57
64
22
22.5
27
29
32
32
41
46
57
64
2.5
3.0
3.0
3.0
3.0
4.5
3.5
3.5
3.5
3.5
3.0
3.0
3.0
3.0
3.0
4.5
3.5
3.5
3.5
3.5
27
29
30
33
36
37
44
49
58
63
31
31
35
36
40
40
48
56
64
72
12
14.5
15.5
18
20.5
21
27.5
32
36
40.5
16.5
16.5
18.5
20
22.5
22
26.5
31.5
37
41.5
24
30
30
36
39.5
45
53
66
76
87
30
30
36
39.5
43.5
45
53
66
76
87
10.5
14
14
16.5
18.5
21.5
24
30.5
35.5
40.5
14
14
16.5
18.5
20
21.5
24
30.5
35.5
40.5
14
17
19
22
27
32
36
41
50
60
17
19
22
24
27
30
36
46
50
60
17
22
22
27
32
32
41
50
60
70
22
22
27
27
32
32
41
50
60
70
17
19
19
24
27
30
36
46
55
60
19
19
24
27
30
30
36
46
55
60
25
50
60
90
110
150
350
400
600
800
50
60
90
110
130
150
350
400
600
800
RTT = Recommended tightening torques for male stud Metric
O-Ring : Buna-N is standard
â
Viton are available on request
For Viton: Suffix code 'V' alongwith the part number of the fittings
Example : WHM-6L-10MKD/ELV
Soft Seal : PTFE
Dimension L1 is approximate length with tightened nut.
The above part numbers are for complete fittings including Nut, Bite Ring and Body.
Only body without Nut and Bite Ring are available on request.
If you have requirements other than above size and Dimensions,
please contact us with complete details
Dimensions are for reference only and are subject to change without notice.
SEALEXCEL
PART NO.
APPROX. WT.
Kg per 10 pcs.
WHM-6L-10MKD
WHM-8L-12MKD
WHM-10L-14MKD
WHM-12L-16MKD
WHM-15L-18MKD
WHM-18L-22MKD
WHM-22L-26MKD
WHM-28L-33MKD
WHM-35L-42MKD
WHM-42L-48MKD
WHM-6S-12MKD
WHM-8S-14MKD
WHM-10S-16MKD
WHM-12S-18MKD
WHM-14S-20MKD
WHM-16S-22MKD
WHM-20S-27MKD
WHM-25S-33MKD
WHM-30S-42MKD
WHM-38S-48MKD
0.66
1.16
1.27
2.07
2.88
3.93
6.70
11.11
16.77
25.17
1.25
1.33
2.20
2.83
3.78
3.98
6.99
12.68
17.76
29.87
Suffixes the following material code along with above
part number while sending your enquiries / orders.
Material
Code
Example
SS316L
SS304
EL
I
WHM-6L-10MKD/EL
WHM-6L-10MKD/I
The material SS316Ti are available on request
67
HIGH PRESSURE BANJO FITTINGS - WHR
MALE STUD THREAD : BSP (Parallel with Metal Seal Ring DKA to DIN 3852/d4)
L1
S6
L2
O-Ring
S2
L3
S3
H
B1
L4
T
Metal Seal Ring DKA
BSP
D3
SERIES
L-Light
PN 315
PN 160
S-Heavy
PN 400
PN 250
MALE
TUBE
STUD
O. D.
THREAD
T
BSP
6
1/8
8
1/4
10
1/4
12
3/8
15
1/2
18
1/2
22
3/4
28
1
35
1-1/4
42
1-1/2
6
1/4
8
1/4
10
3/8
12
3/8
14
1/2
16
1/2
20
3/4
25
1
30
1-1/4
38
1-1/2
Dimensions are in millimeters
B1
D3
H
L1
L2
L3
L4
S2
S3
S6
RTT
in
Nm
8
12
12
12
14
14
16
18
20
22
12
12
12
12
14
14
16
18
20
22
14
18
18
22
26
26
32
39
49
55
18
18
22
22
26
26
32
39
49
55
2.5
3.0
3.0
3.0
4.5
4.5
3.5
3.5
3.5
3.5
3.0
3.0
3.0
3.0
4.5
4.5
3.5
3.5
3.5
3.5
27
29
30
33
37
37
44
49
58
63
31
31
35
35
40
40
48
56
64
72
12
14.5
15.5
18
21.5
21
27.5
32
36
40.5
16.5
16.5
18.5
18.5
22.5
22
26.5
31.5
37
41.5
24
30
30
36
45
45
53
66
76
87
30
30
36
36
45
45
53
66
76
87
10.5
14
14
16.5
21.5
21.5
24
30.5
35.5
40.5
14
14
16.5
16.5
21.5
21.5
24
30.5
35.5
40.5
14
17
19
22
27
32
36
41
50
60
17
19
22
24
27
30
36
46
50
60
17
22
22
27
32
32
41
50
60
70
22
22
27
27
32
32
41
50
60
70
17
19
19
24
30
30
36
46
55
60
19
19
24
24
30
30
36
46
55
60
20
50
50
75
130
130
250
350
600
800
50
50
75
75
130
130
250
350
600
800
RTT- Recommended tightening torque for male stud BSP
O-Ring : Buna-N is standard
â
Viton are available on request
For Viton: Suffix code 'V' alongwith the part number of the fittings
Example : WHR-6L-2GDKA/ELV
Dimension L1 is approximate length with tightened nut.
The above part numbers are for complete fittings including Nut, Bite Ring and Body.
Only body without Nut and Bite Ring are available on request.
If you have requirements other than above size and Dimensions,
please contact us with complete details
Dimensions are for reference only and are subject to change without notice.
68
SEALEXCEL
PART NO.
APPROX. WT.
Kg per 10 pcs.
WHR-6L-2GDKA
WHR-8L-4GDKA
WHR-10L-4GDKA
WHR-12L-6GDKA
WHR-15L-8GDKA
WHR-18L-8GDKA
WHR-22L-12GDKA
WHR-28L-16GDKA
WHR-35L-20GDKA
WHR-42L-24GDKA
WHR-6S-4GDKA
WHR-8S-4GDKA
WHR-10S-6GDKA
WHR-12S-6GDKA
WHR-14S-8GDKA
WHR-16S-8GDKA
WHR-20S-12GDKA
WHR-25S-16GDKA
WHR-30S-20GDKA
WHR-38S-24GDKA
0.64
1.17
1.23
2.07
3.59
3.84
6.66
11.27
16.63
24.59
1.26
1.29
2.20
2.25
3.75
3.93
6.92
12.84
17.63
29.30
Suffixes the following material code along with above
part number while sending your enquiries / orders.
Material
Code
Example
SS316L
EL WHR-6L-2GDKA/EL
SS304
WHR-6L-2GDKA/I
I
The material SS316Ti are available on request
HIGH PRESSURE BANJO FITTINGS - WHM
MALE STUD THREAD : metric (parallel with metal seal ring DKA to DIN 3852/d4)
L1
S6
O-Ring
S2
L2
L3
S3
H
B1
L4
T
Metal Seal Ring DKA
Metric
D3
SERIES
L-Light
PN 315
PN160
S-Heavy
PN 400
PN 250
TUBE MALE STUD
O. D. THREAD
METRIC
T
6
8
10
12
15
18
22
28
35
42
6
8
10
12
14
16
20
25
30
38
M10x1
M12x1.5
M14x1.5
M16x1.5
M18x1.5
M22x1.5
M26x1.5
M33x2
M42x2
M48x2
M12x1.5
M14x1.5
M16x1.5
M18x1.5
M20x1.5
M22x1.5
M27x2
M33x2
M42x2
M48x2
Dimensions are in millimeters
B1
D3
H
L1
L2
8
12
12
12
12
14
16
18
20
22
12
12
12
12
14
14
16
18
20
22
14
17
19
21
23
27
31
39
49
55
17
19
21
23
25
27
32
39
49
55
2.5
3.0
3.0
3.0
3.0
4.5
3.5
3.5
3.5
3.5
3.0
3.0
3.0
3.0
3.0
4.5
3.5
3.5
3.5
3.5
27
29
30
33
36
37
44
49
58
63
31
31
35
36
40
40
48
56
64
72
12
14.5
15.5
18
20.5
21
27.5
32
36
40.5
16.5
16.5
18.5
20
22.5
22
26.5
31.5
37
41.5
L3
24
30
30
36
39.5
45
53
66
76
87
30
30
36
39.5
43.5
45
53
66
76
87
L4
S2
S3
S6
RTT
in
Nm
10.5
14
14
16.5
18.5
21.5
24
30.5
35.5
40.5
14
14
16.5
18.5
20
21.5
24
30.5
35.5
40.5
14
17
19
22
27
32
36
41
50
60
17
19
22
24
27
30
36
46
50
60
17
22
22
27
32
32
41
50
60
70
22
22
27
27
32
32
41
50
60
70
17
19
19
24
27
30
36
46
55
60
19
19
24
27
30
30
36
46
55
60
25
50
60
90
110
150
350
400
600
800
50
60
90
110
130
150
350
400
600
800
RTT = Recommended tightening torques for male stud Metric
O-Ring : Buna-N is standard
â
Viton are available on request
For Viton: Suffix code 'V' alongwith the part number of the fittings
Example : WHM-6L-10MDKA/ELV
Dimension L1 is approximate length with tightened nut.
The above part numbers are for complete fittings including Nut, Bite Ring and Body.
Only body without Nut and Bite Ring are available on request.
If you have requirements other than above size and Dimensions,
please contact us with complete details
Dimensions are for reference only and are subject to change without notice.
SEALEXCEL
PART NO.
APPROX. WT.
Kg per 10 pcs.
WHM-6L-10MDKA
WHM-8L-12MDKA
WHM-10L-14MDKA
WHM-12L-16MDKA
WHM-15L-18MDKA
WHM-18L-22MDKA
WHM-22L-26MDKA
WHM-28L-33MDKA
WHM-35L-42MDKA
WHM-42L-48MDKA
WHM-6S-12MDKA
WHM-8S-14MDKA
WHM-10S-16MDKA
WHM-12S-18MDKA
WHM-14S-20MDKA
WHM-16S-22MDKA
WHM-20S-27MDKA
WHM-25S-33MDKA
WHM-30S-42MDKA
WHM-38S-48MDKA
0.65
1.14
1.25
2.03
2.85
3.88
6.58
11.03
16.63
25.0
1.22
1.32
21.17
2.80
3.74
3.94
6.88
12.60
17.63
29.70
Suffixes the following material code along with above
part number while sending your enquiries / orders.
Material
SS316L
SS304
Code
Example
EL WHM-6L-10MDKA/EL
I WHM-6L-10MDKA/I
The material SS316Ti are available on request
69
HIGH PRESSURE BANJO TEE FITTINGS-THR
MALE STUD THREAD : BSP (parallel with soft seal KD to DIN 3852/d4)
L1
S6
O-Ring
S2
L2
L3
S3
H
B1
L4
T
Soft Seal KD
BSP
D4
MALE
TUBE
STUD
O. D.
SERIES
THREAD
T
BSP
6
1/8
8
1/4
L-Light
10
1/4
PN 315
12
3/8
15
1/2
18
1/2
22
3/4
28
1
PN 160
35
1-1/4
42
1-1/2
6
1/4
8
1/4
10
3/8
S-Heavy
12
3/8
PN 400
14
1/2
16
1/2
20
3/4
25
1
PN 250
30
1-1/4
38
1-1/2
Dimensions are in millimeters
B1
D4
H
L1
L2
L3
L4
S2
S3
S6
RTT
in
Nm
8
12
12
12
14
14
16
18
20
22
12
12
12
12
14
14
16
18
20
22
17
22
22
27
32
32
41
46
57
64
22
22
27
27
32
32
41
46
57
64
2.5
3.0
3.0
3.0
4.5
4.5
3.5
3.5
3.5
3.5
3.0
3.0
3.0
3.0
4.5
4.5
3.5
3.5
3.5
3.5
27
29
30
33
37
37
44
49
58
63
31
31
35
35
40
40
48
56
64
72
12
14.5
15.5
18
21.5
21
27.5
32
36
40.5
16.5
16.5
18.5
18.5
22.5
22
26.5
31.5
37
41.5
24
30
30
36
45
45
53
66
76
87
30
30
36
36
45
45
53
66
76
87
10.5
14
14
16.5
21.5
21.5
24
30.5
35.5
40.5
14
14
16.5
16.5
21.5
21.5
24
30.5
35.5
40.5
14
17
19
22
27
32
36
41
50
60
17
19
22
24
27
30
36
46
50
60
17
22
22
27
32
32
41
50
60
70
22
22
27
27
32
32
41
50
60
70
17
19
19
24
30
30
36
46
55
60
19
19
24
24
30
30
36
46
55
60
20
50
50
75
130
130
250
350
600
800
50
50
75
75
130
130
250
350
600
800
RTT = Recommended tightening torques for male stud BSP
O-Ring : Buna-N is standard
â
Viton are available on request
For Viton: Suffix code 'V' alongwith the part number of the fittings
Example : THR-6L-2GKD/ELV
Soft Seal : PTFE
Dimension L1 is approximate length with tightened nut.
The above part numbers are for complete fittings including Nut, Bite Ring and Body.
Only body without Nut and Bite Ring are available on request.
If you have requirements other than above size and Dimensions,
please contact us with complete details
Dimensions are for reference only and are subject to change without notice.
70
SEALEXCEL
PART NO.
APPROX. WT.
Kg per 10 pcs.
THR-6L-2GKD
THR-8L-4GKD
THR-10L-4GKD
THR-12L-6GKD
THR-15L-8GKD
THR-18L-8GKD
THR-22L-12GKD
THR-28L-16GKD
THR-35L-20GKD
THR-42L-24GKD
THR-6S-4GKD
THR-8S-4GKD
THR-10S-6GKD
THR-12S-6GKD
THR-14S-8GKD
THR-16S-8GKD
THR-20S-12GKD
THR-25S-16GKD
THR-30S-20GKD
THR-38S-24GKD
0.81
1.42
1.52
2.43
4.15
4.64
7.70
12.62
20.74
30.08
1.53
1.66
2.67
2.81
4.52
4.96
8.52
15.59
23.14
33.9
Suffixes the following material code along with above
part number while sending your enquiries / orders.
Material
Example
Code
THR-6L-2GKD/EL
SS316L
EL
SS304
THR-6L-2GKD/I
I
The material SS316Ti are available on request
HIGH PRESSURE BANJO FITTINGS - THM
MALE STUD THREAD : Metric (parallel with soft seal KD to DIN 3852/d4)
L1
S6
L2
O-Ring
S2
L3
S3
B1
H
L4
T
Soft Seal KD
Metric
D4
SERIES
L-Light
PN 315
PN 160
S-Heavy
PN 400
PN 250
S3 S6
RTT
in
Nm
SEALEXCEL
PART NO.
APPROX. WT.
Kg per 10 pcs.
8 17 2.5 27 12
24 10.5 14 17 17
12 22 3.0 29 14.5 30
14 17 22 19
12 22.5 3.0 30 15.5 30
14 19 22 19
12 27 3.0 33 18
36 16.5 22 27 24
12 29 3.0 36 20.5 39.5 18.5 27 32 30
14 32 4.5 37 21
45 21.5 32 32 30
16 41 3.5 44 27.5 53
24 36 41 36
18 46 3.5 49 32
66 30.5 41 50 46
20 57 3.5 58 36
76 35.5 50 60 55
22 64 3.5 63 40.5 87 40.5 60 70 60
12 22 3.0 31 16.5 30
14 17 22 19
12 22.5 3.0 31 16.5 30
14 19 22 19
12 27 3.0 35 18.5 36 16.5 22 27 24
12 29 3.0 36 18.5 39.5 18.5 24 30 27
14 32 3.0 40 22.5 43.5 20 27 32 30
14 32 4.5 40 22
45 21.5 30 32 30
16 41 3.5 48 26.5 53
24 36 41 36
18 46 3.5 56 31.5 66 30.5 46 50 46
20 57 3.5 64 37
76 35.5 50 60 55
22 64 3.5 72 41.5 87 40.5 60 70 60
25
50
60
90
110
150
350
400
600
800
50
60
90
110
130
150
350
400
600
800
THM-6L-10MKD
THM-8L-12MKD
THM-10L-14MKD
THM-12L-16MKD
THM-15L-18MKD
THM-18L-22MKD
THM-22L-26MKD
THM-28L-33MKD
THM-35L-42MKD
THM-42L-48MKD
THM-6S-12MKD
THM-8S-14MKD
THM-10S-16MKD
THM-12S-18MKD
THM-14S-20MKD
THM-16S-22MKD
THM-20S-27MKD
THM-25S-33MKD
THM-30S-42MKD
THM-38S-48MKD
0.81
1.4
1.54
2.4
3.47
4.68
7.72
12.38
20.74
30.48
1.51
1.68
2.65
3.35
4.48
4.92
8.48
15.35
23.13
34.3
Dimensions are in millimeters
TUBE
O. D.
T
MALE STUD
THREAD
METRIC
B1
6
8
10
12
15
18
22
28
35
42
6
8
10
12
14
16
20
25
30
38
M 10 x 1
M 12 x 1.5
M 14 x 1.5
M 16 x 1.5
M 18 x 1.5
M 22 x 1.5
M 26 x 1.5
M 33 x 2
M 42 x 2
M 48 x 2
M 12 x 1.5
M 14 x 1.5
M 16 x 1.5
M 18 x 1.5
M 20 x 1.5
M 22 x 1.5
M 27 x 1.5
M 33 x 2
M 42 x 2
M 48 x 2
D4
H
L1
L2
L3
L4
S2
RTT = Recommended tightening torques for male stud Metric
O-Ring : Buna-N is standard
â
Viton are available on request
For Viton: Suffix code 'V' alongwith the part number of the fittings
Example : THM-6L-10MKD/ELV
Soft Seal PTFE
Dimension L1 is approximate length with tightened nut.
The above part numbers are for complete fittings including Nut, Bite Ring and Body.
Only body without Nut and Bite Ring are available on request.
If you have requirements other than above size and Dimensions,
please contact us with complete details
Dimensions are for reference only and are subject to change without notice.
Suffixes the following material code along with above
part number while sending your enquiries / orders.
Material
Code
SS316L
SS304
EL
I
Example
THM-6L-10MKD/EL
THM-6L-10MKD/I
The material SS316Ti are available on request
71
HIGH PRESSURE BANJO TEE FITTINGS-THR
MALE STUD THREAD : BSP (parallel Metal Seal Ring DKA to DIN 3852/d4)
L1
S6
O-Ring
S2
L2
L3
S3
H
B1
L4
T
Metal Seal Ring DKA
BSP
D3
MALE
TUBE
STUD
O. D.
SERIES
THREAD
T
BSP
6
1/8
8
1/4
L-Light
10
1/4
PN 315
12
3/8
15
1/2
18
1/2
22
3/4
1
28
PN 160
1-1/4
35
1-1/2
42
1/4
6
1/4
8
3/8
10
S-Heavy
3/8
12
PN 400
14
1/2
16
1/2
20
3/4
25
1
PN 250
30
1-1/4
38
1-1/2
Dimensions are in millimeters
B1
D3
H
L1
L2
L3
L4
S2
S3
S6
RTT
in
Nm
8
12
12
12
14
14
16
18
20
22
12
12
12
12
14
14
16
18
20
22
14
18
18
22
26
26
32
39
49
55
18
18
22
22
26
26
32
39
49
55
2.5
3.0
3.0
3.0
4.5
4.5
3.5
3.5
3.5
3.5
3.0
3.0
3.0
3.0
4.5
4.5
3.5
3.5
3.5
3.5
27
29
30
33
37
37
44
49
58
63
31
31
35
35
40
40
48
56
64
72
12
14.5
15.5
18
21.5
21
27.5
32
36
40.5
16.5
16.5
18.5
18.5
22.5
22
26.5
31.5
37
41.5
24
30
30
36
45
45
53
66
76
87
30
30
36
36
45
45
53
66
76
87
10.5
14
14
16.5
21.5
21.5
24
30.5
35.5
40.5
14
14
16.5
16.5
21.5
21.5
24
30.5
35.5
40.5
14
17
19
22
27
32
36
41
50
60
17
19
22
24
27
30
36
46
50
60
17
22
22
27
32
32
41
50
60
70
22
22
27
27
32
32
41
50
60
70
17
19
19
24
30
30
36
46
55
60
19
19
24
24
30
30
36
46
55
60
20
50
50
75
130
130
250
350
600
800
50
50
75
75
130
130
250
350
600
800
RTT = Recommended tightening torques for male stud BSP
O-Ring : Buna-N is standard
â
Viton are available on request
For Viton: Suffix code 'V' alongwith the part number of the fittings
Example : THR-6L-2GDKA/ELV
Dimension L1 is approximate length with tightened nut.
The above part numbers are for complete fittings including Nut, Bite Ring and Body.
Only body without Nut and Bite Ring are available on request.
If you have requirements other than above size and Dimensions,
please contact us with complete details
Dimensions are for reference only and are subject to change without notice.
72
SEALEXCEL
PART NO.
APPROX. WT.
Kg per 10 pcs.
THR-6L-2GDKA
THR-8L-4GDKA
THR-10L-4GDKA
THR-12L-6GDKA
THR-15L-8GDKA
THR-18L-8GDKA
THR-22L-12GDKA
THR-28L-16GDKA
THR-35L-20GDKA
THR-42L-24GDKA
THR-6S-4GDKA
THR-8S-4GDKA
THR-10S-6GDKA
THR-12S-6GDKA
THR-14S-8GDKA
THR-16S-8GDKA
THR-20S-12GDKA
THR-25S-16GDKA
THR-30S-20GDKA
THR-38S-24GDKA
0.81
1.38
1.53
2.37
3.43
4.64
7.70
12.30
20.60
30.30
1.48
1.66
2.62
3.31
4.43
4.87
8.37
15.26
23.00
3.42
Suffixes the following material code along with above
part number while sending your enquiries / orders.
Material
Code
SS316L
SS304
EL
I
Example
THR-6L-2GDKA/EL
THR-6L-2GDKA/I
The material SS316Ti are available on request
HIGH PRESSURE BANJO FITTINGS - THM
MALE STUD THREAD : Metric (parallel with metal seal DKA to DIN 3852/d4)
L1
S6
O-Ring
S2
L2
L3
S3
H
B1
L4
T
Metal Seal Ring DKA
Metric
D3
SERIES
L-Light
PN 315
PN 160
S-Heavy
PN 400
PN 250
Dimensions are in millimeters
TUBE
O. D.
T
MALE STUD
THREAD
METRIC
B1
D3
H
L1
L2
6
8
10
12
15
18
22
28
35
42
6
8
10
12
14
16
20
25
30
38
M 10 x 1
M 12 x 1.5
M 14 x 1.5
M 16 x 1.5
M 18 x 1.5
M 22 x 1.5
M 26 x 1.5
M 33 x 2
M 42 x 2
M 48 x 2
M 12 x 1.5
M 14 x 1.5
M 16 x 1.5
M 18 x 1.5
M 20 x 1.5
M 22 x 1.5
M 27 x 1.5
M 33 x 2
M 42 x 2
M 48 x 2
8
12
12
12
12
14
16
18
20
22
12
12
12
12
14
14
16
18
20
22
14
17
19
21
23
27
31
39
49
5
17
19
21
23
25
27
32
39
49
55
2.5
3.0
3.0
3.0
3.0
4.5
3.5
3.5
3.5
3.5
3.0
3.0
3.0
3.0
3.0
4.5
3.5
3.5
3.5
3.5
27
29
30
33
36
37
44
49
58
63
31
31
35
36
40
40
48
56
64
72
S6
RTT
in
Nm
SEALEXCEL
PART NO.
APPROX. WT.
Kg per 10 pcs.
12
24 10.5 14 17 17
14.5 30
14 17 22 19
15.5 30
14 19 22 19
36 16.5 22 27 24
18
20.5 39.5 18.5 27 32 30
45 21.5 32 32 30
21
27.5 53
24 36 41 36
66 30.5 41 50 46
32
76 35.5 50 60 55
36
40.5 87 40.5 60 70 60
16.5 30
14 17 22 19
16.5 30
14 19 22 19
18.5 36 16.5 22 27 24
18.5 39.5 18.5 24 30 27
22.5 43.5 20 27 32 30
45 21.5 30 32 30
22
26.5 53
24 36 41 36
31.5 66 30.5 46 50 46
76 35.5 50 60 55
37
41.5 87 40.5 60 70 60
25
50
60
90
110
150
350
400
600
800
50
60
90
110
130
150
350
400
600
800
THM-6L-10MDKA
THM-8L-12MDKA
THM-10L-14MDKA
THM-12L-16MDKA
THM-15L-18MDKA
THM-18L-22MDKA
THM-22L-26MDKA
THM-28L-33MDKA
THM-35L-42MDKA
THM-42L-48MDKA
THM-6S-12MDKA
THM-8S-14MDKA
THM-10S-16MDKA
THM-12S-18MDKA
THM-14S-20MDKA
THM-16S-22MDKA
THM-20S-27MDKA
THM-25S-33MDKA
THM-30S-42MDKA
THM-38S-48MDKA
0.81
1.4
1.54
2.4
3.47
4.68
7.72
12.38
20.74
30.48
1.51
1.68
2.65
3.35
4.48
4.92
8.48
15.35
23.13
34.3
L3
L4
S2
RTT = Recommended tightening torques for male stud Metric
O-Ring : Buna-N is standard
â
Viton are available on request
For Viton: Suffix code 'V' alongwith the part number of the fittings
Example : THM-6L-10MDKA/ELV
Dimension L1 is approximate length with tightened nut.
The above part numbers are for complete fittings including Nut, Bite Ring and Body.
Only body without Nut and Bite Ring are available on request.
If you have requirements other than above size and Dimensions,
please contact us with complete details
Dimensions are for reference only and are subject to change without notice.
S3
Suffixes the following material code along with above
part number while sending your enquiries / orders.
Material
Code
SS316L
SS304
EL
I
Example
THM-6L-10MDKA/EL
THM-6L-10MDKA/I
The material SS316Ti are available on request
73
WELD FITTINGS - AS
S1
S2
D4
T
L2
L1
SERIES
L-Light
PN 315
PN160
S-Heavy
PN 630
PN 400
PN 315
TUBE
O. D.
T
D4
L1
L2
S1
S2
6
8
10
12
15
18
22
28
35
42
6
8
10
12
14
16
20
25
30
38
10
12
14
16
19
22
27
32
40
46
11
13
15
17
19
21
26
31
36
44
29
31
33
33
37
40
45
47
54
58
34
36
39
41
45
45
51
56
62
69
14
16
18
18
22
23.5
28.5
30.5
32.5
35
19
21
22.5
24.5
27
26.5
29.5
32
35.5
38
12
14
17
19
22
27
32
41
46
55
14
17
19
22
24
27
32
41
46
55
14
17
19
22
27
32
36
41
50
60
17
19
22
24
27
30
36
46
50
60
Dimensions are in millimeters
Dimension L1 is approximate length with tightened nut.
The above part numbers are for complete fittings including Nut, Bite Ring and Body.
Only body without Nut and Bite Ring are available on request.
If you have requirements other than above size and Dimensions,
please contact us with complete details
Dimensions are for reference only and are subject to change without notice.
SEALEXCEL
PART NO.
APPROX. WT.
Kg per 10 pcs.
AS-6L
AS-8L
AS-10L
AS-12L
AS-15L
AS-18L
AS-22L
AS-28L
AS-35L
AS-42L
AS-6S
AS-8S
AS-10S
AS-12S
AS-14S
AS-16S
AS-20S
AS-25S
AS-30S
AS-38S
0.22
0.31
0.42
0.54
0.88
1.30
1.84
2.65
3.86
5.60
0.39
0.53
0.73
0.92
1.24
1.51
2.41
2.41
4.38
7.89
Suffixes the following material code along with above
part number while sending your enquiries / orders.
Material
Code
SS316L
SS304
EL
I
Example
AS-6L/EL
AS-6L/I
The material SS316Ti are available on request
74
WELD NIPPLES-SKA
SERIES : S- Heavy
T
D2
30 O
L1
SERIES
S-HEAVY
MAX. PRESSURE
PN
249
358
460
305
393
476
234
305
372
435
249
305
358
460
294
379
460
249
323
393
460
261
319
375
429
TUBE
O. D.
T
SEAMLESS
STEEL
ST. 35.4 NBK
10
10
10
12
12
12
16
16
16
16
20
20
20
20
25
25
25
30
30
30
30
38
38
38
38
10 x 1
10 x 1.5
10 x 2
12 x 1.5
12 x 2
12 x 2.5
16 x 1.5
16 x 2
16 x 2.5
16 x 3
20 x 2
20 x 2.5
20 x 3
20 x 4
25 x 3
25 x 4
25 x 5
30 x 3
30 x 4
30 x 5
30 x 6
38 x 4
38 x 5
38 x 6
38 x 7
Dimensions are in millimeters
D2
L1
8
7
6
9
8
7
13
12
11
10
16
15
14
12
19
17
15
24
22
20
18
30
28
26
24
32.5
32.5
32.5
32.5
32.5
32.5
39
39
39
39
45
45
45
45
49.5
49.5
49.5
52
52
52
52
56.5
56.5
56.5
56.5
O-Ring : Buna-N is standard
â
Viton are available on request
For Viton: Suffix code 'V' alongwith the part number of the fittings
Example : SKA-10-8/ELV
If you have requirements other than above size and Dimensions,
please contact us with complete details
Dimensions are for reference only and are subject to change without notice.
O-RINGS
SEALEXCEL
PART NO.
APPROX. WT.
Kg per 10 pcs.
7.5 x 1.5
7.5 x 1.5
7.5 x 1.5
9 x 1.5
9 x 1.5
9 x 1.5
12 x 2
12 x 2
12 x 2
12 x 2
16.3 x 2.4
16.3 x 2.4
16.3 x 2.4
16.3 x 2.4
20.3 x 2.4
20.3 x 2.4
20.3 x 2.4
25.3 x 2.4
25.3 x 2.4
25.3 x 2.4
25.3 x 2.4
33.3 x 2.4
33.3 x 2.4
33.3 x 2.4
33.3 x 2.4
SKA-10-8
SKA-10-7
SKA-10-6
SKA-12-9
SKA-12-8
SKA-12-7
SKA-16-13
SKA-16-12
SKA-16-11
SKA-16-10
SKA-20-16
SKA-20-15
SKA-20-14
SKA-20-12
SKA-25-19
SKA-25-17
SKA-25-15
SKA-30-24
SKA-30-22
SKA-30-26
SKA-30-18
SKA-38-30
SKA-38-28
SKA-38-26
SKA-38-24
0.10
0.13
0.15
0.15
10.9
0.22
0.27
0.31
0.36
0.41
0.54
0.57
0.62
0.78
0.89
1.11
1.25
1.35
1.40
1.66
1.71
1.95
2.36
2.70
2.86
Suffixes the following material code along with above
part number while sending your enquiries / orders.
Material
Code
SS316L
SS304
EL
I
Example
SKA-10-8/EL
SKA-10-8/I
The material SS316Ti are available on request
75
SPECIAL WELD NIPPLES (REDUCERS)-SKAR
G3
SERIES : S- Heavy
L1
O-Ring
SERIES
S-HEAVY
MAX. PRESSURE
PN
528
528
528
358
476
476
435
435
460
305
305
294
305
305
294
323
T1
10
10
12
12
16
20
20
25
25
30
30
30
38
38
38
38
TUBE
O. D.
T1
L2
Dimensions are in millimeters
T2
D2
L1
L2
6
8
8
10
12
12
16
16
20
16
20
25
16
20
25
30
3
4
4
7
7
7
10
10
12
12
15
19
12
15
19
22
32.5
32.5
32.5
32.5
39
45
45
49.5
49.5
52
52
52
56.5
56.5
56.5
56.5
12
12
14
14
15
17
17
20
20
22
22
22
26
26
26
26
O-Ring : Buna-N is standard
â
Viton are available on request
For Viton: Suffix code 'V' alongwith the part number of the fittings
Example : SKAR-10-6/ELV
If you have requirements other than above size and Dimensions,
please contact us with complete details
Dimensions are for reference only and are subject to change without notice.
76
T2
D2
30 O
O-RINGS
SEALEXCEL
PART NO.
APPROX. WT.
Kg per 10 pcs.
7.5 x 1.5
7.5 x 1.5
9 x 1.5
9 x 1.5
12 x 2
16.3 x 2.4
16.3 x 2.4
20.3 x 2.4
20.3 x 2.4
25.3 x 2.4
25.3 x 2.4
25.3 x 2.4
33.3 x 2.4
33.3 x 2.4
33.3 x 2.4
33.3 x 2.4
SKAR-10-6
SKAR-10-8
SKAR-12-8
SKAR-12-10
SKAR-16-12
SKAR-20-12
SKAR-20-16
SKAR-25-16
SKAR-25-20
SKAR-30-16
SKAR-30-20
SKAR-30-25
SKAR-38-16
SKAR-38-20
SKAR-38-25
SKAR-38-30
0.15
0.17
0.20
0.18
0.43
0.80
0.78
1.23
1.24
1.65
1.59
1.44
2.79
2.78
2.62
2.52
Suffixes the following material code along with above
part number while sending your enquiries / orders.
Material
Code
SS316L
SS304
EL
I
Example
SKAR-10-6/EL
SKAR-10-6/S
The material SS316Ti are available on request
WELD FITTINGS-ASK
SERIES : S- Heavy
S1
S2
O
D2
D2
T
L2
T
30
30 O
O-Ring
L1
SERIES
S-HEAVY
MAX. PRESSURE
PN
249
358
460
305
393
476
234
305
372
400
249
305
358
400
294
379
400
249
323
393
400
261
315
315
315
Tube
O. D.
T
SEAMLESS STEEL
ST. 35.4 NBK
10
10
10
12
12
12
16
16
16
16
20
20
20
20
25
25
25
30
30
30
30
38
38
38
38
10 x 1
10 x 1.5
10 x 2
12 x 1.5
12 x 2
12 x 2.5
6 x 1.5
16 x 2
16 x 2.5
16 x 3
20 x 2
20 x 2.5
20 x 3
20 x 4
25 x 3
25 x 4
25 x 5
30 x 3
30 x 4
30 x 5
30 x 6
38 x 4
38 x 5
38 x 6
38 x 7
Dimensions are in millimeters
D2
L1
L2
S1
S2
8
7
6
9
8
7
13
12
11
10
16
15
14
12
19
17
15
24
22
20
18
30
28
26
24
58
58
58
63
63
63
73.5
73.5
73.5
73.5
83.5
83.5
83.5
83.5
92.5
92.5
92.5
101.5
101.5
101.5
101.5
108
108
108
108
10
10
10
15
15
15
16.5
16.5
16.5
16.5
19
19
19
19
19.5
19.5
19.5
23
23
23
23
22
22
22
22
19
19
19
22
22
22
27
27
27
27
32
32
32
32
41
41
41
46
46
46
46
55
55
55
55
22
22
22
24
24
24
30
30
30
30
36
36
36
36
46
46
46
50
50
50
50
60
60
60
60
O-Ring : Buna-N is standard
â
Viton are available on request
For Viton: Suffix code 'V' alongwith the part number of the fittings
Example : ASK-10-6/ELV
Dimension L1 is approximate length with tightened nut.
The above part numbers are for complete fittings including Nut, Weld Nipple and Body.
Only body without Nut and Weld Nipple are available on request.
If you have requirements other than above size and Dimensions,
please contact us with complete details
Dimensions are for reference only and are subject to change without notice.
SEALEXCEL
PART NO.
ASK-10-8
ASK-10-7
ASK-10-6
ASK-12-9
ASK-12-8
ASK-12-7
ASK-16-13
ASK-16-12
ASK-16-11
ASK-16-10
ASK-20-16
ASK-20-15
ASK-20-14
ASK-20-12
ASK-25-19
ASK-25-17
ASK-25-15
ASK-30-24
ASK-30-22
ASK-30-20
ASK-30-18
ASK-38-30
ASK-38-28
ASK-38-26
ASK-38-24
APPROX. WT.
Kg per 10 pcs.
0.56
0.73
0.85
0.74
0.93
1.08
1.24
1.43
1.66
1.91
2.27
2.39
2.61
3.23
4.18
5.55
5.85
5.94
6.85
7.33
7.53
8.20
10.45
11.10
12.01
Suffixes the following material code along with above
part number while sending your enquiries / orders.
Material
Code
SS316L
SS304
EL
I
Example
ASK-10-6/EL
ASK-10-6/I
The material SS316Ti are available on request
77
BLANKING ENDS FOR TUBE-ROV
S1
S2
T
L2
L1
SERIES
L
Light
PN315
PN160
S
Heavy
PN 630
PN 400
PN 315
TUBE
O.D.
T
L1
L2
S1
S2
6
8
10
12
15
18
22
28
35
42
6
8
10
12
14
16
20
25
30
38
22
23
24
25
26
28
30
31
36
39
26
28
29
31
34
34
39
44
47
54
7
8
9
10
11
11.5
13.5
14.5
14.5
16
11
13
12.5
14.5
16
15.5
17.5
20
20.5
23
12
14
17
19
24
27
32
41
46
55
14
17
19
22
24
27
32
41
46
55
14
17
19
22
27
32
36
41
50
60
17
19
22
24
27
30
36
46
50
60
Dimensions are in millimeters
Dimension L1 is approximate length with tightened nut.
The above part numbers are for complete fittings including Nut, Bite Ring and Body.
Only body without Nut and Bite Ring are available on request.
If you have requirements other than above size and Dimensions,
please contact us with complete details
Dimensions are for reference only and are subject to change without notice.
78
SEALEXCEL
PART NO.
APPROX. WT.
Kg per 10 pcs.
ROV-6L
ROV-8L
ROV-10L
ROV-12L
ROV-15L
ROV-18L
ROV-22L
ROV-28L
ROV-35L
ROV-42L
ROV-6S
ROV-8S
ROV-10S
ROV-12S
ROV-14S
ROV-16S
ROV-20S
ROV-25S
ROV-30S
ROV-38S
0.19
0.28
0.37
0.5
0.82
1.19
1.63
2.24
3.49
5.19
0.35
0.48
0.65
0.84
1.13
1.38
2.27
4.32
5.2
8.09
Suffixes the following material code along with above
part number while sending your enquiries / orders.
Material
Example
Code
ROV-6L/EL
SS316L
EL
SS304
ROV-6L/I
I
The material SS316Ti are available on request
NUT - M
TUBE
SERIES O.D.
T
M
T
S2
L
Light
H1
Suffixes the following material code along with above
part number while sending your enquiries / orders.
Material
Code
SS316L
SS304
EL
I
Example
M-6L/EL
M-6L/I
S
Heavy
The material SS316Ti are available on request
6
8
10
12
15
18
22
28
35
42
6
8
10
12
14
16
20
25
30
38
Dimensions are in millimeters
M
M 12x1.5
M 14x1.5
M 16x1.5
M 18x1.5
M 22x1.5
M 26x1.5
M 30x2
M 36x2
M 45x2
M 52x2
M 14x1.5
M 16x1.5
M 18x1.5
M 20x1.5
M 22x1.5
M 24x1.5
M 30x2
M 36x2
M 42x2
M 52x2
H1
S2
15
15
16
16
17.5
18
20.5
21
24
24
16
16
17.5
18
20
21
24
26.5
29.5
32.5
14
17
19
22
27
32
36
41
50
60
17
19
22
24
27
30
36
46
50
60
PART NO.
NUT
APPROX. WT.
Kg per 10 pcs.
M-6L
M-8L
M-10L
M-12L
M-15L
M-18L
M-22L
M-28L
M-35L
M-42L
M-6S
M-8S
M-10S
M-12S
M-14S
M-16S
M-20S
M-25S
M-30S
M-38S
0.09
0.14
0.17
0.24
0.40
0.58
0.79
0.91
1.35
2.16
0.16
0.16
0.29
0.33
0.50
0.64
1.0
2.06
2.23
3.2
BITE RING - DPR
T
SERIES
L
Light
H2
S
Heavy
TUBE
O.D.
T
Dimensions are in millimeters
6
8
10
12
15
18
22
28
35
42
6
8
10
12
14
16
20
25
30
38
9.5
9.5
10
10
10
10
10.5
10.5
13.5
13.5
9.5
9.5
10
10
10
10.5
12.5
12.5
13
13.5
H2
PART NO.
BITE RING
APPROX. WT.
Kg per 10 pcs.
DPR-6LS
DPR-8LS
DPR-10LS
DPR-12LS
DPR-15L
DPR-18L
DPR-22L
DPR-28L
DPR-35L
DPR-42L
DPR-6LS
DPR-8LS
DPR-10LS
DPR-12LS
DPR-14S
DPR-16S
DPR-20S
DPR-25S
DPR-30S
DPR-38S
0.02
0.02
0.03
0.03
0.04
0.06
0.07
0.09
0.19
0.22
0.02
0.02
0.03
0.03
0.04
0.06
0.11
0.13
0.18
0.22
If you have requirements other
Suffixes the following material code along with above
than above size and Dimensions,
part number while sending your enquiries / orders.
please contact us with complete details
Material
Example
Code
Dimensions are for reference only and
are subject to change without notice.
DPR-6LS/EL
SS316L
EL
SS304
DPR-6LS/I
I
The material SS316Ti are available on request
79
REDUCING THREAD ADAPTORS-RI
MALE AND FEMALE THREAD : BSP (Parallel)
MALE STUD THREAD : with cutting face to DIN 3852 form B
L1
Cutting Face
BSP
D2
D1
BSP
BSP
B2
Cutting Face
S1
S1
BSP
D1
B1
B1
B2
L1
Fig. A
PN
630
630
630
630
630
400
630
630
630
400
630
400
400
400
400
250
400
400
400
400
250
250
400
400
400
400
250
250
250
250
250
250
250
250
250
250
Fig. B
MALE STUD
THREAD
BSP
FEMALE
THREAD
BSP
B1
B2
D1
D2
L1
S1
1/8
1/8
1/4
1/4
1/4
1/4
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
1/2
1/2
3/4
3/4
3/4
3/4
3/4
3/4
1
1
1
1
1
1
1-1/4
1-1/4
1-1/4
1-1/4
1-1/2
1-1/2
1-1/2
1-1/2
1/4
3/8
1/8
3/8
1/2
3/4
1/8
1/4
1/2
3/4
1/8
1/4
3/8
3/4
1
1-1/4
1/4
3/8
1/2
1
1-1/4
1-1/2
1/4
3/8
1/2
3/4
1-1/4
1-1/2
1/2
3/4
1
1-1/2
1/2
3/4
1
1-1/4
8
8
12
12
12
12
12
12
12
12
14
14
14
14
14
14
16
16
16
16
16
16
18
18
18
18
18
18
20
20
20
20
22
22
22
22
17
17
12
17
20
22
8
17
20
22
8
12
17
22
24.5
26.5
12
12
20
24.5
26.5
28.5
12
12
14
22
26.5
28.5
14
16
24.5
28.5
14
16
18
26.5
14
14
18
18
18
18
22
22
22
22
26
26
26
26
26
26
32
32
32
32
32
32
39
39
39
39
39
39
49
49
49
49
55
55
55
55
4
4
5
5
5
5
8
8
8
12
12
12
12
16
16
16
16
20
20
20
25
25
32
31
32
28
36
40
43
22.5
36
41
44
24
24
37
46
49
53
26
26
43
51
55
57
29
29
29
49
57
59
32
32
52
60
36
36
36
58
19
24
19
24
30
36
22
22
30
36
27
27
27
36
41
55
32
32
32
41
55
60
41
41
41
41
55
60
50
50
50
60
55
55
55
55
Dimensions are in millimeters
If you have requirements other than above size and Dimensions,
please contact us with complete details
Dimensions are for reference only and are subject to change without notice.
Fig.
SEALEXCEL
PART NO.
APPROX. WT.
Kg per 10 pcs.
B
B
B
B
B
B
A
B
B
B
A
A
B
B
B
B
A
A
B
B
B
B
A
A
A
B
B
B
A
A
B
B
A
A
A
B
RI-2RP-4RG
RI-2RP-6RG
RI-4RP-2RG
RI-4RP-6RG
RI-4RP-8RG
RI-4RP-12RG
RI-6RP-2RG
RI-6RP-4RG
RI-6RP-8RG
RI-6RP-12RG
RI-8RP-2RG
RI-8RP-4RG
RI-8RP-6RG
RI-8RP-12RG
RI-8RP-16RG
RI-8RP-20RG
RI-12RP-4RG
RI-12RP-6RG
RI-12RP-8RG
RI-12RP-16RG
RI-12RP-20RG
RI-12RP-24RG
RI-16RP-4RG
RI-16RP-6RG
RI-16RP-8RG
RI-16RP-12RG
RI-16RP-20RG
RI-16RP-24RG
RI-20RP-8RG
RI-20RP-12RG
RI-20RP-16RG
RI-20RP-24RG
RI-24RP-8RG
RI-24RP-12RG
RI-24RP-16RG
RI-24RP-20RG
0.39
0.63
0.38
0.67
1.16
1.70
0.39
0.68
1.25
1.83
0.66
0.56
0.91
1.82
2.21
4.82
1.03
8.70
1.43
2.35
4.81
5.60
1.95
1.79
1.57
2.68
5.03
5.85
3.08
2.66
4.58
6.16
4.70
4.02
3.37
5.42
Suffixes the following material code along with above
part number while sending your enquiries / orders.
Material
Code
Example
RI-2RP-4RG/EL
SS316L
EL
SS304
I
RI-2RP-4RG/I
The material SS316Ti are available on request
80
REDUCING THREAD ADAPTORS - RI
MALE AND FEMALE THREAD : BSP (Parallel)
MALE STUD THREAD : with ED Sealing
L1
ED Seal
BSP
S1
D2
BSP
D1
BSP
S1
BSP
D1
B1
B2
ED Sealing
B1
B2
L1
Fig. A
PN
630
630
630
630
630
630
630
630
630
400
630
630
630
400
400
400
400
400
400
400
400
315
400
400
400
400
400
315
400
400
400
315
315
315
315
315
MALE STUD
THREAD
BSP
1/8
1/8
1/4
1/4
1/4
1/4
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
1/2
1/2
3/4
3/4
3/4
3/4
3/4
3/4
1
1
1
1
1
1
1-1/4
1-1/4
1-1/4
1-1/4
1-1/2
1-1/2
1-1/2
1-1/2
Fig. B
FEMALE
THREAD
BSP
B1
B2
D1
D2
L1
S1
1/4
3/8
1/8
3/8
1/2
3/4
1/8
1/4
1/2
3/4
1/8
1/4
3/8
3/4
1
1-1/4
1/4
3/8
1/2
1
1-1/4
1-1/2
1/4
3/8
1/2
3/4
1-1/4
1-1/2
1/2
3/4
1
1-1/2
1/2
3/4
1
1-1/4
8
8
12
12
12
12
12
12
12
12
14
14
14
14
14
14
16
16
16
16
16
16
18
18
18
18
18
18
20
20
20
20
22
22
22
22
17
17
12
17
20
22
8
17
20
22
8
12
17
22
24.5
26.5
12
12
20
24.5
26.5
28.5
12
12
14
22
26.5
28.5
14
16
24.5
28.5
14
16
18
26.5
14
14
19
19
19
19
22
22
22
22
27
27
27
27
27
27
32
32
32
32
32
32
40
40
40
40
40
40
50
50
50
50
55
55
55
55
4
4
5
5
5
5
8
8
8
12
12
12
12
16
16
16
16
20
20
20
25
25
32
31
32
29
36
40
43
22.5
36
41
44
24
24
37
46
49
53
26
26
43
51
55
57
29
29
29
49
57
59
32
32
53
60
36
36
36
58
19
24
19
24
30
36
22
22
30
36
27
27
27
36
41
55
32
32
32
41
55
60
41
41
41
41
55
60
50
50
50
60
55
55
55
55
Dimensions are in millimeters
ED Seal : Buna-N is Standard
â
Viton are available on request
For Viton: Suffix code 'V' alongwith the part number of the fittings
Example : RI-2GED-4RG/ELV
If you have requirements other than above size and Dimensions,
please contact us with complete details
Dimensions are for reference only and are subject to change without notice.
FIG.
SEALEXCEL
PART NO.
APPROX. WT.
Kg per 10 pcs.
B
B
B
B
B
B
A
B
B
B
A
A
B
B
B
B
A
A
B
B
B
B
A
A
A
B
B
B
A
A
B
B
A
A
A
B
RI-2GED-4RG
RI-2GED-6RG
RI-4GED-2RG
RI-4GED-6RG
RI-4GED-8RG
RI-4GED-12RG
RI-6GED-2RG
RI-6GED-4RG
RI-6GED-8RG
RI-6GED-12RG
RI-8GED-2RG
RI-8GED-4RG
RI-8GED-6RG
RI-8GED-12RG
RI-8GED-16RG
RI-8GED-20RG
RI-12GED-4RG
RI-12GED-6RG
RI-12GED-8RG
RI-12GED-16RG
RI-12GED-20RG
RI-12GED-24RG
RI-16GED-4RG
RI-16GED-6RG
RI-16GED-8RG
RI-16GED-12RG
RI-16GED-20RG
RI-16GED-24RG
RI-20GED-8RG
RI-20GED-12RG
RI-20GED-16RG
RI-20GED-24RG
RI-24GED-8RG
RI-24GED-12RG
RI-24GED-16RG
RI-24GED-20RG
0.39
0.63
0.38
0.67
1.16
1.70
0.39
0.68
1.25
1.83
0.66
0.56
0.91
1.82
2.21
4.82
1.03
0.87
1.43
2.35
4.81
5.60
1.95
1.79
1.57
2.68
5.03
5.85
3.08
2.66
4.58
6.16
4.70
4.02
3.37
5.42
Suffixes the following material code along with above
part number while sending your enquiries / orders.
Material
Code
Example
SS316L
SS304
EL
I
RI-2GED-4RG/EL
RI-2GED-4RG/I
The material SS316Ti are available on request
81
BLANKING PLUGS FOR PORT TAPPING - VSTI
L1
Dimensions are
THREAD THREAD
MAX.
in millimeters
PRESSURE METRIC
BSP
B1 D1 L1 S6
Metric/BSP
S6
D1
B1
PN 400
ED Seal
PN 250
M 10x1
M 12x1.5
M 14x1.5
M 16x1.5
M 18x1.5
M 20x1.5
M 22x1.5
M 26x1.5
M 27x2
M 33x2
M 42x2
M 48x2
1/8
—
1/4
3/8
—
—
1/2
—
3/4
1
1-1/4
1-1/2
SEALEXCEL APPROX. SEALEXCEL APPROX.
PART NO. WT. Kg per PART NO. WT. Kg per
10 pcs.
10 pcs.
METRIC
BSP
14 12 5 VSTI-10MED
17 17 6 VSTI-12MED
19 17 6 VSTI-14MED
22 17 8 VSTI-16MED
24 17 8 VSTI-18MED
26 19 10 VSTI-20MED
27 19 10 VSTI-22MED
32 21 12 VSTI-26MED
32 21 12 VSTI-27MED
40 22.5 17 VSTI-33MED
50 22.5 22 VSTI-42MED
55 22.5 24 VSTI-48MED
8
12
12
12
12
14
14
16
16
16
16
16
ED Seal : Buna-N is standard
Vitonâ are available on request
For Viton: Suffix code 'V' alongwith
the part number of the fittings
Example :VSTI-2GED/ELV
Dimensions are for reference only and
are subject to change without notice.
0.07
0.14
0.20
0.25
0.32
0.42
0.51
0.78
0.79
1.30
1.98
2.63
VSTI-2GED
—
VSTI-4GED
VSTI-6GED
—
—
VSTI-8GED
—
VSTI-12GED
VSTI-16GED
VSTI-20GED
VSTI-24GED
0.07
--0.18
0.27
—
—
0.45
—
0.71
1.33
2.01
2.59
Suffixes the following material code along with above
part number while sending your enquiries / orders.
Material
Code
SS316L
SS304
EL
I
Example
VSTI-2GED/EL
VSTI-2GED/I
The material SS316Ti are available on request
BLANKING PLUGS FOR PORT TAPPING - VSTI
(accord. to SO 6149/DIN 3582-T3)
L1
MAX.
PRESSURE
B1
Metric
S6
D1
PN 630
O-Ring
PN 400
THREAD
METRIC
M 10x1
M 12x1.5
M 14x1.5
M 16x1.5
M 18x1.5
M 22x1.5
M 26x1.5
M 27x2
M 33x2
M 42x2
Dimensions are in millimeters
B1
D1
L1
S6
10
11.5
11.5
13
14.5
15.5
16
19
19
19.5
13
17
19
21
23
27
31
32
38
48
14
16.5
16.5
18
19.5
20.5
21
24
25.5
26
5
6
6
8
8
10
12
12
17
22
O-Ring : Buna-N is standard
Vitonâ are available on request
For Viton: Suffix code 'V' alongwith
the part number of the fittings
Example :VSTI-10MOR/ELV
If you have requirements other
than above size and Dimensions,
please contact us with complete details
Dimensions are for reference only and
are subject to change without notice.
82
O-RING
SEALEXCEL
PART NO.
APPROX. WT.
Kg per 10 pcs.
8.2x1.5
9.4x2.1
11.4x2.1
13.4x2.1
15.4x2.1
19.4x2.1
22.7x2.8
23.7x2.8
29.7x2.8
38.7x2.8
VSTI-10MOR
VSTI-12MOR
VSTI-14MOR
VSTI-16MOR
VSTI-18MOR
VSTI-22MOR
VSTI-26MOR
VSTI-27MOR
VSTI-33MOR
VSTI-42MOR
0.07
0.14
0.20
0.25
0.31
0.50
0.76
0.77
1.27
1.94
Suffixes the following material code along with above
part number while sending your enquiries / orders.
Material
Code
SS316L
SS304
EL
I
Example
VSTI-10MOR/EL
VSTI-10MOR/I
The material SS316Ti are available on request
BULKHEAD FITTINGS NUT-GM
SERIES /TUBE O.D.
H
Dimensions are in millimeters
M
S4
M
L
S
6
8
10
12
15
18
22
28
35
42
6
8
10
12
14
16
20
25
30
38
M 12x1.5
M 14x1.5
M 16x1.5
M 18x1.5
M 20x1.5
M 22x1.5
M 24x1.5
M 26x1.5
M 30x2
M 36x2
M 42x2
M 45x2
M 52x2
L
S4
6
6
6
6
6
7
7
8
8
9
9
9
10
17
19
22
24
27
30
32
36
41
46
50
55
65
SEALEXCEL
PART NO.
APPROX. WT.
Kg per 10 pcs.
GM-6L
GM-8L/6-S
GM-10L/8-S
GM-12L/10-S
GM-12L
GM-15L/14S
GM-16S
GM-18L
GM-22L/20S
GM-28L/25S
GM-30S
GM-35L
GM-42L/38S
0.07
0.08
0.11
0.12
0.15
0.22
0.24
0.37
0.46
0.60
0.58
0.75
1.23
Suffixes the following material code along with above
part number while sending your enquiries / orders.
Material
Code
SS316L
SS304
EL
I
Example
GM-6L/EL
GM-6L/I
The material SS316Ti are available on request
BLANKING PLUG TO FIT CONES-VKA
O-Ring
SERIES
T
L
Light
PN315
L1
PN160
S
heavy
PN 630
PN400
PN315
TUBE
O.D.
T
Dimensions are in millimeters
6
8
10
12
15
18
22
28
35
42
6
8
10
12
14
16
20
25
30
38
18.5
18.5
20
20.5
20.5
22.5
25
25.5
30
30
18.5
18.5
20
20.5
22.5
23.5
28.5
29
30.5
33
L1
O-Ring : Buna-N is standard
Vitonâ are available on request
For Viton: Suffix code 'V' alongwith
the part number of the fittings, Example :VKA-6L/ELV
If you have requirements other
than above size and Dimensions,
please contact us with complete details
Dimensions are for reference only and
are subject to change without notice.
O-RING
SEALEXCEL
PART NO.
APPROX. WT.
Kg per 10 pcs.
4x1.5
6x1.5
7.5x1.5
9x1.5
12x2
15x2
20x2
26x2
32x2.5
38x2.5
4x1.5
6x1.5
7.5x1.5
9x1.5
10x2
12x2
16.3x2.4
20.3x2.4
25.3x2.4
33.3x2.4
VKA-6L
VKA-8L
VKA-10L
VKA-12L
VKA-15L
VKA-18L
VKA-22L
VKA-28L
VKA-35L
VKA-42L
VKA-6S
VKA-8S
VKA-10S
VKA-12S
VKA-14S
VKA-16S
VKA-20S
VKA-25S
VKA-30S
VKA-38S
0.06
0.09
0.14
0.19
0.31
0.62
0.99
1.51
2.52
3.59
0.06
0.09
0.14
0.19
0.26
0.46
0.77
1.19
1.79
3.08
Suffixes the following material code along with above
part number while sending your enquiries / orders.
Material
Code
SS316L
SS304
EL
I
Example
VKA-6L/EL
VKA-6L/I
The material SS316Ti are available on request
83
SUPPORT SLEEVES-VH
Knurl
D1
D2
TUBE
I.D.
L1
4
4.5
5
6
6.5
7
8
9
10
10.5
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
30
31
32
33
34
38
39
Dimensions are in millimeters
D1
D2
L1
3.8
4.3
4.8
5.8
6.3
6.8
7.8
8.8
9.8
10.3
10.8
11.8
12.8
13.8
14.8
15.8
16.8
17.8
18.8
19.8
20.8
21.8
22.8
23.8
24.8
25.8
26.8
29.8
30.8
31.8
32.8
33.8
37.8
38.8
2.6
3.1
3.6
4.6
5.1
5.6
6.6
7.6
8.6
9.1
9.6
10.2
11.2
12.2
13.2
14.2
15.2
16.2
17.2
18.2
19.2
20.2
21.2
22.2
23.2
24.2
25.2
27.8
28.8
29.8
30.8
31.8
35.8
36.8
14
14
14
14
14
15.5
15.5
15.5
15.5
15.5
15.5
17
17
17
20
20
20
20
16
21.5
21.5
23.5
23.5
23.5
23.5
23.5
23.5
26.5
26.5
26.5
26.5
26.5
21
21
SEALEXCEL
PART NO.
APPROX. WT.
Kg per 10 pcs.
VH-4
VH-4.5
VH-5
VH-6
VH-6.5
VH-7
VH-8
VH-9
VH-10
VH-10.5
VH-11
VH-12
VH-13
VH-14
VH-15
VH-16
VH-17
VH-18
VH-19
VH-20
VH-21
VH-22
VH-23
VH-24
VH-25
VH-26
VH-27
VH-30
VH-31
VH-32
VH-33
VH-34
VH-38
VH-39
0.01
0.01
0.01
0.01
0.01
0.02
0.02
0.02
0.02
0.02
0.03
0.04
0.03
0.05
0.05
0.06
0.07
0.07
0.06
0.10
0.10
0.12
0.13
0.12
0.09
0.13
0.14
0.17
0.18
0.17
0.20
0.26
0.23
0.23
Suffixes the following material code along with above
part number while sending your enquiries / orders.
Material
Code
SS316L
SS304
EL
I
Example
VH-4/EL
VH-4/I
The material SS316Ti are available on request
If you have requirements other than above size and Dimensions,
please contact us with complete details
Dimensions are for reference only and are subject to change without notice.
84
SOFT SEALING RINGS - KD
(For Banjo Fittings WH/TH Series)
D2
Inner sealing ring
Material : PTFE
D1
H
Outer sealing ring
Material : Stainless Steel
FOR BSP THREAD
FOR MALE
STUD THREAD
BSP
1/8
1/4
3/8
1/2
3/4
1
1-1/4
1-1/2
Dimensions are in millimeters
D1
D2
H
17
22
27
32
41
46
57
64
10
13.5
17.1
21.4
26.8
33.5
42.4
48.4
2.5
3
3
4.5
3.5
3.5
3.5
3.5
SEALEXCEL
PART NO.
APPROX. WT.
Kg per 10 pcs.
KD-2G
KD-4G
KD-6G
KD-8G
KD-12G
KD-16G
KD-20G
KD-24G
0.02
0.04
0.06
0.12
0.17
0.18
0.26
0.32
SEALEXCEL
PART NO.
APPROX. WT.
Kg per 10 pcs.
KD-10M
KD-12M
KD-14M
KD-16M
KD-18M
KD-20M
KD-22M
KD-26M
KD-27M
KD-33M
KD-42M
KD-48M
0.02
0.05
0.04
0.06
0.07
0.08
0.11
0.18
0.16
0.18
0.26
0.32
FOR METRIC THREAD
FOR MALE
STUD THREAD
METRIC
M 10 x 1
M 12 x 1.5
M 14 x 1.5
M 16 x 1.5
M 18 x 1.5
M 20 x 1.5
M 22 x 1.5
M 26 x 1.5
M 27 x 2
M 33 x 2
M 42 x 2
M 48 x 2
Dimensions are in millimeters
D1
D2
H
17
22
2.5
27
29
32
32
41
41
46
57
64
10.3
12.3
14.3
16.4
18.4
20.4
22.4
26.4
27.4
33.5
42.4
48.4
2.5
3
3
3
3
3
4.5
3.5
3.5
3.5
3.5
3.5
If you have requirements other than above size and Dimensions,
please contact us with complete details
Dimensions are for reference only and are subject to change without notice.
85
METAL SEALING RING - DKA
(For Banjo Fittings WH/TH Series)
D1
D2
H
FOR BSP THREAD
FOR MALE
STUD THREAD
BSP
1/8
1/4
3/8
1/2
3/4
1
1-1/4
1-1/2
Dimensions are in millimeters
D1
D2
H
14
18
22
26
32
39
49
55
9.8
13.3
16.8
21.1
26.6
33.4
42.1
48.1
2.5
3
3
4.5
3.5
3.5
3.5
3.5
SEALEXCEL
PART NO.
APPROX. WT.
Kg per 10 pcs.
DKA-2G
DKA-4G
DKA-6G
DKA-8G
DKA-12G
DKA-16G
DKA-20G
DKA-24G
0.1
0.2
0.3
0.5
0.6
0.9
1.2
1.4
SEALEXCEL
PART NO.
APPROX. WT.
Kg per 10 pcs.
FOR METRIC THREAD
FOR MALE
STUD THREAD
METRIC
M 10 x 1
M 12 x 1.5
M 14 x 1.5
M 16 x 1.5
M 18 x 1.5
M 20 x 1.5
M 22 x 1.5
M 26 x 1.5
M 27 x 2
M 33 x 2
M 42 x 2
M 48 x 2
Dimensions are in millimeters
D1
D2
H
14
17
19
21
23
25
27
31
32
39
49
55
10.1
12.1
14.1
16.1
18.1
20.1
22.1
26.1
27.1
33.1
42.1
48.1
2.5
3
3
3
3
3
4.5
3.5
3.5
3.5
3.5
3.5
If you have requirements other than above size and Dimensions,
please contact us with complete details
Dimensions are for reference only and are subject to change without notice.
DKA-10M
DKA-12M
DKA-14M
DKA-16M
DKA-18M
DKA-20M
DKA-22M
DKA-26M
DKA-27M
DKA-33M
DKA-42M
DKA-48M
0.01
0.02
0.03
0.03
0.03
0.04
0.06
0.05
0.06
0.08
0.12
0.14
Suffixes the following material code along with above
part number while sending your enquiries / orders.
Material
Code
SS316L
SS304
EL
I
Example
KD-10M/EL
KD-10M/I
The material SS316Ti are available on request
86
SOFT SEALS - ED
(for male stud ends)
H
Dimensions are in millimeters
METRIC
D1
D2
BSP
M 10 x 1
M 12 x 1.5
M 14 x 1.5
M 16 x 1.5
--M 18 x 1.5
M 20 x 1.5
--M 22 x 1.5
M 26 x 1.5
M 27 x 2
M 33 x 2
M 42 x 2
M 48 x 2
G 1/8
--G 1/4
--G 3/8
----G½
--G 3/4
---G1
G 1-1/4
G 1-1/2
D1
D2
H
11.9
14.4
16.5
18.9
18.9
20.9
22.9
23.9
24.3
29.2
29.2
35.7
45.8
50.7
8.4
9.8
11.6
13.8
14.7
15.7
17.8
18.5
19.6
23.9
23.9
29.7
38.8
44.7
1
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
2
2
2
SEALEXCEL
PART NO.
ED-2G/10M
ED-12M
ED-4G/14M
ED-16M
ED-6G
ED-18M
ED-20M
ED-8G
ED-22M
ED-12G/26
ED-27M
ED-16G/33M
ED-20G/42M
ED-24G/48M
O-Ring : Buna-N is standard
Vitonâ are available on request
For Viton: Suffix code 'V' alongwith the part number of the fittings
Example :ED-2G/10M/V
Dimensions are for reference only and are subject to change without notice.
SEAL RINGS FOR PRESSURE GAUGE CONNECTORS - DK
H
D1
D2
FOR FEMALE
THREAD
BSP
G 1/4
G 1/2
Dimensions are in millimeters
D1
D2
H
11.3
18.5
6
12
4.5
5
SEALEXCEL
PART NO.
APPROX. WT.
Kg per 10 pcs.
DK-4G
DK-8G
0.02
0.05
Suffixes the following material code along with above
part number while sending your enquiries / orders.
Material
Code
SS316L
SS304
EL
I
Example
DK-4G/EL
DK-4G/I
The material SS316Ti are available on request
If you have requirements other than above size and Dimensions,
please contact us with complete details
Dimensions are for reference only and are subject to change without notice.
87
D2
O-RINGS - OR
For : GE - UNF, Weld Nipples,
Swivel Nuts, Banjo Fittings WH/TH
Pressure gauge connections
VSTI etc.
H
Dimensions are in millimeters
D2
H
SEALEXCEL
PART NO.
4
6
6.07
7.5
7.8
8
8.2
8.3
8.92
9
9.3
9.4
10
10.5
11.4
11.9
12
12.5
13
13.4
15
15.3
15.4
16
16.3
16.36
17
18
18.2
18.64
19.18
19.4
20
1.5
1.5
1.78
1.5
1.78
2.4
1.5
2.4
1.83
1.5
1.5
2.1
2
2.7
2.1
1.98
2
1.5
3
2.1
2
2.4
2.1
1.5
2.4
2.2
3
1.5
3
3.53
2.46
2.1
1.5
OR-4 x 1.5
OR-6 x 1.5
OR-6.07 x 1.78
OR-7.5 x 1.5
OR-7.8 x 1.78
OR-8 x 2.4
OR-8.2 x 1.56
OR-8.3 x 2.4
OR-8.92 x 1.83
OR-9 x 1.5
OR-9.3 x 1.5
OR-9.4 x 2.1
OR-10 x 2
OR-10.5 x 2.7
OR-11.4 x 2.1
OR-11.9 x 1.98
OR-12 x 2
OR-12.5 x 1.5
OR-13 x 3
OR-13.4 x 2.1
OR-15 x 2
OR-15.3 x 2.4
OR-15.4 x 2.1
OR-16 x 1.5
OR-16.3 x 2.4
OR-16.36 x 2.2
OR-17 x 3
OR-18 x 1.5
OR-18.2 x 3
OR-18.64 x 3.53
OR-19.18 x 2.46
OR-19.4 x 2.1
OR-20 x 1.5
Dimensions are in millimeters
D2
H
20
20
20.3
21.2
22.7
23.4
23.47
23.7
25
25
25.3
26
26
29.2
29.7
29.74
31
32
32.92
33
33.3
34.2
34.5
37.46
37.7
38
38.7
41
41.2
44.2
46
47.22
56.76
2
2.5
2.4
3
2.8
3.56
2.95
2.8
2
3.53
2.4
2
2.5
3
2.8
2.95
4
2.5
3.53
2.5
2.4
3
3.53
3
3.53
2.5
2.8
2.5
3
5.7
3
3.53
3.53
SEALEXCEL
PART NO.
OR-20 x 2
OR-20 x 2.5
OR-20.3 x 2.4
OR-21.2 x 3
OR-22.7 x 2.8
OR-23.4 x 3.56
OR-23.47 x 2.95
OR-23.7 x 2.8
OR-25 x 2
OR-25 x 3.53
OR-25.3 x 2.4
OR-26 x 2
OR-26 x 2.5
OR-29.2 x 3
OR-29.7 x 2.8
OR-29.74 x 2.95
OR-31 x 4
OR-32 x 2.5
OR-32.92 x 3.53
OR-33 x 2.5
OR-33.3 x 2.4
OR-34.2 x 3
OR-34.5 x 3.53
OR-37.46 x 3
OR-37.7 x 3.53
OR-38 x 2.5
OR-38.7 x 2.8
OR-41 x 2.5
OR-41.2 x 3
OR-44.2 x 5.7
OR-46 x 3
OR-47.22 x 3.53
OR-56.76 x 3.53
O-Ring : Buna-N is standard
Vitonâ are available on request
For Viton: Suffix code 'V' alongwith the part number of the fittings
Example :OR-20 x 2/V
If you have requirements other than above size and Dimensions,
please contact us with complete details
Dimensions are for reference only and are subject to change without notice.
88
â
SEALEXCEL OTHER PRODUCTS
For Instrumentation
Application
For Hydraulic
Application
Single/Twin
Ferrule Tube
Fittings
Precision
Pipe Fittings
& Adapters
For Pneumatic
Application
Quick Connect
Couplings
Stainless
Steel
Push in
Fittings
Swivel Joints
Flow Control
Regulators
Check Valves
Quick
Exhaust
Valves
Needle Valves
Check Valves
37O Flare
Tube Fittings
Quick
Connect
Couplings
Bar Stock
Body Needle/
Gauge/Root
Valves
Forged Body
Needle Valves
Ball Valves
Check Valves
89
NOTES
90
1/--pages
Пожаловаться на содержимое документа