close

Enter

Log in using OpenID

embedDownload
C
D
E
132'-0"
1
A4A
2'-8"
1
A3
33'-0"
2
A4A
1'-0" MIN.
EXISTING ADJACENT BUILDING
2 HR. FIRE-RATED WALLCONTINUE 10'-0" FROM CORNERUL DESIGN NO. 906 TO
UNDERSIDE OF STRUCTURE SEE SHEET T-2
2'-3"
107
4
2
A1
NOTE:
PROVIDE MOP HOLDER - SEE PLUMBING
SCHEDULE ON SHEET P-1, DETAIL 6/P-1.
ROOF ACCESS
LADDER ADD
BLOCKING TO
WALLS FOR
SUPPORT
103
3
3
7
1'-6"
3'-0"
1'-3"
8'-3"
6"
45 8"
105
104
3 5/8" 20 G.A. METAL. STUDS @ 16" O.C. UP TO
STRUCTURE ABOVE., FRONT WALL ONLY COVER W/ 1/2" GWB - PAINT PER INTERIOR
ELEVATIONS
A-4E
1
A3
2
A4
1
A4
5
A4C
4 1/2" ANODIZED ALUM. FRAME
STOREFRONT/CURTAINWALL
SEE SHEET A-4A
3
A4
1'-11"
1'-3"
2'-8"
30'-4"
2'-8"
30'-4"
8'-3"
3
2'-8" 2'-11" 3'-11 4"
30'-4"
103'-10"
16'-105 8"
31'-6"
27'-1"
63'-9"
OUT/OUT OF MASONRY
2
A3
1'-11"
3'-0"
2'-8"
SIGNAGE ABOVE DOOR STATING "THIS DOOR TO
REMAIN UNLOCKED WHEN BUILDING IS
OCCUPIED."
1
1'-6"
6"
WOMEN
MEN
5'-0" X 6'-0"
4" THICK CONC.
PAD
2
AUTOMATIC BI-PARTING DOOR
UNIT W/ INTEGRAL TRANSOM
WINDOW, SEE SHEET A-4a FOR
DIMENSIONS
8
1'-11"
2
3
41 8"
103
9
TOILET AND VESTIBULE WALLS TO BE 3 5/8"
METAL STUDS @ 16" O.C. COVER W/ 1/2" GWB
EACH SIDE TO UNDERSIDE OF CEILING TYPICAL.
HATCHED WALLS ARE TO BE BUILT TO
UNDERSIDE OF DECK ABOVE - PAINT PER
INTERIOR FINISH SCHEDULE.
4
A2
9"
2
5
VEST
1
7'-33 4"
1
3
A-4E
102
8"
14'-01 2"
8"
3'-113 4" 2'-11"
23'-4"
9"
4'-10"
132'-0"
OUT/OUT OF CMU
3
9"
SCALE:1/4" = 1'-0"
FLOOR PLAN
1
3
A2
SCALE:1/8" = 1'-0"
A-1
DOUBLE WYTHE BRICK
SITE WALL - REFER TO
CIVIL FOR EXACT
LOCATION
FIXTURE NOTE:
THIS FIXTURE PLAN IS NON-PROTOTYPICAL. G.C.
TO REQUEST A CR4 OR MOST CURRENT FIXTURE
PLAN FROM THE FAMILY DOLLAR PM PRIOR TO
ANY UNDERGROUND AND/OR SLAB WORK BEGINS.
METAL
HOLLOW CORE
METAL
HOLLOW CORE
4'-0"
3'-0"
3'-0"
SIZE
2, 5, 10
8"
3'-4"
MAX.
<
7'-0"
7'-0"
7'-0"
EXIT ALARM LOCATION. FOR
LOW RISK STORES.
DOOR SHOWN AS
LEFT SIDE LATCH
FROM INTERIOR
SURFACE
"B"
SEE DOOR
SCHEDULE FOR
LOUVER GRILLS
"C"
1
THICK
TYPE
MAT'L
LOCK
BUTTS
CLOSER
1 7/8"
A
ALUM./
GLASS
EMERGENCY
BREAKOUT
ALL HARDWARE AND WEATHER
STRIPPING BY DOOR MANUFACTURER
HAGAR BB1279 1 1/2
PR-5"x5" USP
SEE NOTES 8 AND 9
HARDWARE IS SPECIFIC TO
RISK CLASS OF STORE
HEAD
JAMB
SILL
12-A4A
13-A4A
14-A4A
15-A4A
16-A4A
11-A4A
REMARKS
TORMAX TX9200 OR STANLEY DOOR DURA-GLIDE
2000
2
1, 2, 3,
4, 8, 9
3
1 3/4"
B
H.M.
2, 6,
4
1 3/4"
D
ALUM./
ACRYLIC
"D"
YES,
PAINTED
ALL HARDWARE BY FIXTURE OR
ELIASON DOOR MANUFACTURER
2 PEEP SITES @ 5'-0" A.F.F AND 43" A.F.F. HARDWARE STATED IN
NOTES 8 AND 9 ARE PANIC STYLE ALARMS HARDWARE
ELIASON EASY SWING DOOR
SYSTEM: MODEL LWP-3, NO STOPS
ALL HARDWARE BY MFG
14'-0"
8"
HAGAR BB1279 1 1/2
PR-41 2"x41 2" USP
3, 7
5
1 3/4"
C
H.M.
2, 3
6
1 3/4"
C
H.M.
HAGAR BB1279 1 1/2
PR-41 2"x41 2" USP
2, 3
7
1 3/4"
C
H.M.
HAGAR BB1279 1 1/2
PR-41 2"x41 2" USP
8
1 3/4"
C
H.M.
HAGAR BB1279 1 1/2
PR-41 2"x41 2" USP
H.M.
HAGAR BB1279 1 1/2
PR-5"x5" USP
2'-8"
2"
AUTOMATIC BI-PARTING DOOR UNIT
2, 3
1, 2, 3, 4,
8, 9
9
1 3/4"
B
SCHLAGE
S280PD-626-JUP
SCHLAGE
B763P-626
DEADBOLT @ LEVER
KEYED SAME
YES,
PAINTED
YES,
SCHLAGE
AL70PD-626-JUP
PAINTED
YES,
PAINTED
SCHLAGE
AL40S-626-JUP
6-A4A
7-A4A
8-A4A
6-A4A
7-A4A
8-A4A
6-A4A
7-A4A
8-A4A
YES,
PAINTED
SEE NOTES 8 AND 9
HARDWARE IS SPECIFIC TO
RISK CLASS OF STORE
6-A4A
7-A4A
8-A4A
YES,
PAINTED
9-A4A
10-A4A
11-A4A
2- PEEP SITES @ 5'-0" AFF AND 43" AFF
SEPARATE DEAD-BOLT, KEYED W/THUMB TURN INSIDE,
PROVIDE LOCK GUARD DOOR SEE MECH. IF 12" X 12"
MTL. LOUVER IS REQUIRED.
2- PEEP SITES @ 5'-0" AFF AND 43" AFF
SEE MECH FOR 18" HT X 12" W
MTL. LOUVER
1.
2.
3.
NOTE: ALL EXT. EXIT DOOR THRESHOLDS
1 : 2 BEVEL MAX.
FOR DETEX ORDERS CONTACT: SECURITY SOURCE AT 978-983-81501 OR EMAIL: FDConstruction@SecuritySourse.com FAX 978-983-8361
WEBSITE: WWW.detex.COM
12 X 12 LOUVER
DOOR UNDERCUT 1" (TYP.)
12 X 12 LOUVER
HARDWARE STATED IN NOTES 8 AND 9 ARE PANIC STYLE
ALARMED HARDWARE
FIRE RATED DOOR IF REQUIRED BY CODE.
7.
"DO NOT LATCH DEADBOLT WHEN ROOM IS OCCUPIED". MOUNT SIGN AT DOOR IN OFFICE INTERIOR.
ALL DOOR HARDWARE TO MEET ADA REQUIREMENTS. DOOR TO MEET ADA DOOR OPENING PRESSURE GUIDELINES, MAX. 5 LBS (INT) & 10-15
LBS (EXTERIOR)
8.
RISK CLASS 0, 1, & 2 STORES USE DETEX V40-01 CRASH BAR WITHOUT ALARM, DETEX EAX 500 PILFER GUARD - TO BE JAMB MOUNTED,
MORTISE CYLINDER FOR EAX 500, AND DETEX DX BOLT - HINGE PIN SECURITY DEVICE.
ALL HOLLOW METAL DOORS AND FRAMES ARE TO BE PAINTED IN FIELD TO MATCH WALL SURFACE ON EACH SIDE PER EXTERIOR AND
INTERIOR FINISH SCHEDULES.
9.
RISK CLASS 3 & 4 STORES USE DETEX ECL-230X MULTI POINT LOCK AND RIM CYLINDER FOR ECL-230X
4.
ALL EXTERIOR DOORS (EXCEPT DOOR 1) - INSTALL BRUSH STYLE DOOR SWEEPS. USING SEALEAZE C380CLAO6BL (X) X=3', 3'-6" OR 4' (OR
EQUAL). * USE FOR DOORS 3, 9.
5.
STOREFRONT NOTE: PROVIDE MULLION HEAD RECEPTOR WHEN SNOW LOAD AT HEAD BEAM IS EQUAL TO OR GREATER THAN 20 PLF
6.
ELIASON DOOR, G.C. IS RESPONSIBLE FOR PROVIDING AND INSTALLING ELIASON DOOR AND HARDWARE. PROVIDE FAMILY DOLLAR APPROVED
10. AUTOMATIC BI-PARTING DOOR UNIT W/ INTEGRAL TRANSOM WINDOW. ALL GLASS SHALL BE 1" INSULATED AND TEMPERED
11. AUTOMATIC BI-PARTING DOOR UNIT W/ INTEGRAL TRANSOM WINDOW. ALL GLASS SHALL BE 1/2" CLEAR TEMPERED
1/2"
MAX.
DEVELOPER/GC/LANDLORD MUST USE THIS GROUND
FLOOR PLAN SHEET FOR THE PURPOSES OF
DIMENSIONAL AS-BUILT SUBMITTAL TO FAMILY
DOLLAR.
NOTE
Drawn By :
THIS STRUCTURE IS DESIGNED AROUND A
PRE-ENGINEERED METAL BUILDING STRUCTURE. THE
STRUCTURAL PLANS AND DETAILS ARE DESIGNED TO
A LOCAL FROST DEPTH, SOILS REPORT OR
STRUCTURAL CALCULATION MINIMUM DEPTH. THE
CONTRACTOR IS TO VERIFY DESIGN CRITERIA FOR
EACH SPECIFIC BUILDING LOCATION .
T.FINCH / T. JOHNSTON
Checked By :
D. MYERS
T. JOHNSTON
Revisions :
1
DOOR UNDERCUT 1" (TYP.) OR
"A"
DOOR TYPES
Seal
DOOR SCHEDULE
TEMPERED ALUMINUM DOOR
W/ ACRYLIC VIEW PANELS
3'-0"
16'-0"
TO CONTROL JOINT
A2A
7'-0"
A-1
ENLARGED TOILET PLAN
1/4"
MAX.
2
1
25'-4"
LENGTH OF SITE WALL
VERIFY W/ CIVIL
133'-6"
OUT/OUT OF MASONRY
10'-6"
7'-0"
5'-0
"
103
5
6'-0"
VESTIBULE
4'-4"
VESTIBULE
5'-0
"
45 8"
5
41 8"
9
A5
13'-53 8"
5'-0"
OFFICE
1
A-4E
8"
TO SITE WALL
VERIFY W/ CIVIL
103
101
31'-6"
54X60 AT PULL SIDE OF DOOR
BUILDING FOOTPRINT = 8,453 SQ FT
PUBLIC AREA = 7,248 SQ FT
SALES SUPPORT = 703 SQ FT
8'-73
5
SALES AREA
BREAK
AREA
63'-0"
OUT/OUT OF CMU
46X48 AT PUSH SIDE OF DOOR
2
9"
4
4' X 6' CANOPY
ABOVE
1
A4
28'-8"
60X56 CLEAR FLOOR AT TOILET
SIM
3'-8"
3
4
2'-8"
VESTIBULE
30X48 CLEAR FLOOR AT HAND DRYER
6'-0"
21'-4"
1
2
2
5'-0"
13267
3'-8"
4'-0"
45 8"
5'-4"
8
A5
5
A5
30X48 CLEAR FLOOR AT LAV &
FOUNTAIN
-CLEAR DIMENSIONS OF SALES AREA ARE TO ALL FINISHES. GALVALUME NARROW LINER PANEL IS ASSUMED
7/8" MAX. THICKNESS
61'-21 8" CLEAR
6'-43 4"
6'-61 8"
1
SALES
SUPPORT
3
106
TOILET ROOM CLEAR FLOOR NOTES:
4'-0"
4
1
A2
6'-0"
x
AT MOP SINK:
1/2" MOISTURE
RESISTANT GWB TO
DECK ABOVE AND FRP
W/ CLOSURE TRIM AT OFFICE
EACH END UP TO 4'-0"
102
A.F.F.
NO PLUMBING OR CONDUIT TO PASS UNDER
THE SALES FLOOR EXCEPT IN TOILET/ OFFICE
AND VEST AREA. ONLY EXCEPTION IS WAIST
LINE AT COOLER/FREEZER LOCATIONS.
ALL PLUMBING PIPING TO BE INSULATED IN
EXTERIOR WALL
ARCHITECT'S PROJECT #
FLUSH GWB INT. (TYP. BOTH SIDES OF SALES AREA). NO COL.
PROTRUSION INTO SALES AREA EXCEPT AT FRONT WALL. 3 5/8"
METAL STUDS @ 16" O.C. TO 12'-0" A.F.F SECURED TO BUILDING
STRUCTURE - COVER W/ 1/2" GWB PROVIDE CORNER BEAD AT TOP
OF WALL FOR FINISHED EDGE- PAINT PER INTERIOR FINISH
SCHEDULE
DESIGNER NOTE: NO EXCEPTIONS
18'-53 4"
x
8'-75 8"
2 HR. FIRE-RATED WALL UL DESIGN NO. 906 TO
UNDERSIDE OF STRUCTURE - SEE SHEET T-2
112'-81 2" CLEAR
-THE INTERIOR FINISHED WALLS OF THE SALES AREA MUST BE FLUSH WITH NO OBSTRUCTIONS OR
PROJECTIONS WITH EXCEPTION TO COLUMNS AT EACH SIDE OF THE STOREFRONT WHICH ARE TO BE
FURRED OUT AS SHOWN.
CHANGES TO THE EXTERIOR BUILDING MATERIAL OR STRUCTURAL ELEMENTS WILL REQUIRE THE BUILDING
BE ENLARGED TO MAINTAIN THE MIN. INTERIOR CLEAR DIMENSIONS.
4'-4"
8'-05 8"
8"
8'-0"
4"
4'-4"
45
26'-11 4"
2"
2 HR. FIRE-RATED WALLCONTINUE 10'-0" FROM CORNERUL DESIGN NO. 906 TO
UNDERSIDE OF STRUCTURE SEE SHEET T-2
107
63'-0"
OUT/OUT OF CMU
16'-81
64'-2"
OUT/OUT OF MASONRY
61
NOTES:
BREAK
AREA
8'-0"
8'-7"
COMMUNICATION
BOARD
LOCATION.
D3/4"XW96X48H
7'-105 8"
ELECT PANELS
AND VENSTAR
(EMS)
4" THICK CONC.
PAD IS FLUSH
WITH PAVING
(NOTE: PAD & 6"
DIA. BOLLARDS
ARE CENTERED
ON RECEIVING
DOOR
24'-53 4"
8'-0"
13'-11"
16'-9"
PAINTED STRIP - "DO
NOT BLOCK"
6" STUD WALL
FOR ELEC.
PANELS
ON REAR WALL OF SALES AREA, PROVIDE 7/8" HAT CHANNELS @ 24" O.C FROM FINISH FLOOR TO
STRUCTURE ABOVE. FASTEN 7/8" MAX. THK. GALVALUME NARROW CORRUGATED INTERIOR WALL PANEL
(FURNISHED BY GENERAL CONTRACTOR) TO THE HAT CHANNELS. PROVIDE METAL PANEL CLOSURES
(INSIDE & OUTSIDE CORNERS) AND CONTINUOUS 3/8" SEALANT JOINT WHERE METAL PANEL ABUTS
ADJACENT GYP. BOARD WALL FINISH. SEE INTERIOR ELEVATIONS FOR EXTENTS OF PANEL
WHITE LINER PANEL UP
TO STRUCTURE ABOVE
10'-0"
3'-0"
1
2'-8"
5"
1
+/- 49'-10"
FIELD VERIFY W/
EXISTING BUILDING
33'-0"
"REVIEWED"
"DISAPPROVED - RESUBMIT"
All Site and Building Plan Requirements, including but limited to, all
Interior Dimensions, Materials, Hardware, Equipment & Specifications,
are to be designed and built per the Family Dollar Prototype Plan
#:____________ as indicated in the lease, unless a deviation is
approved by Family Dollar's Plan Reviewer, next to each specific
deviation. The initials indicate approval of only the one deviation being
initialed. Any deviation from designated Prototype Plan that is not
initialed by Family Dollar is disapproved and void.
(Approval to plan deviation will be indicated with the following circled initials :_______ )
2
3
Date :
1/17/14
Sheet No.
DESIGN BASED ON 2013-01 FD PROTOTYPE
33'-0"
DOVER, DELAWARE
33'-0"
9"
FOR
DREAMWERKS, LLC
300 LOOCKERMAN STREET
B
FAMILY DOLLAR
A
2
A2A
1/--pages
Report inappropriate content